Peer-reviewed journal articles indexed in international databases

  1. Guillaume Altmeyer, Benoît Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Viscoelasticity behavior for finite deformations, using a consistent hypoelastic model based on Rivlin materials.
    Continuum Mechanics and Thermodynamics, 1–18.
    2016.
  2. Donato Gallitelli, Vincent Boyer, Maxime Gelineau, Yann Colaitis, Emmanuelle Rouhaud, Delphine Retraint, Régis Kubler, Marc Desvignes, Laurent Barrallier,
    Simulation of shot peening: From process parameters to residual stress fields in a structure.
    Comptes Rendus - Mecanique 344(4-5), 355–374.
    Elsevier, 2016.
  3. Mingchuan Wang, Benoît Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    Incremental constitutive models for elastoplastic materials undergoing finite deformations by using a four-dimensional formalism.
    International Journal of Engineering Science 106, 199–219.
    https://doi.org/10.1016/j.ijengsci.2016.06.006, 2016.
  4. Benoit Panicaud, Emmanuelle Rouhaud,
    Derivation of Cosserat’s medium equations using different multi-dimensional frameworks.
    Acta Mechanica 227(2), 367–385.
    2016.
  5. Benoît Panicaud, Emmanuelle Rouhaud,
    Derivation of Cosserat’s medium equations using different multi-dimensional frameworks.
    Acta Mechanica 227(2), 367–385.
    2016.
  6. Benoît Panicaud, Emmanuelle Rouhaud, Guillaume Altmeyer, Mingchuan Wang, Richard Kerner, Arjen Roos, O. Ameline,
    Consistent hypo-elastic behavior using the four-dimensional formalism of differential geometry.
    Acta Mechanica 227(3), 651–675.
    2016.
  7. Guillaume Altmeyer, Emmanuelle Rouhaud, Benoît Panicaud, Arjen Roos, Richard Kerner, Mingchuan Wang,
    Viscoelastic models with consistent hypoelasticity for fluids undergoing finite deformations.
    Mechanics of Time-Dependent Materials 19(3), 375–395.
    2015.
  8. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Sébastien Remy,
    Simulation of shot dynamics for ultrasonic shot peening: effects of process parameters.
    International Journal of Mechanical Sciences 82, 179–190.
    elsevier, 2014.
  9. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Preface.
    Advanced Materials Research 996.
    2014.
  10. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on a titanium alloy.
    Advanced Materials Research 996, 964–968.
    Trans Tech Publications, 2014.
  11. J. Badreddine, Sebastien Remy, Matthieu Micoulaut, Emmanuelle Rouhaud, V. Desfontaine, P. Renaud,
    CAD based model of ultrasonic shot peening for complex industrial parts.
    Advances in Engineering Software 76, 31–42.
    2014.
  12. Mingchuan Wang, Emmanuelle Rouhaud, Arjen Roos, Benoit Panicaud, Richard kerner, Olivier Ameline,
    Anisotropic elastic behaviour using the four-dimansional formalism of differential geometry.
    Computational Materials Science.
    2014.
  13. Benoit Panicaud, Emmanuelle Rouhaud,
    A frame-indifferent model for a thermo-elastic material beyong the three-dimensional Eulerian and Lagrangean descriptions.
    Continuum Mechanics and Thermodynamics.
    2014.
  14. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Sébastien Remy, Vincent Desfontaine, Pierre Renaud,
    3D model of shot dynamics for ultrasonic shot peening.
    Material Science Forum 768-769, 503–509.
    Trans tech Publications, 2014.
  15. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Léa Le Joncour, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Modelling of grain refinement induced by SMAT process, using a complete numerical chaining methodology.
    Materials Science Forum 762, 295–300.
    Trans Tech Publications, 2013.
  16. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Sébastien Remy, Delphine Retraint, Manuel François,
    Effect of the confinement on the properties of ultrasonic vibrated granular gases.
    Granular Matter 15(3), 367–376.
    Elsevier, 2013.
  17. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    Canonical frame-indifferent transport operators with the four-dimensional formalism of differential geometry.
    Computational Materials Science 77.
    2013.
  18. Christophe Cellard, Delphine Retraint, Manuel François, Emmanuelle Rouhaud, Didier Le Saunier,
    Laser shock peening of Ti-17 titanium alloy: influence of process parameters.
    Materials Science & Engineering A 532, 362–372.
    Elsevier, 2012.
  19. J. Badreddine, S. Remy, M. Micoulaut, Emmanuelle Rouhaud, V. Desfontaine, F. Chateau, G. Doubre-Baboeuf, P. Renaud,
    Cad based simulation of ultrasonic shot peening process.
    Proceedings of International Design Conference, DESIGN DS 70, 373–380.
    2012.
  20. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Simulation and experimental approach for shot velocity evaluation in ultrasonic shot peening.
    Mécanique et Industries 12, 223–229.
    EDP Sciences, Les Ulis, FRANCE, 2011.
  21. J. Elgueder, L. Roucoules, Emmanuelle Rouhaud, F. Cochennec,
    Integration of residual stresses in the design of mechanical parts.
    Materials Science Forum 681, 255–260.
    2011.
  22. Guillaume Montay, Olivier Sicot, Afaf Maras, Emmanuelle Rouhaud, Manuel François,
    Two dimensions residual stresses analysis through incremental groove machining combined with electronic speckle pattern interferometry.
    Experimental Mechanics 49(4), 459–469.
    2009.
  23. Sébastien Rouquette, Emmanuelle Rouhaud, Manuel François, Arjen Roos, Jean-Louis Chaboche,
    Coupled thermo-mechanical simulations of shot impacts: Effects of the temperature on the residual stress field due to shot peening.
    Journal of materials processing technology 209(8), 3879–3886.
    2009.
  24. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by Speckle Interferometry.
    Materials Science Forum 524-525, 465–470.
    2006.
  25. Céline Pile, Manuel François, Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Modelling of ultrasonic shot-peening process.
    Materials science forum 490, 67–72.
    2005.
  26. Emmanuelle Rouhaud, D. Deslaef,
    Influence of shots' material on shot peening, a finite element model.
    Materials Science Forum 404-407, 153–158.
    2002.
  27. D. Deslaef, Emmanuelle Rouhaud, S. Rasouli-Yazdi,
    3D finite element models of shot peening processes.
    Materials Science Forum 347, 241–246.
    2000.

Unindexed peer-reviewed journal articles

  1. Altmeyer G., Benoit Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Viscoelasticity behavior for finite deformations, using a consistent hypoelatic model based on Rivlin materials.
    Continuum Mechanics and Thermodynamics 28, 1741–1758.
    2016.
  2. Jawhar Elgueder, Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Product-process interface for manufacturing data management as a support for DFM and virtual manufacturing.
    International Journal on Interactive Design and Manufacturing 4(4), 251–258.
    2010.
  3. Sébastien Rouquette, Emmanuelle Rouhaud, Arjen Roos, Hervé Pron, Manuel François, Christian Bissieux,
    Thermomecanical modeling of a steel plate impacted by a shot and experimental validation.
    Materials science forum 524, 167–172.
    2006.
  4. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    Materials science forum 524, 161–166.
    2006.
  5. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by speckle interferometry.
    Materials science forum 524, 465–470.
    2006.
  6. Choumad Ould, Emmanuelle Rouhaud, Manuel François, Jean-Louis Chaboche,
    A kinematic hardening finite elements model to evaluate residual stresses in shot-peened parts, local measurements by X-ray diffraction.
    Materials science forum 524, 161–166.
    2006.

Journal articles with no peer-review

  1. Emmanuelle Rouhaud, Delphine Retraint,
    Procédés de grenaillage pour pièces forgées.
    La Forge, 16_26.
    2015.

Invited conference talks

  1. Emmanuelle Rouhaud,
    Procédés de traitement de précontraintes et modélisation.
    Les contraintes résiduelles dans les pièces en titane : génération, mesure, effet sur la fatigue, ISAE, Toulouse, 29 janvier.
    2013.
  2. Manuel François, Delphine Retraint, Emmanuelle Rouhaud,
    Mesure des contraintes résiduelles par méthodes optiques.
    Les contraintes résiduelles dans les pièces en titane : génération, mesure, effet sur la fatigue Séminaire, ISAE, Toulouse, 29 janvier.
    2013.
  3. Emmanuelle Rouhaud, Delphine Retraint, Guillaume Montay, L. Roucoules, Manuel François,
    Shot peening processes: Form elaboration to XAO.
    Mechanical Surface treatment, Second French German meeting, Karlsruhe Allemagne, 15 novembre 2006.
    2006.
  4. Emmanuelle Rouhaud, G. Zahalak,
    The distribution-model in muscle mechanics - Coupled contraction and metabolic dynamics.
    Annual conference of the Biomedical Engineering Society (BMES), Philadelphia Etats-Unis, 13-17 octobre 2004.
    2004.
  5. Emmanuelle Rouhaud, G.I. Zahalak,
    A Distribution-Moment Model for Coupled Muscle Mechanics and Metabolic Dynamics.
    Second World Congress of Biomechanics, Amsterdam Hollande, 10-15 juillet 1994 (Conférence plénière)..
    1994.

Proceedings articles indexed in international databases

  1. Donato Gallitelli, Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Carl Labergère, Manuel François,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    9th International Conference on Residual Stresses (ICRS-9), Garmisch-Partenkirchen, October 2012, 6.
    2012.
  2. Jawad Badreddine, Donato Gallitelli, Matthieu Micoulaut, Emmanuelle Rouhaud, Sebastien Remy, Manuel François, Vincent Desfontaines, F. Chateau, P. Renaud, Gaelle Doubre-Baboeuf,
    Complete Simulation of ultrasonic shot-peening process.
    26th International Conference on Surface Modification Technologies (SMT-26), Lyon, June 2012, 6.
    2012.
  3. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Impact velocity and distribution in ultrasonic shot peening.
    International Conference on Shot Peening - ICSP11, South Bend - USA, September 2011, 6.
    2011.
  4. Jawhar El Gueder, Lionel Roucoules, Emmanuelle Rouhaud, Florent Cochennec,
    DFM synthesis approach based on product-process interface modelling. Application to the peen forming process.
    CIRP Design Conference 2010, Nantes, France, Avril 2010, 8.
    2010.
  5. Jawhar El Gueder, Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Product-process interface for effective product design and manufacturing in a DFM approach.
    International Congress Design and Modelling of Mechanical Systems CMSM'2009, Hammamet, Tunisie, Mars 2009, 8.
    2009.
  6. Jawhar El Gueder, Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Product-process interface for manufacturing data management as a support for DFM and virtual manufacturing.
    IDMME 2008 - 8th International Conference in Integrated Design and Manufacturing for Mechanical Engineering, Beijing, China, Octobre 2008, 8.
    2008.
  7. Christophe Cellard, Delphine Retraint, Emmanuelle Rouhaud, Manuel François, Ana Viguera-Sancho,
    Laser Shock Peening of a Titanium Alloy: Influence of Process Parameters.
    ICSP 10 (International Conference on Shot Peening), Tokyo, September 2008, 6.
    2008.
  8. Christophe Cellard, Pierre Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, Ana Viguera-Sancho,
    Residual Stress and Deformation Induced by Laser Shock Peening on Titanium Alloys.
    ICEM13 (International Conference on Experimental Mechanics), Alexandroupolis, July 2007, 9.
    2007.
  9. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by speckle interferometry combined with the drill of a groove.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  10. Christophe Cellard, Pierre Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, Ana Viguera-Sancho,
    Laser Shock Peening on Titanium Alloys : Residual Stress and Deformations.
    SMT21 (21st International Conference on Surface Modification Technologies), Paris, September 2007, 6.
    2007.
  11. Jian Lu, Pascal Lafon, Delphine Retraint, Emmanuelle Rouhaud,
    Integration of the Residual Stress in the Engineering Design of Mechanical Components and Structure using the Prestress Engineering Approach.
    16th CIRP Design Seminar, Alberta, July 2006, 10.
    2006.
  12. Florent Cochennec, Emmanuelle Rouhaud, Delphine Retraint, Sébastien Rouquette, Arjen Roos,
    Analysis of the impact of a shot at low velocity using the finite element method. Application to the ultrasonic shot peening process.
    Materials science forum 524-525, 337–342.
    2006.
  13. Sébastien Rouquette, Emmanuelle Rouhaud, Hervé Pron, Manuel François, Christian Bissieux,
    Thermo-elasto-plastic model for shot peening : a numerical and experimental approach.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 6.
    2005.
  14. Emmanuelle Rouhaud, Jean-Louis Chaboche, Manuel François, Choumad Ould, Sébastien Rouquette,
    Finite elements model of shot-peening, effects of material's constitutive law.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 6.
    2005.

Unindexed proceedings articles

  1. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    The Lagrangean description of a continuum corresponds to components of an Eulerian description with a 4D formalism.
    Colloque International des Théories Variationnelles, CITV 2014, Aix en Provence, France.
    2014.
  2. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between residual stress induced by conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on a Titanium alloy.
    9th European Conference on Residual Stresses (ECRS9), Troyes.
    2014.
  3. Emmanuelle Rouhaud, Olivier Ameline, Benoit Panicaud, Richard Kerner, Arjen Roos,
    On the use of a four-dimensional formalism to build linear or non-linear isotropic hypo-elastic behaviors with the Lie derivative.
    Proceedings of the 3rd International Conference on Material Modelling (ICMM3), Varsovie, Pologne.
    2013.
  4. Souhail Ben Afia, Delphine Retraint, Benoît Panicaud, Emmanuelle Rouhaud, Arjen Roos, Léa Le Joncour, Matthieu Micoulaut,
    Modélisation par transition d’échelles de la nanocristallisation d’un acier 316L par le procédé SMAT.
    11e Colloque National en Calcul des Structures (CSMA 2013).
    2013.
  5. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on the induced superficial mechanical properties of a Titanium alloy.
    International conference on Materials Innovations in Surface Engineering (MISE 2013) , Adelaide (Australia).
    2013.
  6. Jawad Badreddine, Donato Gallitelli, Emmanuelle Rouhaud, Matthieu Micoulaut, Sebastien Remy, Manuel François, V. Desfontaine, F. Château, P. Renaud and G. Doubre-baboeuf,
    Complete simulation of ultrasonic shot peening process.
    Proceedings of the 21st Surface modification Technologies conference (SMT21), Lyon 2012.
    2012.
  7. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Grenaillage ultrason : expériences et simulations.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  8. Cochennec F., Emmanuelle Rouhaud, L. Roucoules, B. Flan,
    Numerical and experimental investigation on shot-peening induced deformation. Application to sheet metal forming. Advances in X-ray Analysis,.
    Proceedings of the 8th International Conference on Residual Stresses (ICRS8), Denver USA, 52, 511-518, 2008.
    2008.
  9. C. Cellard, P. Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, A. Viguera-Sancho,
    Laser shock peening on titanium alloys: residual stress and deformations. Proceedings of the 21st International Conference on Surface Modification Technologies.
    Proceedings of the 21st International Conference on Surface Modification Technologies, 24-26 September 2007, Paris..
    2007.
  10. Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Mechanical Analysis to identify knowledge for a DFM approach. Application to Shot Peen-forming process.
    Virtual Concept 2006 conference, Cancun, November 2006, 10.
    2006.
  11. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    7th European Conference on Residual Stress (ECRS), Berlin.
    2006.
  12. Cellard C., P. Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, A. Viguera-Sancho,
    Application of laser shock peening to titanium alloys: determination of the residual stress profile and deformation.
    Proceedings of the 21st International Conference on Surface Modification Technologies (SMT), Paris France, 24-26 septembre 2006.
    2006.
  13. Rouquette S., Emmanuelle Rouhaud, H. Pron, Manuel François, C. Bissieux,
    Thermo-elastic-plastic model for shot peening: a numerical and experimental approach.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  14. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Nouvelle approche dans l¿analyse des contraintes résiduelles par l¿interférométrie de Speckle.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  15. Sébastien Rouquette, Choumad Ould, Emmanuelle Rouhaud, Manuel François, Jean-Louis Chaboche,
    Modélisation thermo-élasto-plastique du procédé de grenaillage par la méthode des éléments finis.
    17ème congrès français de mécanique, Troyes, Août 2005, 6.
    2005.
  16. Emmanuelle Rouhaud, A. Ouakka, C. Ould, J.-L. Chaboche, Manuel François,
    Finite Element model of Shot Peening, Effects of Material’s Constitutive Law.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  17. Emmanuelle Rouhaud, D. Deslaef,
    Analysis of a Finite Element Model of Shot Peening..
    Proceedings of the 6th International Conference on Residual Stress (ICRS6), Oxford Grande Bretagne, 10-12 juillet 2000..
    2000.
  18. G. Fadel, I. Tyvaert, Emmanuelle Rouhaud,
    Methodology to Create STL Files Out of Data Point Clouds Generated with the Coordinate Measuring Machine..
    Proceedings of the Tenth Annual Solid Freeform Fabrication Symposium, Austin Etats-Unis, 9-11 août 1999.
    1999.
  19. D. Deslaef, Emmanuelle Rouhaud,
    A Dynamic Finite Element Simulation for the Optimization of Shot Peening Processes,.
    Reliability, Failure, Porto Portugal, 19-22 juillet 1999.
    1999.
  20. David Deslaef, Emmanuelle Rouhaud, Shabnam Rasouli-Yazdi,
    3 D finite Element Models of Shot Peening Processes.
    ECRS 5, Zwijndrecht, NL, SEPTEMBER 1999.
    1999.
  21. David Deslaef, Emmanuelle Rouhaud, Jian Lu,
    Finite Element Modeling of Shot-Peening Processes.
    SEM'98, HOUSTON (Texas, USA), JUNE 1998, 3.
    1998.
  22. Milley A., Emmanuelle Rouhaud, J. Lu,
    Prediction of Residual Stress Relaxation in Three-Dimensional Structures under Tensile and Torsionnal.
    Proceedings of the 5th International Conference on Residual Stresses (ICRS5), Linköping Suède, 16-18 juin 1997.
    1997.
  23. Alain Milley, Emmanuelle Rouhaud, Jian Lu,
    Prediction of Residual Stress Relaxation in Three-dimensional Structures under Tensil and Torsional Loading.
    ICRS 5, LINKOPING (Sweden), JUNE 1997, 5.
    1997.
  24. Emmanuelle Rouhaud, Alain Milley, Jian Lu,
    Introduction of Residual Stress Fields in Finite Element Three-Dimensional Structures.
    ICRS 5, LINKOPING (Sweden), JUNE 1997, 5.
    1997.
  25. Emmanuelle Rouhaud, A. Milley, J. Lu,
    Introduction of Residual Stress Fields in Finite Element Three Dimensional Structures.
    Proceedings of the 5th International Conference on Residual Stresses (ICRS5), Linköping Suède, 16-18 juin 1997.
    1997.

Conference talks with no proceedings

  1. Hmaidouch H., C. Hamdan, B. Latouche, Emmanuel Guyot, Emmanuelle Rouhaud,
    Simulation of mechanical pickling of stainless steel coils.
    ICSP13, Montréal, Canada.
    2017.
  2. Jean-Patrick Goulmy, Emmanuelle Rouhaud, Matthieu Micoulaut, Yann Colaitis,
    Shot-Visual : a software to visualize shot dynamics.
    ICSP13, Montréal, Canada.
    2017.
  3. Maxime Gelineau, Laurent Barrallier, Emmanuelle Rouhaud, Régis Kubler, Q. Puydt,
    Residual stress field prediction and fatigue post processing for shot peened mechanical parts with complex geometry.
    ICSP13, Montréal, Canada.
    2017.
  4. Rida A., Emmanuelle Rouhaud, Matthieu Micoulaut, Ali Makke, Delphine Retraint,
    Molecular dynamics investigations for surface mechanical attrition treatment.
    ICSP13, Montréal, Canada.
    2017.
  5. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Modelling of the work hardening influence on the relaxation of residual stresses for shot peened Inconel 718 turbine disk.
    ICSP13.
    2017.
  6. Vincent Boyer, Jean-Patrick Goulmy, Maxime Gelineau, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté, Serge Kruch, Laurent Barrallier, Régis Kubler,
    Investigation of relevant experimental parameters for the description of work-hardening in shot peened materials.
    ICSP13, Montréal, Canada.
    2017.
  7. Ali Rida, Ali Makke, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Influence of grain size on the mechanical properties of nano-crystalline copper: insights from molecular dynamics simulation.
    ESAFORM, Dublin, Ireland.
    2017.
  8. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud, Patrice Peyre, Cyril Gorny, Gwénaëlle Proust,
    Experimental analysis of stainless steel 316L treatment by conventional shot peening, ultrasonic shot peening and laser peening processes.
    ICSP13, Montréal, Canada.
    2017.
  9. Gwénaëlle Proust, Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud, Patrice Peyre,
    Comparison of the Effects of Shot Peening, Surface Mechanical Attrition Treatment and Laser Shock Peening on a 316L Stainless Steel.
    7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7), Sydney (Australia), 2-7 July.
    2017.
  10. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Assessment of shot-peening on fatigue life of Inconel 718 turbine disk.
    ICSP13.
    2017.
  11. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Analyses expérimentale et numérique des contraintes résiduelles et de l’écrouissage générés au cours du grenaillage de l’inconel 718 Direct Aged.
    Colloque Mecamat, Aussois, France.
    2017.
  12. Vincent Boyer, Jean-Patrick Goulmy, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    A constitutive model for simulation of shot-peening and fatigue.
    ICSP13, Montréal, Canada.
    2017.
  13. Maxime Gelineau, Laurent Barrallier, Emmanuelle Rouhaud, Régis Kubler,
    Residual stress field prediction in shot peened mechanical parts with complex geometries.
    ICRS10, Sydney, Australie.
    2016.
  14. Maxime Gelineau, Emmanuelle Rouhaud, Laurent Barrallier, Régis Kubler,
    Residual stress field prediction in shot peened mechanical parts with complex geometries.
    ICOMP2016, Liège, Belgique.
    2016.
  15. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Relaxation thermique des contraintes résiduelles dans l’Inconel 718 : grenaillage et aspects microstructuraux.
    A3TS, Nancy, France.
    2016.
  16. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, ,
    Modèle analytique pour le calcul des contraintes résiduelles après grenaillage classique ou ultrasonore.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov..
    2016.
  17. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, S. Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Influence of initial microstructure of IN718 on the residual stresses and the work hardening induced by shot peening.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  18. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud, ,
    Influence du grenaillage sur de vie de disque de turbine en Inconel 718.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov..
    2016.
  19. Emmanuelle Rouhaud, Benoit Panicaud, Mingchuan Wang, F. Sidoroff, Richard Kerner,
    Eulerian approach with the Lie derivative for a thermodynamic construction of hyperelastic models.
    CITV, La Rochelle, France.
    2016.
  20. Ali Rida, Emmanuelle Rouhaud, Matthieu Micoulaut, Ali Makke,
    Etude des propriétés mécaniques des matériaux métalliques nanocristallins élaborés par grenaillage ultrason : approche par dynamique moléculaire.
    journée ROMEO, Reims.
    2016.
  21. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    Constitutive models for elastoplasticity from a 4D thermodynamic construction and its applications to the simulation of large deformations.
    NUMIFORM Troyes, France.
    2016.
  22. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Caractérisation par DRX des contraintes résiduelles et de l'écrouissage générés au cours du grenaillage de l'Inconel 718 Direct Aged.
    GFAC, Toulouse, France.
    2016.
  23. Vincent Boyer, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, ,
    Caractérisation par DRX des contraintes résiduelles et de l'écrouissage générés au cours du grenaillage de l'Inconel 718 Direct Aged.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov.
    2016.
  24. Maxime Gelineau, Laurent Barrallier, Emmanuelle Rouhaud, Régis Kubler, Q. Puydt,
    Caractérisation et modélisation des contraintes résiduelles de grenaillage dans les pièces à géométrie complexe.
    GFAC, Toulouse, France.
    2016.
  25. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Assessment of shot-peening on fatigue life of Inconel 718 turbine disk.
    International Conference on Fatigue Damage of Structural Materials XI, Hyannis Resort and Conference Center, Hyannis, MA (USA), 18-23 September.
    2016.
  26. C. Hamdan, Emmanuelle Guyot, Emmanuelle Rouhaud, B. Latouche,
    A model of shot dynamic for conventional shot peening processes.
    ICOMP2016, Liège, Belgique.
    2016.
  27. Vincent Boyer, Jean-Patrick Goulmy, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté,
    A constitutive model for simulation of shot-peening and fatigue.
    2nd International Conference on COmputational methods in Manufacturing Processes (ICOMP16) Liège (Belgium), 18-20 May.
    2016.
  28. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, F. Sidoroff, Richard Kerner,
    The covariance principle and a 4D formalism for rate formulations of constitutive models.
    ICDM2, Troyes, France.
    2015.
  29. Benoit Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, F. Sidoroff, Richard Kerner,
    Eulerian approach with the Lie derivative for a thermodynamic construction of 4D constitutive models. Application to elasto-plastic materials undergoing finite deformations.
    ICMM4, Berkeley, Etats-Unis.
    2015.
  30. Emmanuelle Rouhaud, C. Gay, Benoit Panicaud,
    Conditions to establish hyper-elasticity from hypoelastic models. Application to the identification of models of complex fluids.
    CMM4, Berkeley, Etats-Unis.
    2015.
  31. Guillaume Altmeyer, Emmanuelle Rouhaud, Benoit Panicaud, Mingchuan Wang, Richard Kerner, Arjen Roos,
    Viscoelasticity modeling in finite transformations using Lie derivative. Application to Maxwell time models..
    24th International Workshop on Computational Micromechanics of Materials (IWCMM24), Madrid, Spain,.
    2014.
  32. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    The rate of deformation is a true rate – Application to elastic-inelastic decompositions.
    European Mechanics of Materials Conference (EMMC14), Gothenburg, Sweden.
    2014.
  33. Ali Makke, Benoît Panicaud, Zhidan Sun, Lea Le Joncour, Delphine Retraint, Emmanuelle Rouhaud,
    Plastic deformation and damage initiation in nanocrystalline metals.
    International Colloquium of Mechanics - Multi-physics modeling of solids, Paris, October 6-8.
    2014.
  34. Emmanuelle Rouhaud, F. Dussoulier, Matthieu Micoulaut, Jawad Badreddine, Sebastien Remy, Delphine Retraint, Donato Galitelli, Guillaume Montay, Manuel François, Vincent Desfontaine, Pierre Renaud,
    Model of shot dynamics for shotpeening of parts with complex geometries.
    First International Conference on Computational methods in Manufacturing (ICOMP14) Saint-Etienne, France.
    2014.
  35. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, Jawad Badreddine, Carl Labergère, Manuel Francois,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  36. Emmanuelle Rouhaud, O. Ameline, Guillaume Altmeyer, Benoit Panicaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Construction of frame-indifferent constitutive models for viscoelastic materials undergoing finite transformations with the four-dimensional formalism of the theory of relativity.
    9th International Conference on the Mechanics of Time-Dependent Materials (MTDM), Montréal.
    2014.
  37. Jawad Badreddine, Matthieu Micoulaut, Sebastien Remy, Emmanuelle Rouhaud, Pierre Renaud, F. Chateau, Vincent Desfontaine,
    A model for ultrasonic shot peening: optimization of chamber design in an industrial context.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  38. Benoit Panicaud, Mingchuan Wang, Emmanuelle Rouhaud, Arjen Roos, Richard Kerner,
    On the use of a four-dimensional formalism to build linear or non-linear anisotropic elastic behaviors. Application to micromechanical problems.
    International workshop on Computational mechanics of Materials (IWCMM XXIII) Singapore,.
    2013.
  39. Benoit Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    On the use of a four-dimensional formalism to build hypo-elastic or visco-elastic constitutive behavior models.
    Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), Montréal, Canada.
    2013.
  40. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Léa Le Joncour, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Modelling of grain refinement induced by SMAT process, using a complete numerical chaining methodology.
    Proceedings of the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNSMP), Oulu Finland.
    2013.
  41. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    Stress rate definitions with the four-dimensional formalism of differential geometry.
    International workshop on Computational mechanics of Materials (IWCMM XXII) Baltimore USA.
    2012.
  42. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Sébastien Remy, Vincent Desfontaine, Pierre Renaud,
    3D model of shot dynamics for ultrasonic shot peening.
    International Conference on Residual Stresses, ICRS9, Garmisch-Partenkirchen, Allemagne, 2012.
    2012.
  43. Guillaume Montay, Emmanuelle Rouhaud, A Sornin,
    Analyse des contraintes résiduelles par la méthode de la rainure et du trou incrémental.
    Oujda 10ième Congrès de Mécanique, 19, 22 Avril 2011, Oujda, Maroc.
    2011.
  44. Cochennec F., Emmanuelle Rouhaud, B. Flan, L. Roucoules,
    Numerical simulation of peen forming induced deformation: modeling and experimental validation.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  45. Jawad Badreddine, Emmanuelle Rouhaud, Delphine Retraint, Matthieu Micoulaut, Manuel François,
    Modeling of ultrasonic shot peening: dynamic of shot during the peening process.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  46. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Modeling of ultrasonic shot peening : Dynamic of shot during the peening process.
    ECRS-8, Riva del Garda , June 2010.
    2010.
  47. Cochennec F., Emmanuelle Rouhaud, Manuel François, Lionel Roucoules,
    Eigenstrain based model for incremental hole drilling residual stress measurement.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  48. N. Hirai, K. Tosha, Emmanuelle Rouhaud,
    Finite Element Analysis of Shot Peening -On the Profile of a single dent.
    Proceedings of the 10th International Conference on Shot Peening, Tokyo, Japan, 15-18 septembre 2008.
    2008.
  49. A. Maras, Guillaume Montay, O. Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by Speckle Interferometry combined with the drill of a groove.
    Proceedings of the 13rd International Conference on Experimental Mechanics (ICEM13), Alexandroupolis Grèce, 1- 6 juillet 2007..
    2007.
  50. S. Rouquette, Emmanuelle Rouhaud, Arjen Roos, H. Pron, Manuel François, C. Bissieux,
    Thermomechanical modeling of a steel plate impacted by a shot and experimental validation..
    The 7th European Conference on Residual Stresses (ECRS7), Berlin Allemagne, 13-15 septembre 2006..
    2006.
  51. H. Nobuyuki, K. Tosha, Emmanuelle Rouhaud,
    Finite Element Analysis of Shot Peening-On the form of a single dent.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  52. Emmanuelle Rouhaud, D. Deslaef,
    Influence of shot’s material on shot peening, a finite element model.
    Materials Science Forum, The 6th European Conference on Residual Stresses (ECRS6) Coimbra, 2002.
    2002.
  53. D. Deslaef, Emmanuelle Rouhaud,
    A Dynamic Finite Element Simulation for the Optimization of Shot Peening Processes.
    Integrity, Reliability, Failure, Porto Portugal, 19-22 juillet 1999..
    1999.
  54. David Deslaef, Emmanuelle Rouhaud,
    A dynamic finite element simulation for the optimisation of shot peening processes.
    IRF 99, Porto, Portugal, JULY 1999.
    1999.
  55. Emmanuelle Rouhaud, G.I. Zahalak,
    Interaction Between Contraction and Metabolism in Skeletal Muscle: A Distribution-Moment Model.
    Distribution-Moment Model, IVth International Symposium on Computer Simulation in Biomechanics, Montlignon France, 1-3 juillet 1993.
    1993.

Conference posters

  1. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Analyse expérimentale et numériques des contraintes résiduelles et de l’écrouissage générés au cours du grenaillage de l’Inconel 718 Direct Aged.
    Colloque MECAMAT – Fatigue des Structures et des Matériaux – Aussois, 24-27 janvier.
    2017.
  2. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Surface Mechanical Attrition Treatment effect on gas nitriding treatment of a martensitic steel.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  3. Mingchuan Wang, Emmanuelle Rouhaud, Benoit Panicaud,
    Conditions to establish hyperelasticity from hypoelastic models and vice-versa,.
    Mecamat, Aussois, France.
    2016.
  4. F. Dussoulier, Donato Gallitelli, Emmanuelle Rouhaud, Jawad Badreddine, Delphine Retraint, Matthieu Micoulaut,
    Models for shot dynamics: conventional and ultrasonic shot peening.
    9th European Conference on Residual Stresses (ECRS9), Troyes.
    2014.
  5. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, Guillaume Altmeyer, Richard Kerner, Arjen Roos,
    Incremental constitutive equation for elastoplasticity in finite transformations using a four-dimensional formalism..
    Multi-Physics modeling of solids (MPMS) Palaiseau, France.
    2014.

Scientific books (or chapters)

  1. Emmanuelle Rouhaud, David Deslaef, Jian Lu, Jean-Louis Chaboche,
    Modeling of Residual Stress, Shot Peening.
    Handbook on residual stress, 116–148.
    SEM, USA, 2005.

Popularization books (or chapters)

  1. Micoulaut Matthieu, Emmanuelle Rouhaud, Emmanuel Guyot,
    Site d’information sur ShotVisual.
    2016.
  2. Micoulaut Matthieu, Emmanuelle Rouhaud, Emmanuel Guyot,
    Incremental constitutive models for elastoplastic materials undergoing finite deformations by using a four-dimensional formalism.
    The Shot Peener.
    Fall, 2016.

Books or journal issues directions

  1. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Proceedings of the 9th International Conference on Residual Stresses (ECRS-9).
    Adavanced Materials Research 996.
    Trans Tech Publications, 2014.

Other productions

  1. Emmanuelle Rouhaud, Delphine Retraint,
    Shot peening processes, Materials and Mechanics.
    Invited seminar, Laboratory for Multi-Scale Mechanics / Mechanical Engineering, École Polytechnique de Montréal, Montréal, Canada, April 24th.
    2014.
  2. Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Metal Finishing News.
    Metal Finishing News 4, 26–29.
    2003.
  3. Emmanuelle Rouhaud, Alain Milley,
    Rapport issu d'un contrat avec un équipementier automobile.
    2001.