Peer-reviewed journal articles indexed in international databases

  1. Guillaume Altmeyer, Benoît Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Viscoelasticity behavior for finite deformations, using a consistent hypoelastic model based on Rivlin materials.
    Continuum Mechanics and Thermodynamics, 1–18.
    2016.
  2. Mingchuan Wang, Benoît Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    Incremental constitutive models for elastoplastic materials undergoing finite deformations by using a four-dimensional formalism.
    International Journal of Engineering Science 106, 199–219.
    https://doi.org/10.1016/j.ijengsci.2016.06.006, 2016.
  3. Benoît Panicaud, Emmanuelle Rouhaud, Guillaume Altmeyer, Mingchuan Wang, Richard Kerner, Arjen Roos, O. Ameline,
    Consistent hypo-elastic behavior using the four-dimensional formalism of differential geometry.
    Acta Mechanica 227(3), 651–675.
    2016.
  4. Guillaume Altmeyer, Emmanuelle Rouhaud, Benoît Panicaud, Arjen Roos, Richard Kerner, Mingchuan Wang,
    Viscoelastic models with consistent hypoelasticity for fluids undergoing finite deformations.
    Mechanics of Time-Dependent Materials 19(3), 375–395.
    2015.
  5. Gwénaëlle Proust, Delphine Retraint, Mahdi Chemkhi, Arjen Roos, Clemence Demangel,
    Electron backscatter diffraction and transmission Kikuchi diffraction analysis of an austenitic stainless steel subjected to surface mechanical attrition treatment and plasma nitriding.
    Microscopy and Microanalysis 21(04), 919–926.
    Cambridge University Press, 2015.
  6. Mingchuan Wang, Emmanuelle Rouhaud, Arjen Roos, Benoit Panicaud, Richard kerner, Olivier Ameline,
    Anisotropic elastic behaviour using the four-dimansional formalism of differential geometry.
    Computational Materials Science.
    2014.
  7. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Claude Garnier, Laurent Waltz, Clémence Demangel, Gwénaëlle Proust,
    The effect of surface mechanical attrition treatment on low temperature plasma nitriding of an austenitic stainless steel.
    Surface and Coatings Technology 221, 191–195.
    Elsevier, 2013.
  8. Laurent Waltz, Delphine Retraint, Arjen Roos,
    Semi-massive nanocrystallised composites: From the process to mechanical and microstructural investigations.
    Materials Science Forum 762, 487–492.
    Trans Tech Publications, 2013.
  9. Benoît Panicaud, Mahdi Chemkhi, Arjen Roos, Delphine Retraint,
    Theoretical modelling of iron nitriding coupled with a nanocrystallisation treatment. Application to numerical predictions for ferritic stainless steels.
    Applied Surface Science 258(17), 6611–6620.
    Elsevier, 2012.
  10. Johann Petit, Laurent Waltz, Guillaume Montay, Delphine Retraint, Arjen Roos, Manuel François,
    Multilayer modelling of stainless steel with a nanocrystallised superficial layer.
    Materials Science and Engineering: A 536, 124–128.
    Elsevier, 2012.
  11. Laurent Waltz, Delphine Retraint, Arjen Roos, Claude Garnier, Patrick Olier,
    Effect of interfacial oxidation occurring during the duplex process combining surface nanocrystallisation and co-rolling.
    Surface & coatings technology 205, 4608–4613.
    2011.
  12. N. Hfaiedh, Khemais Saanouni, Manuel François, Arjen Roos,
    Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials.
    Procedia Engineering 1(1), 229–232.
    2009.
  13. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    High Strength Nanocrystallized Multilayered Structure Obtained By SMAT And Co-rolling.
    Materials science forum 614, 249–254.
    2009.
  14. Sébastien Rouquette, Emmanuelle Rouhaud, Manuel François, Arjen Roos, Jean-Louis Chaboche,
    Coupled thermo-mechanical simulations of shot impacts: Effects of the temperature on the residual stress field due to shot peening.
    Journal of materials processing technology 209(8), 3879–3886.
    2009.
  15. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Combination of surface nanocrystallization and co-rolling: Creating multilayer nanocrystalline composites.
    Scripta materialia 60(1), 21–24.
    2009.

Unindexed peer-reviewed journal articles

  1. Altmeyer G., Benoit Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Viscoelasticity behavior for finite deformations, using a consistent hypoelatic model based on Rivlin materials.
    Continuum Mechanics and Thermodynamics 28, 1741–1758.
    2016.
  2. Sébastien Rouquette, Emmanuelle Rouhaud, Arjen Roos, Hervé Pron, Manuel François, Christian Bissieux,
    Thermomecanical modeling of a steel plate impacted by a shot and experimental validation.
    Materials science forum 524, 167–172.
    2006.

Proceedings articles indexed in international databases

  1. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Gwénaëlle Proust, Laurent Waltz,
    Microstructural evolution of a 316L alloy subjected to surface nanocrystallisation and low-temperature plasma nitriding.
    The 15th International Conference on Advances in Materials & Processing Technologies (AMPT 2012), Wollongong, NSW Australia., September 2012, 6.
    2012.
  2. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Guillaume Montay, Laurent Waltz,
    Evolution of the residual stress state after surface mechanical attrition treatment and low temperature plasma nitriding.
    The 9th International Conference on Residual Stresses (ICRS9), Garmisch-Partenkirchen,Germany, October 2012, 1.
    2012.
  3. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Laurent Waltz, Clémence Demangel,
    Influence of surface mechanical attrition treatment on low temperature plasma nitriding of medical grade austenitic stainless steel.
    European Congress and Exhibition on Advanced Materials and Processes, Montpellier, France, September 2011, 1.
    2011.
  4. N. Hfaiedh, Khemais Saanouni, Manuel François, Arjen Roos,
    Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials.
    Procedia Engineering 1(1), 229–232.
    2009.
  5. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Experimental investigation on a nanocrystallized multilayered structure obtained with a duplex treatment: SMAT and co-rolling.
    7th EUROMECH Solid Mechanics, Lisbonne, Septembre 2009, 6.
    2009.
  6. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    HIGH STRENGTH NANOCRYSTALLIZED MULTILAYERED STRUCTURE OBTAINED BY SMAT AND CO-ROLLING.
    The 6th International Forum on Advanced Material Science and Technology (IFAMST , HONG KONG, June 2008.
    2008.
  7. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    COMBINATION OF THE SMA-TREATMENT AND THE CO-ROLLING PROCESS FOR THE PRODUCTION OF A NANOSTRUCTURED COMPOSITE STRUCTURE.
    The Tenth International Conference of Shot Peening (ICSP 10), TOKYO, September 2008, 6.
    2008.
  8. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    21st International Conference on Surface Modification Technologies (SMT21), PARIS, September 2007, 9.
    2007.
  9. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    GLOBAL BEHAVIOR OF A NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    International Conference on Experimental Mechanics 13 (ICEM13), ALEXANDROUPOLIS, July 2007, 10.
    2007.
  10. Florent Cochennec, Emmanuelle Rouhaud, Delphine Retraint, Sébastien Rouquette, Arjen Roos,
    Analysis of the impact of a shot at low velocity using the finite element method. Application to the ultrasonic shot peening process.
    Materials science forum 524-525, 337–342.
    2006.

Unindexed proceedings articles

  1. Emmanuelle Rouhaud, Olivier Ameline, Benoit Panicaud, Richard Kerner, Arjen Roos,
    On the use of a four-dimensional formalism to build linear or non-linear isotropic hypo-elastic behaviors with the Lie derivative.
    Proceedings of the 3rd International Conference on Material Modelling (ICMM3), Varsovie, Pologne.
    2013.
  2. Souhail Ben Afia, Delphine Retraint, Benoît Panicaud, Emmanuelle Rouhaud, Arjen Roos, Léa Le Joncour, Matthieu Micoulaut,
    Modélisation par transition d’échelles de la nanocristallisation d’un acier 316L par le procédé SMAT.
    11e Colloque National en Calcul des Structures (CSMA 2013).
    2013.
  3. Gwénaëlle Proust, Mélanie Gilles, Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Laurent Waltz,
    Microstructural Evolution of Stainless Steel after Surface Mechanical Attrition Treatment and Nitriding.
    The 5th International Conference on Recrystallization and Grain Growth (ReX GG 2013), Sydney (Australia).
    2013.
  4. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Laurent Waltz,
    Influence of a Nanocrystalline surface layer combined with low temperature plasma Nitriding on Microstructure and Tribological Properties of a stainless steel.
    International conference on Materials Innovations in Surface Engineering (MISE 2013), Adelaide (Australia).
    2013.
  5. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Guillaume Montay, Clémence Demangel,
    Duplex surface treatments combining surface mechanical attrition treatment (SMAT) and low temperature plasma nitriding.
    The 12th International Workshop on Plasma-Based Ion Implantation and Deposition, Poitiers (France), July 4.
    2013.
  6. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Analyse mécanique et microstructurale d'un matériau multicouches élaboré par co-laminage de tôles nanostructurées par SMAT.
    19ème Congrès Français de Mécanique (CFM19), Marseille, Août 2009, 6.
    2009.
  7. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    Comportement mécanique d'une structure multicouche obtenue par co-laminage de tôles nanostructurées par SMAT.
    18ème Congrès Français de Mécanique (CFM2007) , GRENOBLE, Août 2007, 6.
    2007.

Conference talks with no proceedings

  1. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    Constitutive models for elastoplasticity from a 4D thermodynamic construction and its applications to the simulation of large deformations.
    NUMIFORM Troyes, France.
    2016.
  2. Guillaume Altmeyer, Emmanuelle Rouhaud, Benoit Panicaud, Mingchuan Wang, Richard Kerner, Arjen Roos,
    Viscoelasticity modeling in finite transformations using Lie derivative. Application to Maxwell time models..
    24th International Workshop on Computational Micromechanics of Materials (IWCMM24), Madrid, Spain,.
    2014.
  3. Emmanuelle Rouhaud, O. Ameline, Guillaume Altmeyer, Benoit Panicaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Construction of frame-indifferent constitutive models for viscoelastic materials undergoing finite transformations with the four-dimensional formalism of the theory of relativity.
    9th International Conference on the Mechanics of Time-Dependent Materials (MTDM), Montréal.
    2014.
  4. Benoit Panicaud, Mingchuan Wang, Emmanuelle Rouhaud, Arjen Roos, Richard Kerner,
    On the use of a four-dimensional formalism to build linear or non-linear anisotropic elastic behaviors. Application to micromechanical problems.
    International workshop on Computational mechanics of Materials (IWCMM XXIII) Singapore,.
    2013.
  5. Benoit Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    On the use of a four-dimensional formalism to build hypo-elastic or visco-elastic constitutive behavior models.
    Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), Montréal, Canada.
    2013.
  6. Gwénaëlle Proust, Mélanie Gillles, Laure Aschehoug, Pat Trimby, Mahdi Chemkhi, Delphine Retraint, Arjen Roos,
    Microstructural evolution of stainless steel after surface treatments.
    Workshop Nanospec on EBSD, Sydney, November 2012.
    2012.
  7. S. Rouquette, Emmanuelle Rouhaud, Arjen Roos, H. Pron, Manuel François, C. Bissieux,
    Thermomechanical modeling of a steel plate impacted by a shot and experimental validation..
    The 7th European Conference on Residual Stresses (ECRS7), Berlin Allemagne, 13-15 septembre 2006..
    2006.

Conference posters

  1. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, Guillaume Altmeyer, Richard Kerner, Arjen Roos,
    Incremental constitutive equation for elastoplasticity in finite transformations using a four-dimensional formalism..
    Multi-Physics modeling of solids (MPMS) Palaiseau, France.
    2014.