Peer-reviewed journal articles indexed in international databases

  1. Zhidan Sun, Delphine Retraint, Thierry Baudin, Anne-Laure Helbert, François Brisset, Mahdi Chemkhi, Jianqiang Zhou, Pascale Kanouté,
    Experimental study of microstructure changes due to low cycle fatigue of a steel nanocrystallised by Surface Mechanical Attrition Treatment (SMAT).
    Materials Characterization 124, 117–121.
    Elsevier, 2017.
  2. Jianqiang Zhou, Zhidan Sun, Pascale Kanouté, Delphine Retraint,
    Effect of surface mechanical attrition treatment on low cycle fatigue properties of an austenitic stainless steel.
    International Journal of Fatigue 103, 309–317.
    2017.
  3. Gwénaëlle Proust, Patrick Trimby, Sandra Piazolo, Delphine Retraint,
    Characterization of Ultra-Fine Grained and Nanocrystalline Materials Using Transmission Kikuchi Diffraction.
    Journal of Visualized Experiments 2017(122), e55506.
    http://www.jove.com/video/55506, 2017.
  4. Chongpu Zhai, Yixiang Gan, Dorian Hanaor, Gwénaëlle Proust, Delphine Retraint,
    The Role of Surface Structure in Normal Contact Stiffness.
    Experimental Mechanics 56(3), 359–368.
    Springer US, 2016.
  5. Donato Gallitelli, Vincent Boyer, Maxime Gelineau, Yann Colaitis, Emmanuelle Rouhaud, Delphine Retraint, Régis Kubler, Marc Desvignes, Laurent Barrallier,
    Simulation of shot peening: From process parameters to residual stress fields in a structure.
    Comptes Rendus - Mecanique 344(4-5), 355–374.
    Elsevier, 2016.
  6. Zhidan Sun, Delphine Retraint, Bruno Guelorget, Laurent Waltz,
    Micro-pillar compression tests to characterize the mechanical behavior of a nanocrystalline layer induced by SMAT in a 316L stainless steel.
    Matériaux & Technique 103(3), 304.
    EDP Sciences, 2015.
  7. Joël Faure, Richard Drevet, Nader Ben Jaber, Sylvain Potiron, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Electrophoretic Deposition of Hydroxyapatite and 58S Bioactive Glass Coatings on the Ti6Al4V Alloy Subjected to Surface Mechanical Attrition Treatment.
    Key Engineering Materials 654, 149–153.
    2015.
  8. Gwénaëlle Proust, Delphine Retraint, Mahdi Chemkhi, Arjen Roos, Clemence Demangel,
    Electron backscatter diffraction and transmission Kikuchi diffraction analysis of an austenitic stainless steel subjected to surface mechanical attrition treatment and plasma nitriding.
    Microscopy and Microanalysis 21(04), 919–926.
    Cambridge University Press, 2015.
  9. Wiem Toumi Ajimi, Delphine Retraint, Guillaume Montay,
    Structure-mechanical property relationship in hot-dip galvanized S355K2+N steel plates.
    Advanced Materials Research 996, 884–889.
    Trans Tech Publications, 2014.
  10. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Preface.
    Advanced Materials Research 996.
    2014.
  11. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Jean-Luc Grosseau-Poussard,
    Influence of surface mechanical attrition treatment on the oxidation behavior of 316L stainless steel at 750°C.
    Materials Science and Engineering 63, 012014.
    IOP Science, 2014.
  12. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Jean-Luc Grosseau Poussard,
    Influence of surface mechanical attrition treatment (SMAT) on oxidation behavior of 316L stainless steel at 650°c.
    Advanced Materials Research 996, 906–911.
    Trans Tech Publications, 2014.
  13. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on a titanium alloy.
    Advanced Materials Research 996, 964–968.
    Trans Tech Publications, 2014.
  14. Clémence Demangel, Arnaud Poznanski, Véronique Steenhout, Alexandra Levesque, Hicham Benhayoune, Delphine Retraint,
    Benefit of a surface nanocrytallization treatment on Co28Cr6Mo abrasive wear properties.
    Advanced Materials Research 966-967, 435–441.
    Trans Tech Publications, 2014.
  15. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Claude Garnier, Laurent Waltz, Clémence Demangel, Gwénaëlle Proust,
    The effect of surface mechanical attrition treatment on low temperature plasma nitriding of an austenitic stainless steel.
    Surface and Coatings Technology 221, 191–195.
    Elsevier, 2013.
  16. Laurent Waltz, Delphine Retraint, Arjen Roos,
    Semi-massive nanocrystallised composites: From the process to mechanical and microstructural investigations.
    Materials Science Forum 762, 487–492.
    Trans Tech Publications, 2013.
  17. Benoît Panicaud, Jean-Luc Grosseau-Poussard, Delphine Retraint, Mathieu Guérain, Li Li,
    On the mechanical effects of a nanocrystallisation treatment for ZrO2 oxide films growing on a zirconium alloy.
    Corrosion Science 68, 263–274.
    Elsevier, 2013.
  18. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Léa Le Joncour, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Modelling of grain refinement induced by SMAT process, using a complete numerical chaining methodology.
    Materials Science Forum 762, 295–300.
    Trans Tech Publications, 2013.
  19. Yuanyuan Pi, Joël Faure, Guéba Agoda, Caroline Andreazza, Sébastien Potiron, Alexandra Levesque, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Microstructural characterization of Ti-6Al-4V alloy subjected to the duplex SMAT/plasma nitriding.
    Microscopy Research and Technique 76(9), 897–903.
    Wiley, 2013.
  20. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Sébastien Remy, Delphine Retraint, Manuel François,
    Effect of the confinement on the properties of ultrasonic vibrated granular gases.
    Granular Matter 15(3), 367–376.
    Elsevier, 2013.
  21. Sami Jelliti, Caroline Richard, Delphine Retraint, Thierry Roland, Mahdi Chemkhi, Clémence Demangel,
    Effect of surface nanocrystallization on the corrosion behavior of Ti-6Al-4V titanium alloy.
    Surface and Coatings Technology 224, 82–87.
    Elsevier, 2013.
  22. Benoît Panicaud, Mahdi Chemkhi, Arjen Roos, Delphine Retraint,
    Theoretical modelling of iron nitriding coupled with a nanocrystallisation treatment. Application to numerical predictions for ferritic stainless steels.
    Applied Surface Science 258(17), 6611–6620.
    Elsevier, 2012.
  23. Yuanyuan Pi, Gueda Agoda, Stéphane Potiron, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Surface nanocrystallization of Ti-6Al-4V alloy: microstructural and mechanical characterization.
    Journal of Nanoscience and Nanotechnology 12(6), 4892–4897.
    Elsevier, 2012.
  24. Johann Petit, Laurent Waltz, Guillaume Montay, Delphine Retraint, Arjen Roos, Manuel François,
    Multilayer modelling of stainless steel with a nanocrystallised superficial layer.
    Materials Science and Engineering: A 536, 124–128.
    Elsevier, 2012.
  25. Delphine Retraint, Zakaria Quadir, Wu Xu, Laurent Waltz, Michael Ferry,
    Microstructural investigation of co-rolled nanocrystalline stainless steel sheets.
    Materials Science Forum 702-703, 127–130.
    2012.
  26. Christophe Cellard, Delphine Retraint, Manuel François, Emmanuelle Rouhaud, Didier Le Saunier,
    Laser shock peening of Ti-17 titanium alloy: influence of process parameters.
    Materials Science & Engineering A 532, 362–372.
    Elsevier, 2012.
  27. Benoît Panicaud, Delphine Retraint, Jean-Luc Grosseau-Poussard, Li Li, Mathieu Guérain, Philippe Goudeau, Nobumichi Tamura, Martin Kunz,
    Experimental and numerical study of the effects of a nanocrystallisation treatment on high-temperature oxidation of a zirconium alloy.
    Corrosion Science 60, 224–230.
    Elsevier, 2012.
  28. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Simulation and experimental approach for shot velocity evaluation in ultrasonic shot peening.
    Mécanique et Industries 12, 223–229.
    EDP Sciences, Les Ulis, FRANCE, 2011.
  29. Delphine Retraint,
    Effet d'une couche superficielle nanostructurée sur les propriétés mécaniques de pièces métalliques.
    Matériaux et Techniques 99(1), 101–104.
    2011.
  30. Laurent Waltz, Delphine Retraint, Arjen Roos, Claude Garnier, Patrick Olier,
    Effect of interfacial oxidation occurring during the duplex process combining surface nanocrystallisation and co-rolling.
    Surface & coatings technology 205, 4608–4613.
    2011.
  31. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    High Strength Nanocrystallized Multilayered Structure Obtained By SMAT And Co-rolling.
    Materials science forum 614, 249–254.
    2009.
  32. Juha Uusitalo, Pentti Karjalainen, Delphine Retraint, Mikko Palosaari,
    Fatigue properties of steels with ultrasonic attrition treated surface layers.
    Materials science forum 604-605, 239–248.
    scientific.net, 2009.
  33. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Combination of surface nanocrystallization and co-rolling: Creating multilayer nanocrystalline composites.
    Scripta materialia 60(1), 21–24.
    2009.
  34. Matthieu Micoulaut, Sergei Mechkov, Delphine Retraint, Pascal Viot, Manuel François,
    Granular gases in mechanical engineering : on the origin of heterogeneous ultrasonic shot-peening.
    Granular Matter 9(1-2), 25–33.
    2007.
  35. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Enhanced mechanical behaviour of a nanostructured stainless steel and its thermal stability.
    Materials science and engineering 524-525, 281–288.
    2007.
  36. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment.
    Scripta materialia 54, 1949–1954.
    2006.
  37. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Effect of surface nanocrystallization on tribological properties of stainless steel.
    Materials science forum 524-525, 717–722.
    2006.
  38. Céline Pile, Manuel François, Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Modelling of ultrasonic shot-peening process.
    Materials science forum 490, 67–72.
    2005.
  39. Matthieu Micoulaut, Serguei Mechkov, Delphine Retraint, Pascal Viot, Manuel François,
    Granular gases in mechanical engineering : on the origin of heterogeneous ultrasonic shot-peening.
    ArXiv : condensed matter 9(1-2), 0–6.
    2005.
  40. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Generation of nanostructures on 316L stainless steel and its effect on mechanical behavior.
    Materials science forum 490, 625–630.
    2005.
  41. Céline Pilé, Delphine Retraint, Manuel François, Jian Lu,
    Effect of very high stress levels on the fatigue life of a TiAl based alloy.
    Materials science forum 490, 418–423.
    2005.
  42. Thierry Roland, Min Ya, Delphine Retraint, Ke Lu, Jian Lu,
    A new multilayered nanostructured composite material produced by assembling SMA-treated thin plates.
    Journal of materials science and technology 20, 55–58.
    2004.
  43. Delphine Retraint, Claude Garnier, Bruno Guelorget, Jian Lu,
    Improvement of the fatigue behaviour of an automotive part using a new mechanical treatment.
    Materials science forum 404(7), 463–468.
    2002.
  44. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Generation of extremely hight stress levels in a TiAl based alloy.
    Materials science forum 404, 89–94.
    2002.
  45. Delphine Retraint, Jian Lu,
    Study of residual stress distribution by the combination of three techniques in an aluminium based MMC.
    Materials science forum 347(3), 498–503.
    2000.
  46. Shabnam Rasouli Yazdi, Delphine Retraint, Jian Lu,
    Experimental Study of Residual Stress Distribution in Quenched Parts by the Incremental Large Hole Drilling Method and by the Neutron Diffraction Method.
    Journal of testing and evaluation 28(4), 282–289.
    2000.
  47. Shabnam Rasouli Yazdi, Delphine Retraint, Jian Lu,
    Study of through thickness residual stress by numerical end experimental techniques.
    Journal of strain analysis for engineering design 33(6), 449–458.
    1998.
  48. Jian Lu, Delphine Retraint,
    A review of recent developments and applications in the field of X-ray diffraction for residual stress study.
    Journal of strain analysis for engineering design 33(2), 127–136.
    1998.

Journal articles with no peer-review

  1. Emmanuelle Rouhaud, Delphine Retraint,
    Procédés de grenaillage pour pièces forgées.
    La Forge, 16_26.
    2015.

Invited conference talks

  1. Delphine Retraint,
    Effet d’une couche superficielle nanostructurée sur les propriétés mécaniques et de surface de pièces métalliques.
    Journée sur les "Traitements de surface - Innovations et Procédés" organisée par la maison Innovergne, Clermont Ferrand, 24 mai.
    2016.
  2. Delphine Retraint,
    SMAT: from superficial nanostructure generation to enhanced surface properties.
    The 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD 6).
    2014.
  3. Clémence Demangel, Delphine Retraint,
    Le traitement SMAT, Surface Mechanical Attrition Treatment, au service des biomatériaux.
    4ème SEMINAIRE traitements thermiques & revêtements innovants des matériaux métalliques avancés au service de la performance.
    2014.
  4. Manuel François, Delphine Retraint, Emmanuelle Rouhaud,
    Mesure des contraintes résiduelles par méthodes optiques.
    Les contraintes résiduelles dans les pièces en titane : génération, mesure, effet sur la fatigue Séminaire, ISAE, Toulouse, 29 janvier.
    2013.
  5. Delphine Retraint, Clémence Demangel,
    Nanocristallisation de surface de biomatériaux : une voie pour améliorer leurs propriétés mécaniques et leur résistance à l'usure.
    Journée sur les implants orthopédiques, Strasbourg, France, 29 mars.
    2012.
  6. Delphine Retraint, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Claude Garnier, Clémence Demangel,
    Combined surface treatment: surface nanocrystallisation and nitriding.
    European Conference on Combined treatments to improve surface properties, March 22-23, 2012, Strasbourg, France.
    2012.
  7. Delphine Retraint, Clémence Demangel, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Sami Jelliti, Caroline Richard,
    Biomatériaux : les apports d’un traitement de surface de nanocristallisation.
    Forum Innovation MEDTECH France, Eurexpo Lyon, France, 4-5 avril.
    2012.
  8. Delphine Retraint,
    Amélioration des propriétés mécaniques et de surface par nanocristallisation superficielle (projet NANOSURF).
    7e Assises Recherche & Entreprises - Atelier « Propriétés fonctionnelles des métaux : application du traitement de surface dans le biomédical et l’industrie des transports et de la logistique », Centre des congrès de Reims, 27 mars.
    2012.
  9. Delphine Retraint,
    Surface Mechanical Attrition Treatment (SMAT): from nanostructure formation to enhanced mechanical and wear properties.
    Invited seminar, University of New South Wales, Sydney, February 24.
    2011.
  10. Delphine Retraint, Claude Garnier, Delphine Auzene,
    Nanostructuration des alliages de titane par SMAT (Surface Mechanical Attrition Treatment).
    Journée sur « Les traitements innovants sur les alliages de titane : vers de nouvelles fonctionnalités »,, Saint-Etienne, Octobre 2008.
    2008.
  11. Emmanuelle Rouhaud, Delphine Retraint, Guillaume Montay, L. Roucoules, Manuel François,
    Shot peening processes: Form elaboration to XAO.
    Mechanical Surface treatment, Second French German meeting, Karlsruhe Allemagne, 15 novembre 2006.
    2006.

Proceedings articles indexed in international databases

  1. Souhail Benafia, Delphine Retraint, Benoït Panicaud, Jean-Luc Grosseau Poussard,
    Influence of surface mechanical attrition treatment on the oxidation behavior of 316L stainless steel at 750°C.
    IOP Conference Series: Materials Science and Engineering 63(1), 1–7.
    Institute of Physics Publishing, 2014.
  2. Zhidan Sun, Mahdi Chemkhi, Pascale Kanoute, Delphine Retraint,
    Fatigue properties of a biomedical 316L steel processed by surface mechanical attrition.
    IOP Conference Series: Materials Science and Engineering 63(1), 1–10.
    Institute of Physics Publishing, 2014.
  3. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Gwénaëlle Proust, Laurent Waltz,
    Microstructural evolution of a 316L alloy subjected to surface nanocrystallisation and low-temperature plasma nitriding.
    The 15th International Conference on Advances in Materials & Processing Technologies (AMPT 2012), Wollongong, NSW Australia., September 2012, 6.
    2012.
  4. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Guillaume Montay, Laurent Waltz,
    Evolution of the residual stress state after surface mechanical attrition treatment and low temperature plasma nitriding.
    The 9th International Conference on Residual Stresses (ICRS9), Garmisch-Partenkirchen,Germany, October 2012, 1.
    2012.
  5. Delphine Retraint, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Claude Garnier, Clémence Demangel,
    Combined surface treatment: surface nanocrystallisation and nitriding.
    European Conference on Combined treatments to improve surface properties, Strasbourg, March 2012, 1.
    2012.
  6. Delphine Retraint, Zakaria Quadir, W Xu, Laurent Waltz, Michael Ferry,
    Microstructural investigation of roll bonded nanocrystalline stainless steel sheets.
    The 16th International Conference on the Textures of Materials (ICOTOM 16), Bombay (India), December 2011, 6.
    2011.
  7. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Laurent Waltz, Clémence Demangel,
    Influence of surface mechanical attrition treatment on low temperature plasma nitriding of medical grade austenitic stainless steel.
    European Congress and Exhibition on Advanced Materials and Processes, Montpellier, France, September 2011, 1.
    2011.
  8. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Impact velocity and distribution in ultrasonic shot peening.
    International Conference on Shot Peening - ICSP11, South Bend - USA, September 2011, 6.
    2011.
  9. Sami Jelliti, Caroline Richard, Delphine Retraint,
    Electrochemical Studies on the Stability and Corrosion Resistance of Ti-6Al-4V Alloy for Biomedical Applications.
    The 12th World Conference on Titanium (Ti-2011), Beijing (China), June 2011, 4.
    2011.
  10. Mahdi Chemkhi, Yuanyuan Pi, Delphine Retraint, Guillaume Montay, Clémence Demangel, Claude Garnier, Farid Belhacene, Hicham Benhayoune,
    Effect of SMAT parameters on microstructural features using DOE technique.
    11th International Congress on Shot Penning, South Bend, Indiana, USA, September 2011, 6.
    2011.
  11. Sami Jelliti, Caroline Richard, Delphine Retraint, J Landoulsi, Clemence Demangel,
    Comportement en tribocorrosion de l'alliage Ti6Al4V dans une solution de Ringer.
    Journées Internationales Francophones de tribologie (JIFT¿11), Strasbourg, Mai 2011, 4.
    2011.
  12. Yuanyuan Pi, Delphine Retraint, Clemence Demangel, Gueda Agoda, Hicham Benhayoune,
    Surface nanocrystallization of Ti-6Al-4V alloy: microstructural and mechanical characterization.
    5th International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT-5), Reims, Octobre 2010, 6.
    2010.
  13. Mahdi Chemkhi, Yuanyuan Pi, Delphine Retraint, Clemence Demangel, Hicham Benhayoune,
    Influence of a nanocrystalline surface layer on fatigue strength of Ti-6Al-4V.
    10th International Fatigue Congress (FATIGUE 2010), Prague, Juin 2010, 6.
    2010.
  14. Delphine Retraint, Juha Uusitalo, Pentti Karjalainen, Mikko Palosaari,
    Effect of the Surface Mechanical Attrition Treatment on the fatigue properties of two austenitic stainless steels.
    10th International Fatigue Congress (FATIGUE 2010), Prague, Juin 2010, 2.
    2010.
  15. Sami Jelliti, Caroline Richard, Delphine Retraint,
    Approche Tribocorrosion des biomatériaux nanostructurés pour applications biomédicales.
    Journées Internationales Francophones de tribologie (JIFT¿10), Albi, Mai 2010, 4.
    2010.
  16. S Jelliti, Caroline Richard, M Bigerelle, Delphine Retraint, Hicham Benhayoune,
    Tribocorrosion d'alliages métalliques (acier inoxydable AISI 316L et TiAl6V) nanostructurés par procédé duplex (SMAT, Nitruration) - Projet « NANOSURF ».
    Journées Internationales Francophones de tribologie (JIFT'09),, Compiègne, Mai 2009, 2.
    2009.
  17. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Experimental investigation on a nanocrystallized multilayered structure obtained with a duplex treatment: SMAT and co-rolling.
    7th EUROMECH Solid Mechanics, Lisbonne, Septembre 2009, 6.
    2009.
  18. Christophe Cellard, Delphine Retraint, Emmanuelle Rouhaud, Manuel François, Ana Viguera-Sancho,
    Laser Shock Peening of a Titanium Alloy: Influence of Process Parameters.
    ICSP 10 (International Conference on Shot Peening), Tokyo, September 2008, 6.
    2008.
  19. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    HIGH STRENGTH NANOCRYSTALLIZED MULTILAYERED STRUCTURE OBTAINED BY SMAT AND CO-ROLLING.
    The 6th International Forum on Advanced Material Science and Technology (IFAMST , HONG KONG, June 2008.
    2008.
  20. Juha Uusitalo, Pentti Karjalainen, Delphine Retraint, Mikko Palosaari,
    Fatigue properties of steels with ultrasonic attrition treated surface layers.
    International Conference Recent Developments in the Processing and Applications of Structural Metals and Alloys, COMO, Italy, June 2008, 239–248.
    2008.
  21. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    COMBINATION OF THE SMA-TREATMENT AND THE CO-ROLLING PROCESS FOR THE PRODUCTION OF A NANOSTRUCTURED COMPOSITE STRUCTURE.
    The Tenth International Conference of Shot Peening (ICSP 10), TOKYO, September 2008, 6.
    2008.
  22. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Surface property modifications of steel induced by SMAT.
    The 21st International Conference on Surface Modification Technologies (SMT21), Paris, Septembre 2007, 6.
    2007.
  23. Christophe Cellard, Pierre Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, Ana Viguera-Sancho,
    Residual Stress and Deformation Induced by Laser Shock Peening on Titanium Alloys.
    ICEM13 (International Conference on Experimental Mechanics), Alexandroupolis, July 2007, 9.
    2007.
  24. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    21st International Conference on Surface Modification Technologies (SMT21), PARIS, September 2007, 9.
    2007.
  25. Christophe Cellard, Pierre Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, Ana Viguera-Sancho,
    Laser Shock Peening on Titanium Alloys : Residual Stress and Deformations.
    SMT21 (21st International Conference on Surface Modification Technologies), Paris, September 2007, 6.
    2007.
  26. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    GLOBAL BEHAVIOR OF A NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    International Conference on Experimental Mechanics 13 (ICEM13), ALEXANDROUPOLIS, July 2007, 10.
    2007.
  27. Jian Lu, Pascal Lafon, Delphine Retraint, Emmanuelle Rouhaud,
    Integration of the Residual Stress in the Engineering Design of Mechanical Components and Structure using the Prestress Engineering Approach.
    16th CIRP Design Seminar, Alberta, July 2006, 10.
    2006.
  28. Florent Cochennec, Emmanuelle Rouhaud, Delphine Retraint, Sébastien Rouquette, Arjen Roos,
    Analysis of the impact of a shot at low velocity using the finite element method. Application to the ultrasonic shot peening process.
    Materials science forum 524-525, 337–342.
    2006.
  29. Claude Garnier, Jian Lu, Alain Milley, Guillaume Montay, Delphine Retraint,
    Presentation of a general approach for taking into account the residual stress in the design of automotive components.
    SAE Congress, Detroit, April 2005, 539–546.
    2005.
  30. Matthieu Micoulaut, Delphine Retraint, Pascal Viot, Manuel François,
    Heterogeneous ultrasonic shot-peening : experiments and simulations.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 119–124.
    2005.
  31. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Fatigue life improvement through nanostructuring of stainless steel.
    9th International Conference on Shot-Peening (ICSP9), Marne-La-Vallée, August 2005, 6.
    2005.
  32. Katsuji Tosha, Jian Lu, Delphine Retraint, Bruno Guelorget, Kisuke Iida,
    Influence of pre-annealing on surface and surface layer characteristics produced by shot peening.
    The 8th International Conference on Shot Peening (ICSP-8), Garmisch-Partenkirch, September 2002, 173–180.
    2002.

Unindexed proceedings articles

  1. Clémence Demangel, Daniella Tchana, Delphine Retraint, Hicham Benhayoune,
    Use of Surface Mechanical Attrition Treatment for implantable material wear enhancement.
    3rd International Conference on BioTribology (ICoBT 2016), Imperial College London (UK), 11-14 September.
    2016.
  2. Gwénaëlle Proust, Delphine Retraint, Anne-Gaëlle Raoult, Clémence Demangel, Daniella Tchana, Hicham Benhayoune,
    Microstructural characterization of a cobalt-chromium-molybdenum alloy subjected to surface mechanical attrition treatment.
    International Conference on Plasticity, Damage and Fracture (Plasticity 2016).
    2016.
  3. Souhail Ben Afia, Delphine Retraint, Benoît Panicaud, Jean-Luc Grosseau Poussard,
    Comparison of growth stresses developed in a thermally growing oxide on a nanocrystallised stainless steel, evaluated by in-situ Raman spectroscopy and numerical simulations.
    The 30th International Conference on Surface Modification Technologies (SMT30), Milan (Italy), 29 June - 1st July.
    2016.
  4. Szymon Bajda, Dmytra Svyetlichnyy, Delphine Retraint, Janusz Majta, Michal Krzyzanowski,
    3D analysis of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique.
    XXV International Materials Research Congress (IMRC 2016), Cancun (México), 14-19 August.
    2016.
  5. Zhidan Sun, Delphine Retraint, Yangcan Wu, Bruno Guelorget, Laurent Waltz,
    Characterization of mechanical behavior of nanocrystalline layer induced by SMAT using micro-pillar compression technique coupled with finite element analysis.
    Nanomechanical Testing in Material Research and Development V, Albufeira, Portugal, October 4-9.
    2015.
  6. Joël Faure, Richard Drevet, Nader Ben Jaber, Sylvain Potiron, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Electrophoretic Deposition of Hydroxyapatite and Bioactive Glasses coatings on the Ti6Al4V alloy subjected to Surface Mechanical Attrition Treatment.
    The International Conference on Electrophoretic Deposition V: Fundamentals and Applications (EPD 2014).
    2014.
  7. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between residual stress induced by conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on a Titanium alloy.
    9th European Conference on Residual Stresses (ECRS9), Troyes.
    2014.
  8. Souhail Ben Afia, Delphine Retraint, Benoît Panicaud, Emmanuelle Rouhaud, Arjen Roos, Léa Le Joncour, Matthieu Micoulaut,
    Modélisation par transition d’échelles de la nanocristallisation d’un acier 316L par le procédé SMAT.
    11e Colloque National en Calcul des Structures (CSMA 2013).
    2013.
  9. Gwénaëlle Proust, Mélanie Gilles, Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Laurent Waltz,
    Microstructural Evolution of Stainless Steel after Surface Mechanical Attrition Treatment and Nitriding.
    The 5th International Conference on Recrystallization and Grain Growth (ReX GG 2013), Sydney (Australia).
    2013.
  10. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Laurent Waltz,
    Influence of a Nanocrystalline surface layer combined with low temperature plasma Nitriding on Microstructure and Tribological Properties of a stainless steel.
    International conference on Materials Innovations in Surface Engineering (MISE 2013), Adelaide (Australia).
    2013.
  11. Frédéric Velard, Christine Guillaume, Florence Draux, Sylvie Bouthors, Clémence Demangel, Yuanyuan Pi, Arnaud Lemelle, Hicham Benhayoune, Delphine Retraint, Dominique Laurent-Maquin,
    In Vitro Evidence that SMAT is a Promising Treatment for the Increasing Lifespan of Orthopaedic Devices.
    The European Society for Biomaterials (ESB2013), Madrid (Spain).
    2013.
  12. Frédéric Velard, Christine Guillaume, Florence Draux, Sylvie Bouthors, Clémence Demangel, Yuanyuan Pi, Arnaud Lemelle, Hicham Benhayoune, Delphine Retraint, Dominique Laurent-Maquin,
    Human Primary Osteoblasts Response to Surface Mechanical Attrition Treatment of Titanium Alloy: A Step Closer toward Expanded Lifespan Implants.
    The Third International Conference on Multifunctional, Hybrid and Nanomaterials, Sorrento (Italy).
    2013.
  13. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Guillaume Montay, Clémence Demangel,
    Duplex surface treatments combining surface mechanical attrition treatment (SMAT) and low temperature plasma nitriding.
    The 12th International Workshop on Plasma-Based Ion Implantation and Deposition, Poitiers (France), July 4.
    2013.
  14. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on the induced superficial mechanical properties of a Titanium alloy.
    International conference on Materials Innovations in Surface Engineering (MISE 2013) , Adelaide (Australia).
    2013.
  15. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Grenaillage ultrason : expériences et simulations.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  16. Mahdi Chemkhi, Delphine Retraint, Guillaume Montay, Claude Garnier, Farid Belhacene,
    Les plans d'expériences appliqués à l'optimisation des paramètres de nanocristallisation par SMAT (Surface Mechanical Attrition Treatment).
    MATERIAUX 2010 , Nantes, France, Octobre 2010, 11.
    2010.
  17. Mahdi Chemkhi, Nader Ben Jaber, Delphine Retraint, Farid Belahcene,
    Caractérisation ultrasonore de couches nanostructurées par SMAT (Surface Mechanical Attrition Treatment).
    Journées de la Matière Condensée (JMC12), Troyes, Août 2010, 1.
    2010.
  18. Delphine Retraint,
    Effet d'une couche superficielle nanostructurée sur les propriétés mécaniques de pièces métalliques.
    4ème colloque 3M « Matériaux, Mécanique, Microstructures », Saclay, Juin 2009.
    2009.
  19. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Analyse mécanique et microstructurale d'un matériau multicouches élaboré par co-laminage de tôles nanostructurées par SMAT.
    19ème Congrès Français de Mécanique (CFM19), Marseille, Août 2009, 6.
    2009.
  20. Delphine Retraint,
    Le procédé SMAT : de la nanostructuration à l'amélioration des propriétés des surfaces et des propriétés mécaniques des matériaux métalliques.
    journée sur «Les Contraintes Résiduelles» organisée par l'Association de Traitement Thermique et de Traitement de Surface (A3TS), Paris, Février 2008, 9.
    2008.
  21. C. Cellard, P. Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, A. Viguera-Sancho,
    Laser shock peening on titanium alloys: residual stress and deformations. Proceedings of the 21st International Conference on Surface Modification Technologies.
    Proceedings of the 21st International Conference on Surface Modification Technologies, 24-26 September 2007, Paris..
    2007.
  22. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    Comportement mécanique d'une structure multicouche obtenue par co-laminage de tôles nanostructurées par SMAT.
    18ème Congrès Français de Mécanique (CFM2007) , GRENOBLE, Août 2007, 6.
    2007.
  23. Cellard C., P. Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, A. Viguera-Sancho,
    Application of laser shock peening to titanium alloys: determination of the residual stress profile and deformation.
    Proceedings of the 21st International Conference on Surface Modification Technologies (SMT), Paris France, 24-26 septembre 2006.
    2006.
  24. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Propriétés mécaniques d'un acier inoxydable nanostructuré.
    17ème congrès français de mécanique (CFM), Troyes, Septembre 2005, 6.
    2005.
  25. Matthieu Micoulaut, Delphine Retraint, Pascal Viot, Manuel François,
    Grenaillage ultrasonore hétérogène.
    17ème congrès français de mécanique, Troyes, Août 2005, 119–124.
    2005.
  26. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Détermination par la méthode du trou incrémental des contraintes résiduelles dans un alliage TiAl grenaillé par ultrasons.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux, Troyes (France), MARS 2002, 6.
    2002.
  27. Delphine Retraint, Jian Lu,
    Evaluation of residual stresses in an ultrasonic shot-peened aluminium composite.
    SEM'98, HOUSTON (Texas), JUNE 1998, 1.
    1998.

Conference talks with no proceedings

  1. Jianqiang Zhou, Zhidan Sun, Pascale Kanouté, Delphine Retraint,
    Self-consistent modeling of the mechanical behavior of an austenitic stainless steel under low cycle fatigue loading.
    ICMM5 – 5th International Conference on Material Modelling, Rome, Italy, 13-16 June 2017.
    2017.
  2. Rida A., Emmanuelle Rouhaud, Matthieu Micoulaut, Ali Makke, Delphine Retraint,
    Molecular dynamics investigations for surface mechanical attrition treatment.
    ICSP13, Montréal, Canada.
    2017.
  3. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Modelling of the work hardening influence on the relaxation of residual stresses for shot peened Inconel 718 turbine disk.
    ICSP13.
    2017.
  4. Yangcan Wu, Madani Yossi, Zhidan Sun, Delphine Retraint, Benoît Panicaud,
    Modélisation et simulation numérique par éléments finis de la déformation de matériaux métalliques nanocristallins.
    13ème Colloque National en Calcul des Structures (CSMA2017), Giens, 15-19 mai, 2017.
    2017.
  5. Vincent Boyer, Jean-Patrick Goulmy, Maxime Gelineau, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté, Serge Kruch, Laurent Barrallier, Régis Kubler,
    Investigation of relevant experimental parameters for the description of work-hardening in shot peened materials.
    ICSP13, Montréal, Canada.
    2017.
  6. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud, Patrice Peyre, Cyril Gorny, Gwénaëlle Proust,
    Experimental analysis of stainless steel 316L treatment by conventional shot peening, ultrasonic shot peening and laser peening processes.
    ICSP13, Montréal, Canada.
    2017.
  7. Gwénaëlle Proust, Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud, Patrice Peyre,
    Comparison of the Effects of Shot Peening, Surface Mechanical Attrition Treatment and Laser Shock Peening on a 316L Stainless Steel.
    7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7), Sydney (Australia), 2-7 July.
    2017.
  8. Camille Bour, Christine Guillaume, Clémence Demangel, Bruno Cauwe, Joël Faure, Hicham Benhayoune, Dominique Laurent-Maquin, Delphine Retraint, Frédéric Velard,
    Can SMAT on UHMWPE be a Process to Limit Aseptic Loosening of Orthopaedic Implants?.
    The 28th European Conference on Biomaterials (ESB2017), Athen (Greece), September 4-8.
    2017.
  9. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Assessment of shot-peening on fatigue life of Inconel 718 turbine disk.
    ICSP13.
    2017.
  10. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Analyses expérimentale et numérique des contraintes résiduelles et de l’écrouissage générés au cours du grenaillage de l’inconel 718 Direct Aged.
    Colloque Mecamat, Aussois, France.
    2017.
  11. Vincent Boyer, Jean-Patrick Goulmy, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    A constitutive model for simulation of shot-peening and fatigue.
    ICSP13, Montréal, Canada.
    2017.
  12. Daniella Tchana, Delphine Retraint, Hicham Benhayoune, Clémence Demangel, Gwénaëlle Proust,
    Residual stress evaluation using hole-drilling method on a Co-Cr-Mo alloy after a nanocrystallisation surface treatment.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  13. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Relaxation thermique des contraintes résiduelles dans l’Inconel 718 : grenaillage et aspects microstructuraux.
    A3TS, Nancy, France.
    2016.
  14. Szymon Bajda, Dmytra Svyetlichnyy, Delphine Retraint, Michal Krzyzanowski,
    Modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials.
    Applied Nanotechnology and Nanoscience International Conference (ANNIC16).
    2016.
  15. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, ,
    Modèle analytique pour le calcul des contraintes résiduelles après grenaillage classique ou ultrasonore.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov..
    2016.
  16. Jianqiang Zhou, Zhidan Sun, Pascale Kanouté, Delphine Retraint,
    Low cycle fatigue properties of an austenitic stainless steel 316L processed by surface mechanical attrition treatment.
    15th European Mechanics of Materials Conference (EMMC15), Brussels, Belgium, 2016.
    2016.
  17. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, S. Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Influence of initial microstructure of IN718 on the residual stresses and the work hardening induced by shot peening.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  18. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud, ,
    Influence du grenaillage sur de vie de disque de turbine en Inconel 718.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov..
    2016.
  19. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Caractérisation par DRX des contraintes résiduelles et de l'écrouissage générés au cours du grenaillage de l'Inconel 718 Direct Aged.
    GFAC, Toulouse, France.
    2016.
  20. Vincent Boyer, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, ,
    Caractérisation par DRX des contraintes résiduelles et de l'écrouissage générés au cours du grenaillage de l'Inconel 718 Direct Aged.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov.
    2016.
  21. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Assessment of shot-peening on fatigue life of Inconel 718 turbine disk.
    International Conference on Fatigue Damage of Structural Materials XI, Hyannis Resort and Conference Center, Hyannis, MA (USA), 18-23 September.
    2016.
  22. Vincent Boyer, Jean-Patrick Goulmy, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté,
    A constitutive model for simulation of shot-peening and fatigue.
    2nd International Conference on COmputational methods in Manufacturing Processes (ICOMP16) Liège (Belgium), 18-20 May.
    2016.
  23. Ali Makke, Benoît Panicaud, Zhidan Sun, Lea Le Joncour, Delphine Retraint, Emmanuelle Rouhaud,
    Plastic deformation and damage initiation in nanocrystalline metals.
    International Colloquium of Mechanics - Multi-physics modeling of solids, Paris, October 6-8.
    2014.
  24. Emmanuelle Rouhaud, F. Dussoulier, Matthieu Micoulaut, Jawad Badreddine, Sebastien Remy, Delphine Retraint, Donato Galitelli, Guillaume Montay, Manuel François, Vincent Desfontaine, Pierre Renaud,
    Model of shot dynamics for shotpeening of parts with complex geometries.
    First International Conference on Computational methods in Manufacturing (ICOMP14) Saint-Etienne, France.
    2014.
  25. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, Jawad Badreddine, Carl Labergère, Manuel Francois,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  26. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Léa Le Joncour, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Modelling of grain refinement induced by SMAT process, using a complete numerical chaining methodology.
    Proceedings of the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNSMP), Oulu Finland.
    2013.
  27. Delphine Retraint, Clémence Demangel,
    Nanocristallisation de surface de biomatériaux : une voie pour améliorer leurs propriétés mécaniques et leur résistance à l'usure.
    Journée sur les implants orthopédiques, Strasbourg, Mars 2012.
    2012.
  28. Gwénaëlle Proust, Mélanie Gillles, Laure Aschehoug, Pat Trimby, Mahdi Chemkhi, Delphine Retraint, Arjen Roos,
    Microstructural evolution of stainless steel after surface treatments.
    Workshop Nanospec on EBSD, Sydney, November 2012.
    2012.
  29. Delphine Retraint, Clemence Demangel, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Sami Jelliti, Caroline Richard,
    Biomatériaux : les apports d'un traitement de surface de nanocristallisation.
    Forum Innovation MEDTECH (conférence invitée), Lyon, Avril 2012.
    2012.
  30. Laurent Waltz, Pascale Kanouté, Delphine Retraint,
    Mechanical characterization of a SMATed 316L stainless steel: use of cyclic nanoindentation.
    European Congress on Advanced Materials and Processes (Euromat 2011), Montpellier, September 2011.
    2011.
  31. Wiem Toumi Ajimi, Farid Belahcene, Jazzar Hoblos, Delphine Retraint, Guillaume Montay,
    In situ ultrasonic non destructive evaluation of applied stress in prestressed bars.
    European congress and exhibition on advanced materials and processes, Montpellier, Septembre 2011.
    2011.
  32. Benoit Panicaud, Delphine Retraint, Jean-Luc Grosseau-Poussard, M Guérain,
    Experimental study on the mechanical effects of a nano-crystallization treatment during high temperature oxidation of ZrO2 oxide films growing on Zr alloy.
    European Congress on Advanced Materials and Processes (Euromat 2011), Montpellier, September 2011.
    2011.
  33. Wiem Toumi Ajimi, Farid Belahcene, Jazzar Hoblos, Delphine Retraint, Guillaume Montay,
    Evaluation non destructive, par ultrasons, de l'effort présent dans des barres de précontrainte en service.
    20ème Congrès Français de Mécanique, Besançon, Août 2011.
    2011.
  34. Jawad Badreddine, Emmanuelle Rouhaud, Delphine Retraint, Matthieu Micoulaut, Manuel François,
    Modeling of ultrasonic shot peening: dynamic of shot during the peening process.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  35. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Modeling of ultrasonic shot peening : Dynamic of shot during the peening process.
    ECRS-8, Riva del Garda , June 2010.
    2010.
  36. Mahdi Chemkhi, Delphine Retraint, Guillaume Montay, Farid Belahcene,
    Les plans d'expériences appliqués à l'optimisation des paramètres de nanocristallisation par SMAT.
    JMC12, Troyes, France, Août 2010.
    2010.
  37. Delphine Retraint, Claude Garnier, Delphine Auzene,
    Effet d¿une couche nanocristalline superficielle sur les propriétés tribologiques de matériaux métalliques.
    Journée Nationale sur « Les conditionnements mécaniques et chimiques des surfaces appliqués aux pièces mécaniques », Le Mans, Octobre 2009.
    2009.
  38. Delphine Retraint, Claude Garnier, Bruno Guelorget, Jian Lu,
    Study of the influence of ultrasonic shot peening on the fatigue behaviour of a 41CR4 steel.
    Integrity Reliability Failure, Porto, June 1999, 112.
    1999.
  39. P Bonhomme, G Balossier, Delphine Retraint, J Michel,
    Potentialités de la microscopie électronique analytique à transmission pour l'étude de l'interface os/implant.
    Colloque sur les Biomatériaux, Reims, OCTOBRE 1996.
    1996.

Conference posters

  1. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Analyse expérimentale et numériques des contraintes résiduelles et de l’écrouissage générés au cours du grenaillage de l’Inconel 718 Direct Aged.
    Colloque MECAMAT – Fatigue des Structures et des Matériaux – Aussois, 24-27 janvier.
    2017.
  2. Luciane Yumi Suzuki de Oliveira, C. Eliana, B. Marino, Carlos Siqueira, Delphine Retraint, N. Kazue Kuromoto,
    Ti6Al4V surface modification with SMA treatment: Tribological studies and fragments characterization.
    9th Latin American Congress on Artificial Organs and Biomaterials (COLAOB 2016), Foz do Igaçu (Brazil), 24-27 august.
    2016.
  3. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Surface Mechanical Attrition Treatment effect on gas nitriding treatment of a martensitic steel.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  4. F. Dussoulier, Donato Gallitelli, Emmanuelle Rouhaud, Jawad Badreddine, Delphine Retraint, Matthieu Micoulaut,
    Models for shot dynamics: conventional and ultrasonic shot peening.
    9th European Conference on Residual Stresses (ECRS9), Troyes.
    2014.

Scientific books (or chapters)

  1. Delphine Retraint, Céline Pile, Claude Garnier, Jian Lu,
    ultrasonic shot peening.
    Handbook on residual stress, 146–159.
    SEM, USA, 2005.

Popularization books (or chapters)

  1. Clémence Demangel, Delphine Retraint,
    La nanocristallisation renforce les prothèses articulaires en CoCrMo.
    DeviceMed, 48–49.
    2016.

Books or journal issues directions

  1. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Proceedings of the 9th International Conference on Residual Stresses (ECRS-9).
    Adavanced Materials Research 996.
    Trans Tech Publications, 2014.

Other productions

  1. delphine Retraint,
    Surface Mechanical Attrition Treatment (SMAT): from nanostructure formation to enhanced mechanical and wear properties.
    invited seminar, Civil Engineering School, University of Sydney (Australia), 11 juillet.
    2016.
  2. delphine Retraint,
    How to Enhance Mechanical and Wear Properties of Metals by Creating a Superficial Nanocrystalline Layer.
    invited seminar, Materials & Surface Science Institute, University of Limerick (Ireland), 8 mai.
    2015.
  3. Emmanuelle Rouhaud, Delphine Retraint,
    Shot peening processes, Materials and Mechanics.
    Invited seminar, Laboratory for Multi-Scale Mechanics / Mechanical Engineering, École Polytechnique de Montréal, Montréal, Canada, April 24th.
    2014.
  4. Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Metal Finishing News.
    Metal Finishing News 4, 26–29.
    2003.