Peer-reviewed journal articles indexed in international databases

  1. Evangelia Diamantopoulou, Weje Liu, Carl Labergère, Houssem Badreddine, Khemais Saanouni, P. Hu,
    Micromorphic constitutive equations with damage applied to metal forming.
    International Journal of Damage Mechanics DOI: 10.1177/1056789516684650(DOI: 10.1177/1056789516684650).
    SAGE, 2017.
  2. Evangelia Diamantopoulou, Carl Labergere, Khemais Saanouni,
    Non local damage based on micromorphic formulation.
    19th ESAFORM Conference, AIP Conference Proceedings, 27-29 April 2016, Nantes 1769.
    2016.
  3. Houssem Badreddine, Carl Labergère, Khemais Saanouni,
    Ductile damage prediction in sheet and bulk metal forming.
    Comptes Rendus Mécanique 344, 296–318.
    ELSEVIER, 2016.
  4. Carl Labergère, Khemais Saanouni, Zhidan Sun, Mohamed Ali Dhifallah, Yisa Li, Jean-louis Duval,
    Prediction of low cycle fatigue life using cycles jumping integration scheme.
    Applied Mechanics and Materials 784, 308–316.
    Trans Tech Publications, 2015.
  5. Sabeur Msolli, Houssem Badreddine, Carl Labergere, Marion Martiny, Guillaume Robin, Mohamed Jrad, Khemais Saanouni, François Choquart,
    Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets.
    International Journal of Mechanical Sciences 99, 262–273.
    ELSEVIER, 2015.
  6. Carl Labergère, Bruno Guelorget, Manuel François,
    Strain Rate Distribution and Localization Band Width Evolution during Tensile Test.
    International Journal of Solids and Structures 51(23-24), 3944–3961.
    Elsevier, 2014.
  7. Carl Labergère, Alain Rassineux, Khemais Saanouni,
    Numerical simulation of continuous damage and fracture in metal-forming processes with 2D mesh adaptive methodology.
    Finite Elements in Analysis & Design 82, 46–61.
    Elsevier, 2014.
  8. Fanjuan Meng, Carl Labergère, Pascal Lafon, Mathieu Duguy, Laurent Daniel,
    Multi-objective optimization based on meta-models of an aeronautical hub including the ductile damage constraint.
    International Journal of Damage Mechanics 23, 1055–1076.
    SAGE, 2014.
  9. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Modelling and numerical simulation of thick sheet double slitting process using continuum damage mechanics.
    International Journal of Damage Mechanics 23, 1150–1167.
    SAGE, 2014.
  10. Yuchen Zhao, Carl Labergère, Benoît Panicaud, Jean-Luc Grosseau-Poussard, Philippe Goudeau,
    Modeling of stress and strain fields induced during the Smart-Cut process on silicon. Influence of different couplings for diffusion of hydrogen at a microscopic scale.
    Advanced Materials Research 996, 707–712.
    Trans Tech Publications, 2014.
  11. Yuchen Zhao, Carl Labergère, Benoit Panicaud, Jean Grosseau-Poussard, Pascal Goudeau,
    Modeling of stress and strain fields induced during the Smart-Cut process on silicon. Influence of different couplings for diffusion of hydrogen at a microscopic scale.
    Advanced Materials research 996, 707–712.
    Materials science and engineering, 2014.
  12. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Numerical simulation of thick sheet slitting processes: Modelling using continuum damage mechanics.
    AIP Conference Proceedings 1532, 339–344.
    2013.
  13. Yosr Ghozzi, Carl Labergère, Pierre Villon,
    Numerical simulation based on FEM/MLS coupling for solid mechanics.
    Computational Plasticity XII: Fundamentals and Applications - Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013, 843–853.
    2013.
  14. Fanjuan Meng, Carl Labergère, Pascal Lafon, Laurent Daniel,
    Multi-objective optimization of gear forging process based on adaptive surrogate meta-models.
    AIP Conference Proceedings 1532, 637–643.
    2013.
  15. Carl Labergère, Jean-Claude Gelin,
    Numerical simulation of sheet hydroforming taking into account analytical pressure and fluid flow.
    Journal of Materials Processing Technology 212(10), 2020–2030.
    2012.
  16. Mazen Issa, Carl Labergère, Khemais Saanouni, Alain Rassineux,
    Numerical prediction of thermomechanical field localization in orthogonal cutting.
    CIRP Journal of Manufacturing Science and Technology 5, 175–195.
    2012.
  17. Mazen Issa, Khemais Saanouni, Carl Labergère, Alain Rassineux,
    Prediction of serrated chip formation in orthogonal metal cutting by advanced adaptive 2D numerical methodology.
    International Journal of Machining and Machinability of Materials 9(3/4), 295–315.
    2011.
  18. Carl Labergère, Sebastien Remy, Pascal Lafon, A. Delespierre, Laurent Daniel, G. Kang,
    Benchmark of a forging process with a hammer: Comparison between fem simulation results and real part shapes using 3D digitising scanner.
    Mecanique et Industries 12(3), 215–222.
    2011.
  19. Khemais Saanouni, Philippe Lestriez, Carl Labergère,
    2D adaptive simulations in finite thermo-elasto-viscoplasticity with ductile damage : Application to orthogonal metal cutting by chip formation and breaking.
    International Journal of Damage Mechanics 20(1), 23–61.
    Sage, 2011.
  20. Carl Labergère, Alain Rassineux, Khemais Saanouni,
    2D adaptive mesh methodology for the simulation of metal forming processes with damage.
    International Journal of Materials Forming 4(3), 317–328.
    Springer, 2011.
  21. Khemais Saanouni, Philippe Lestriez, Carl Labergère,
    2D adaptive FE simulations in finite thermo-elasto-viscoplasticity with ductile damage: Application to orthogonal metal cutting by chip formation and breaking.
    International Journal of Damage Machanics 20, 23–61.
    2011.
  22. Houssem Badreddine, Carl Labergere, Khemais Saanouni, Wajdi Rajhi, Alain Rassineux, Dominic Kircher,
    elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    Int. J. of Metal Forming 1, 109–112.
    Springer, 2008.

Proceedings articles indexed in international databases

  1. Weijie Liu, Khemais Saanouni, Carl Labergère, Houssem Badreddine, Samuel Forest, Ping Hu,
    Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature.
    MATEC Web of Conferences 80(01002), 7.
    2016.
  2. Zohra Sendi, Hédi Belhadjsalah, Carl Labergere, Khemais Saanouni,
    An Element Free Galerkin method for an elastoplastic coupled to damage analysis.
    MATEC Web of Conferences 80(07005), 7.
    2016.
  3. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    MATEC Web of Conferences 80(01001).
    2016.
  4. Carl Labergère, Khemais Saanouni, Souhail Benafia, Joel Galmiche, Husein Soulaiman,
    Numerical simulation of fine blanking process using fully coupled advanced constitutive equations with ductile damage.
    11th International Conference on Numerical Methods in Industrial Forming, NUMIFORM’2013 NUMIFORM’2013, July 6-10, 2013, Shenyang, China, 6.
    2013.
  5. Fanjuan Meng, Carl Labergère, Pascal Lafon, Laurent Daniel,
    Multi-objective optimization of gear forging process based on adaptive surrogate meta-models.
    AIP Conference Proceedings 1532, 637–643.
    American Institute of Physics Inc., 2013.
  6. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Modelling and numerical simulation of thick sheets slitting using continuum damage mechanics,.
    11th International Conference on Numerical Methods in Industrial Forming, NUMIFORM’2013 NUMIFORM’2013, July 6-10, 2013, Shenyang, China, 6.
    2013.
  7. Ali Halouani, Fanjaun Meng, Yu-Ming Li, Carl Labergère, Boussad Abbès, Pascal Lafon, Ying-Qiao Guo,
    Forging tool shape optimization using pseudo inverse approach and adaptive incremental approach.
    AIP Conference Proceedings 1532, 95–103.
    American Institute of Physics Inc., 2013.
  8. Saber Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 Barcelona 3-5 September 2013, Spain.
    2013.
  9. Donato Gallitelli, Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Carl Labergère, Manuel François,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    9th International Conference on Residual Stresses (ICRS-9), Garmisch-Partenkirchen, October 2012, 6.
    2012.
  10. M. Malekipour Gharbi, Carl Labergère, Houssem Badreddine, C. Soyarslan, A. Weinrich, M. Hermes, S. Chatti, H. Sulaiman, Khemais Saanouni, E. Tekkaya,
    Advanced experimental-numericla investigations of cold bending of high strength steels.
    International conference on technology of plasticity, dortmund, September 2011, 6.
    2011.
  11. Wajdi Rajhi, Khémaïs Saanouni, Houssem Badreddine, Carl Labergère,
    Simulation numérique de l¿endommagement dans quelques procédés de formage plastique d'un acier de hautes performances.
    COTUME¿2008: Congrès Tunisien de Mécanique , Hammamet, Tunisie, Mars 2008, 6.
    2008.
  12. Houssem Badreddine, Carl Labergère, Khémaïs Saanouni, Wajdi Rajhi, Alain Rassineux, Dominique Kircher,
    F.E. elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    ESAFORM 2008, Lyon, April 2008, 6.
    2008.

Unindexed proceedings articles

  1. Evangelia Diamantopoulou, Carl Labergere, Bruno Guelorget, Manuel François, Khemais Saanouni,
    An experimental-numerical study of the plastic flow localization based on a generalized micromorphic formulation.
    Proceedings of the 5th International Conference on Material Modeling (ICMM5).
    2017.
  2. F. Wang, Alain Rassineux, Carl Labergere, Khemais Saanouni,
    Improving 3D complex crack propagation in tetrahedral element.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  3. Mohamed Ali Dhifallah, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Fatigue Life prediction methodology applied to 3D mechanical component.
    2th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  4. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes..
    , 12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  5. Zohra Sendi, Houssem Badreddine, Carl Labergere, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  6. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 , pp. 1066-1074, Barcelona 3-5 September 2013, Spain, 6 pages.
    2013.
  7. Carl Labergère, Houssem Badreddine, Wajdi Rajhi, Khémaïs Saanouni, Alain Rassineux,
    Caractérisation numérique de l'endommagement ductile d¿aciers à hautes performances. Essais d¿expansion et de pliage.
    CFM'2009:XIXème congrès Français de Mécanique, Marseille, Août 2009, 6.
    2009.

Conference talks with no proceedings

  1. Van Tuan Dang, Pascal Lafon, Carl Labergere, Laurent Daniel,
    Surrogate models for sheet metal stamping problem based on the combination of Proper Orthogonal Decomposition and Radial Basis Function.
    Engineering Mechanics Institute International Conference.
    American Society of Civil Engineers, 2016.
  2. Carl Labergere, Khemais Saanouni, F. Bumbieler,
    Modeling and Simulation of the long term mechanical behavior of a steel casing subjected to general corrosion.
    EMI International Conference, Metz, France, 25-27 October, 2016.
    2016.
  3. Carl Labergere, Khemais Saanouni, F. Bumbieler,
    Modeling and Simulation of the long term mechanical behavior of a steel casing subjected to general corrosion.
    EMI International Conference, Metz, France, 25-27 October, 2016.
    2016.
  4. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, Jawad Badreddine, Carl Labergère, Manuel Francois,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  5. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling and numerical simulation of ductile damage in cold bulk metal forming.
    46th ICFG Plenary Meeting, Paris September 15th to 18th, 2013.
    2013.
  6. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    On the modelling of initial and induced anisotropies for the accurate numerical simulation of sheet and bulk metal forming processes.
    FTF'2009: Forming Technology Forum, Zurich, Suisserland, May 2009.
    2009.
  7. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling in metal forming including the ductile damage occurrence.
    PLASTICITY 2009, Saint Thomas, USA, January 2009.
    2009.

Conference posters

  1. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni, Manuel François, Virginie Lacote,
    Experimental Characterization and Comparison of Plane and Corrugated Aluminium Sheets Behavior.
    ESAFORM 2013, Aveiro University, 22-24 avril 2013, Portugal.
    2013.

Scientific books (or chapters)

  1. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.
  2. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine, ,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.