Peer-reviewed journal articles indexed in international databases

  1. Intissar FRIH, Guillaume MONTAY, Pierre-Antoine ADRAGNA,
    Microstructure, Hardness, and Residual Stress Distributions in T-Joint Weld of HSLA S500MC Steel.
    Metallurgical and Materials Transactions A 48(3), 1103–1110.
    Springer US, 2017.
  2. Yunlong Zhu, Julien Vaillant, Manuel François, Guillaume Montay, Aurelien Bruyant,
    Co-axis digital holography based on sinusoidal phase modulation using generalized lock-in detection.
    Applied Optics 56(13), F97–F104.
    Optical Society of America, 2017.
  3. Julien Gardan, Duy Cuong Nguyen, Lionel Roucoules, Guillaume Montay,
    Characterization of Wood Filament in Additive Deposition to Study the Mechanical Behavior of Reconstituted Wood Products.
    Journal of Engineered Fibers and Fabrics 11(4), 56–63.
    Association of Nonwoven Fabrics Industry INDIA, 2016.
  4. Xiaohui ZHANG, Xiao-Lu GONG, Guillaume MONTAY,
    The influences of compression temperature on the fiber structure and tensile properties of hemp reinforced polypropylene composites.
    Advanced Materials Research 1073-1076, 62–65.
    2015.
  5. Thomas Maurer, Joseph Marae-Djouda, Ugo Cataldi, Arthur Gontier, Guillaume Montay, Yazid Madi, Benoît Panicaud, Demetrio Macias, Pierre-Michel Adam, Gaëtan Lévêque, Thomas Bürgi, Roberto Caputo,
    The beginnings of plasmomechanics: towards plasmonic strain sensors.
    Frontiers of Materials science 9(2), 170–177.
    Springer, 2015.
  6. Rana Nicolas, Gaëtan Lévêque, Joseph Marae-Djouda, Guillaume Montay, Yazid Madi, Jérôme Plain, Ziad Herro, Michel Kazan, Pierre-Michel Adam, Thomas Maurer,
    Plasmonic mode interferences and Fano resonances in Metal-Insulator- Metal nanostructured interface.
    Scientific Reports 9(5), 14419.
    2015.
  7. Abel CHEROUAT, Guillaume MONTAY, Florent ILCZYSZYN,
    Numerical simulation of composite hemp fibers behavior for aircraft application.
    Advanced Materials Research 1099(2015), 25–31.
    Trans Tech Publications, Switzerland, 2015.
  8. Wiem Toumi Ajimi, Delphine Retraint, Guillaume Montay,
    Structure-mechanical property relationship in hot-dip galvanized S355K2+N steel plates.
    Advanced Materials Research 996, 884–889.
    Trans Tech Publications, 2014.
  9. Johann Petit, Guillaume Montay, Manuel François,
    Strain rate measurements by speckle interferometry for necking investigation in stainless steel.
    Int. J. of Solids and Structures 51, 540–550.
    Elsevier, 2014.
  10. Caroline Guinard, Guillaume Montay, Vincent Guipont, Michel Jeandin, Jérémie Girardot, Matthieu Schneider,
    Residual Stress Analysis of Laser-Drilled Thermal Barrier Coatings Involving Various Bond Coats.
    Journal of Thermal Spray Technology 24(1-2), 252–262.
    Springer, 2014.
  11. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Preface.
    Advanced Materials Research 996.
    2014.
  12. Florent Ilczyszyn, Abel Cherouat, Guillaume Montay,
    Effect of hemp fibre morphology on the mechanical properties of vegetal fibre composite material.
    Advanced Materials Research 875-877, 485–489.
    Trans Tech Publications, Switzerland, 2014.
  13. Laura Raceanu, Virgil Optasanu, Tony Montesin, Guillaume Montay, Manuel François,
    Shot-peening of pre-oxidized plates of zirconium: Influence of residual stress on oxidation.
    Oxidation of Metals 79(1-2), 135–145.
    Springer, 2013.
  14. Johann Petit, Laurent Waltz, Guillaume Montay, Delphine Retraint, Arjen Roos, Manuel François,
    Multilayer modelling of stainless steel with a nanocrystallised superficial layer.
    Materials Science and Engineering: A 536, 124–128.
    Elsevier, 2012.
  15. Florent Ilczyszyn, Abel Cherouat, Guillaume Montay,
    Mechanical modeling of hemp fibres behaviour using digital imaging treatment.
    Advanced Materials Research 423, 143–153.
    Trans Tech, 2012.
  16. Florent Ilczyszyn, Abel Cherouat, Guillaume Montay,
    Mechanical behaviour and properties characterization of hemp fibres [Caractérisation des propriétés mécaniques de fibres de chanvre].
    Materiaux et Techniques 100(5), 451–457.
    EDP Sciences, 2012.
  17. Abel Cherouat, Xiao-Lu Gong, Florent Ilczyszyn, S Jin, Guillaume Montay,
    Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers.
    International Journal of Advanced Materials Research 1, 270–273.
    2012.
  18. Johann Petit, Guillaume Montay, Manuel François,
    Localisation phenomenon investigation on SMATed stainless steel samples by speckle interferometry.
    Strain 47(4), 363–371.
    2011.
  19. Alix Bonaventure, Danielle Ayrault, Guillaume Montay, Vincent Klosek,
    Evaluation of residual stresses in dissimilar weld joints.
    Materials Science Forum 681, 182–187.
    2011.
  20. Guillaume Montay, Olivier Sicot, Afaf Maras, Emmanuelle Rouhaud, Manuel François,
    Two dimensions residual stresses analysis through incremental groove machining combined with electronic speckle pattern interferometry.
    Experimental Mechanics 49(4), 459–469.
    2009.
  21. Johann Petit, Guillaume Montay, Manuel François,
    Strain rate evolution in aluminium alloy measured by ESPI during tensile test.
    Materials Science Forum 614, 155–162.
    2009.
  22. Bruno Guelorget, Manuel François, Guillaume Montay,
    Strain localization band width evolution by electronic speckle pattern interferometry strain rate measurement.
    Scripta Materialia 60(8), 647–650.
    2009.
  23. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, Christian Vial-Edwards, Ignacio Lira,
    Strain and strain rate measurement during the bulge test by electronic speckle pattern interferometry.
    Journal of Materials Processing Technology 184(1-3), 428–435.
    2007.
  24. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, Christian Vial-Edwards, Ignacio Lira,
    Analysis of plastic strain localization by a combination of the speckle interferometry with the bulge test.
    Optics and Lasers in Engineering 45(1), 222–228.
    2007.
  25. Bruno Guelorget, Manuel François, Christian Vial-Edwards, Guillaume Montay, Laurent Daniel, Jian Lu,
    Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset.
    Materials Science and Engineering A 415(1-2), 234–241.
    2006.
  26. Guillaume Montay, Akim Cherouat, Jian Lu,
    Residual stress analysis in crankshaft using the hole drilling method.
    Materials Science Forum 524-525, 537–542.
    2006.
  27. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by Speckle Interferometry.
    Materials Science Forum 524-525, 465–470.
    2006.
  28. Guillaume Montay, Jacek Bulhak, Yves Surrel, Alain Vautrin, Jian Lu,
    Use of full field of strains found by grating shearography to determine residual stress.
    Journal of Strain Analysis for Engineering Design 40(7), 621–630.
    2005.
  29. Guillaume Montay, Olivier Sicot, X.-L. Gong, Akim Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Materials Science Forum 490-491, 533–538.
    2005.
  30. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Material Science Forum 490, 533–539.
    2005.
  31. Jian Luo, Guillaume Montay, Jian Lu,
    An advanced residual stress determination for 3D cylinder structure.
    Materials Science Forum 490-491, 62–66.
    2005.
  32. Guillaume Montay, Akim Cherouat, Amir Nussair, Jian Lu,
    Residual stresses in coating technology.
    Journal of Materials Science and Technology 20(SUPPL.), 81–84.
    2004.
  33. Guillaume Montay, Akim Cherouat, Claude Garnier, Jian Lu,
    Determining Residual Stress in Spherical Components: A New Application of the Hole-Drilling Method.
    Journal of Testing and Evaluation 32(1), 73–79.
    2004.
  34. Guillaume Montay, Abel Cherouat, Claude Garnier, Jian Lu,
    Determining residual stress in spherical component: a new application of the hole drilling method.
    Journal of testing and evaluation 32(1), 73–79.
    2004.
  35. Akim Cherouat, Guillaume Montay, Jian Lu,
    Study of residual stresses in complex parts by experimental and numerical methods.
    Materials Science Forum 404-407, 251–256.
    2002.
  36. Guillaume Montay, Akim Cherouat, Jian Lu, Luc Bianchi, Nicolas Baradel,
    Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi layer materials : infLuence of temperature and substrate on ZrO2-Y2-O3 8 wt.% coatings.
    Journal of Surface and Coating Technology 155(2-3-4), 152–160.
    2002.
  37. Zhu Wu, Guillaume Montay, Jian Lu,
    High sensitivity moiré interferometry and incremental hole-drilling method for residual stress measurement [Mesure des contraintes résiduelles par la technique de l'interférométrie de moiré de trés grande sensibilité et la méthode du perçage incréental].
    Comptes Rendus de l'Academie de Sciences - Serie IIb: Mecanique 329(8), 585–593.
    2001.
  38. Yong Han, Kewei Xu, Guillaume Montay, Jian Lu,
    Evaluation of nanostructured carbonated hydroxyapatite coatings formed by a hybrid process of plasma spraying and hydrothermal synthesis.
    Journal of Biomedical Materials Research 55(4), 596–602.
    2001.

Unindexed peer-reviewed journal articles

  1. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    Materials science forum 524, 161–166.
    2006.
  2. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by speckle interferometry.
    Materials science forum 524, 465–470.
    2006.
  3. Abel Cherouat, Guillaume Montay, Jian Lu,
    Study of residual stresses in complex parts by experimental and numerical methods.
    Journal of Material Science Forum -1, 251–256.
    2002.
  4. Guillaume Montay, Abel Cherouat, Jian Lu, Luc Bianchi, N Baradel,
    Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi layer materials : influence of temperature and substrate on ZrO2-Y2-O3 8 wt.% coatings.
    Journal of Surface and Coatings Technology 155(-1), 152–160.
    2002.
  5. Guillaume Montay, Akim Cherouat, Jian Lu,
    Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy.
    Journal of Neutron Research 9(2-4), 337–344.
    2001.

Invited conference talks

  1. Guillaume Montay,
    Effet de la température d’élaboration et du vieillissement sur les contraintes résiduelles.
    4ème colloque Fibres naturelles et Polymères. Troyes 2016..
    2016.
  2. Emmanuelle Rouhaud, Delphine Retraint, Guillaume Montay, L. Roucoules, Manuel François,
    Shot peening processes: Form elaboration to XAO.
    Mechanical Surface treatment, Second French German meeting, Karlsruhe Allemagne, 15 novembre 2006.
    2006.

Proceedings articles indexed in international databases

  1. Yunlong Zhu, Julien Vaillant, Guillaume Montay, Aurélien Bruyant,
    Generalized lock-in detection applied to lens-less digital holographic interferometry.
    Optics InfoBase Conference Papers Part F8-DH 2016, 3.
    2016.
  2. ZHU Yunlong, Julien Vaillant, Guillaume Montay, Aurélien Bruyant,
    Generalized lock-in detection applied to lens-less digital holographic interferometry.
    Digital Holography and Three-Dimensional Imaging, DTh3C. 3.
    Optical Society of America, 2016.
  3. XiaoHui ZHANG, Xiao-Lu GONG, Guillaume MONTAY,
    The influences of compression temperature on the fiber structure and tensile properties of hemp reinforced polypropylene composites.
    International Conference on Energy, Environment and Sustainable Development (EESD 2014) Oct. 25-26, 2014 Nanjing, China.
    2014.
  4. Intissar Frih, Pierre-Antoine Adragna, Guillaume Montay,
    Influence of welding defects on residual stresses: Numerical study.
    Advanced Materials Research 996, 506–511.
    trans-tech, 2014.
  5. Johann Petit, Danièle Wagner, Nicolas Ranc, Guillaume Montay, Manuel François,
    Comparison of different techniques for the monitoring of the Piobert-Lüders bands development.
    13th International Conference on Fracture (ICF13), Beijing 26-30 mai 2013 5, 3797–3809.
    2013.
  6. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Guillaume Montay, Laurent Waltz,
    Evolution of the residual stress state after surface mechanical attrition treatment and low temperature plasma nitriding.
    The 9th International Conference on Residual Stresses (ICRS9), Garmisch-Partenkirchen,Germany, October 2012, 1.
    2012.
  7. Daniele Ayrault, Alix Bonaventure, Olivier Asserin, Guillaume Montay, Vincent Klosek,
    Numerical and experimental evaluation of residual stresses in dissimilar weld joints.
    American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6(PARTS A AND B), 1515–1522.
    2011.
  8. Abel Cherouat, Xiao-Lu Gong, Florent Ilczyszyn, Shuai Jin, Guillaume Montay,
    Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers.
    The 2nd International Conference on Advances in Materials and Manufacturing Processes (2nd CAMMP), GuiLin Chine, December 2011, 6.
    2011.
  9. Mahdi Chemkhi, Yuanyuan Pi, Delphine Retraint, Guillaume Montay, Clémence Demangel, Claude Garnier, Farid Belhacene, Hicham Benhayoune,
    Effect of SMAT parameters on microstructural features using DOE technique.
    11th International Congress on Shot Penning, South Bend, Indiana, USA, September 2011, 6.
    2011.
  10. Guillaume Montay, Bruno Guelorget, Ignacio Lira, Marie Tourneix, Manuel François, Cristian Vial-Edwards,
    Strain localization analysis by combination of the ESPI with bulge test.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  11. Bruno Guelorget, Manuel François, Guillaume Montay,
    Strain evaluation in the neck of a tensile test specimen by ESPI strain rate measurement.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  12. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by speckle interferometry combined with the drill of a groove.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  13. Bruno Guelorget, Manuel François, Guillaume Montay, Laurent Daniel, Jian Lu,
    Uncertainty evaluation of strain rate measurement by ESPI during a tensile test.
    Speckle 06, Nimes, September 2006, 6.
    2006.
  14. Guillaume Montay, Abel Cherouat, Jian Lu,
    Residual stress analysis in crankshaft using the hole drilling method.
    7th European Conference on Residual Stresses, Berlin (Allemagne), September 2006.
    2006.
  15. Claude Garnier, Jian Lu, Alain Milley, Guillaume Montay, Delphine Retraint,
    Presentation of a general approach for taking into account the residual stress in the design of automotive components.
    SAE Congress, Detroit, April 2005, 539–546.
    2005.
  16. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, C Vial,
    Combinaison de l'interférométrie de speckle à l'essai de gonflement pour l'analyse la localisation.
    CMOI, MARSEILLE, Novembre 2005, 6.
    2005.
  17. Guillaume Montay, Ignacio Lira, Marie Tourneix, Bruno Guelorget, Manuel François, C Vial,
    Analysis of localization of strains by ESPI, in equibiaxial loading (bulge test) of copper sheet metals.
    fringe 2005, stuttgart, Septembre 2005, 4.
    2005.
  18. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th International conference on residual stress, Xian (China) June 2004.
    2004.
  19. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th Inter. Conf. On Residual Stresses, Xi’An, Chine, Juin 2004 CD, 6.
    2004.
  20. Guillaume Montay, Abel Cherouat, None Nussair, Jian Lu,
    Caractérisation et modélisation de l'aptitude à la déformation des structures souples.
    4ème Congrès National en Mécanique expérimentale des matériaux et des structures, Tarbes, Janvier 2004.
    2004.
  21. Abel Cherouat, Guillaume Montay, Jian Lu,
    Studies of residual stresses in complex parts by the finite element method.
    6th European Conference on Residual stresses, Lisbone (Portugal), July 2002.
    2002.

Unindexed proceedings articles

  1. Abel CHEROUAT, Guillaume MONTAY, Youcef BOUZIDI,
    Thermo-mechanical characterization of composite hemp fibers behavior.
    6 th International Symposium on Aircraft Materials ACMA 2016 Agadir - Morocco.
    2016.
  2. Intissar Frih, Pierre-Antoine Adragna, Guillaume Montay, Alexandre Thomas,
    Dimensionnement mécano-fiabiliste des structures soudées en acier à hautes propriétés mécaniques.
    21ème CONGRÉS FRANÇAIS DE MÉCANIQUE [CFM2013].
    2014.
  3. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Guillaume Montay, Clémence Demangel,
    Duplex surface treatments combining surface mechanical attrition treatment (SMAT) and low temperature plasma nitriding.
    The 12th International Workshop on Plasma-Based Ion Implantation and Deposition, Poitiers (France), July 4.
    2013.
  4. Mahdi Chemkhi, Delphine Retraint, Guillaume Montay, Claude Garnier, Farid Belhacene,
    Les plans d'expériences appliqués à l'optimisation des paramètres de nanocristallisation par SMAT (Surface Mechanical Attrition Treatment).
    MATERIAUX 2010 , Nantes, France, Octobre 2010, 11.
    2010.
  5. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    7th European Conference on Residual Stress (ECRS), Berlin.
    2006.
  6. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Nouvelle approche dans l¿analyse des contraintes résiduelles par l¿interférométrie de Speckle.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  7. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Optimisation de la méthode du trou incrémental pour la mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  8. Guillaume Montay, Abel Cherouat, Jian Lu,
    Influence des contraintes résiduelles dans des dépôts de carbure de tungstène.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  9. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Application de la méthode de la flèche à la détermination des contraintes résiduelles dans les composites stratifiés.
    16ème Congrès Français de Mécanique, 1-5 sep 2003 Nice, CD ID.182, 6.
    2003.
  10. Abel Cherouat, Guillaume Montay, Jian Lu,
    Méthode numérique et expérimentale pour la détermination des contraintes résiduelles dans les dépôts.
    Matériaux 2002 de la Conception à la Mise en œuvre, Tours (France), octobre 2002.
    2002.
  11. Guillaume Montay, Abel Cherouat, Jian Lu,
    Influence des contraintes résiduelles dans les dépôts de carbure de tungstène : influence de la géométrie et du mode de projection.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux Troyes (France), MARS 2002.
    2002.
  12. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Approche des contraintes résiduelles dans les composites stratifiés par la méthode de la compliance.
    Colloque GFAC, Caractérisation expérimentale des contraintes : techniques avancées et nouveaux matériaux, Troyes, mars 2002, 173–178.
    2002.
  13. Guillaume Montay, Abel Cherouat, Jian Lu,
    The hole drilling technique applied on complex shapes.
    Annual Conference on Experimental and Applied Mechanics, Portland (Oregon, USA), JUNE 2001, 3.
    2001.
  14. Jian Lu, Guillaume Montay, Abel Cherouat, H Bianchi, N Baradel,
    Role of substrate nature and the spraying temperature on the residual stress distribution in plasma sprayed zirconia coating.
    6th International Conference on Residual Stresses, Oxford (United Kingdom), JULY 2000.
    2000.
  15. Guillaume Montay, Abel Cherouat, Jian Lu, H Bianchi, N Baradel,
    Modélisation des contraintes résiduelles introduites dans les matériaux multicouches.
    12e Journée Nationale des Composites, Paris (France), NOVEMBRE 2000.
    2000.
  16. Guillaume Montay, Abel Cherouat, Jian Lu,
    Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy.
    International Conference Stress Evaluation, MECA-SENS 2000, Reims (France), DECEMBER 2000, 1.
    2000.

Conference talks with no proceedings

  1. Joseph Marae Djouda, Arthur Gontier, Yazid MAdi, Pierre-Michel Adam, Guillaume Montay, Samuel. S. Lamarre, Anna. M. Ritcey, Thomas Maurer,
    Organization of gold nanoparticles via copolymer templates.
    5th International Conference on Advanced Nanomaterials, Aveiro (Portugal), 2-4 juillet 2014.
    2014.
  2. Thomas Maurer, Joseph Marae-Djouda, Guillaume Montay, Pierre-Michel Adam, Yazid Madi, U. Cataldi, T. Bürgi, R. Caputo,
    Nanogauges for optical strain sensors.
    Nano2014, Moscow (Russia), 13-18 juillet 2014.
    2014.
  3. Emmanuelle Rouhaud, F. Dussoulier, Matthieu Micoulaut, Jawad Badreddine, Sebastien Remy, Delphine Retraint, Donato Galitelli, Guillaume Montay, Manuel François, Vincent Desfontaine, Pierre Renaud,
    Model of shot dynamics for shotpeening of parts with complex geometries.
    First International Conference on Computational methods in Manufacturing (ICOMP14) Saint-Etienne, France.
    2014.
  4. Wiem Toumi Ajimi, Farid Belahcene, Jazzar Hoblos, Delphine Retraint, Guillaume Montay,
    In situ ultrasonic non destructive evaluation of applied stress in prestressed bars.
    European congress and exhibition on advanced materials and processes, Montpellier, Septembre 2011.
    2011.
  5. Wiem Toumi Ajimi, Farid Belahcene, Jazzar Hoblos, Delphine Retraint, Guillaume Montay,
    Evaluation non destructive, par ultrasons, de l'effort présent dans des barres de précontrainte en service.
    20ème Congrès Français de Mécanique, Besançon, Août 2011.
    2011.
  6. Guillaume Montay, Emmanuelle Rouhaud, A Sornin,
    Analyse des contraintes résiduelles par la méthode de la rainure et du trou incrémental.
    Oujda 10ième Congrès de Mécanique, 19, 22 Avril 2011, Oujda, Maroc.
    2011.
  7. Mahdi Chemkhi, Delphine Retraint, Guillaume Montay, Farid Belahcene,
    Les plans d'expériences appliqués à l'optimisation des paramètres de nanocristallisation par SMAT.
    JMC12, Troyes, France, Août 2010.
    2010.
  8. A. Maras, Guillaume Montay, O. Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by Speckle Interferometry combined with the drill of a groove.
    Proceedings of the 13rd International Conference on Experimental Mechanics (ICEM13), Alexandroupolis Grèce, 1- 6 juillet 2007..
    2007.

Books or journal issues directions

  1. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Proceedings of the 9th International Conference on Residual Stresses (ECRS-9).
    Adavanced Materials Research 996.
    Trans Tech Publications, 2014.