Peer-reviewed journal articles indexed in international databases

  1. Chuan Zhang, Julien Gardan, Feng Zhu, Houssem Badreddine, Xiao-Lu Gong,
    Thermal Behavior Analysis of open-Cell Metal Foams Manufactured by Rapid Tooling.
    Journal of Porous Media 20.
    BegellHouse, 2017.
  2. Houssem Badreddine, Zhenming Yue, Khemais Saanouni,
    Modeling of the induced plastic anisotropy fully coupled with ductile damage under finite strain.
    International Journal of Solids and Structure 108, 49–62.
    ELSEVIER, 2017.
  3. Evangelia Diamantopoulou, Weje Liu, Carl Labergère, Houssem Badreddine, Khemais Saanouni, P. Hu,
    Micromorphic constitutive equations with damage applied to metal forming.
    International Journal of Damage Mechanics DOI: 10.1177/1056789516684650(DOI: 10.1177/1056789516684650).
    SAGE, 2017.
  4. Zhenming Yue, Houssem Badreddine, Khemais Saanouni, E.S. Perdahcioglu,
    Experimental and numerical studies of AL7020 formability under orthogonal loading paths with considering yield surface distortion.
    International Journal of Mechanical Sciences 123, 151–161.
    ELSEVIER, 2017.
  5. Houssem Badreddine, Khemais Saanouni,
    On the full coupling of plastic anisotropy and anisotropic ductile damage under finite strains.
    International Journal of Damage (In press).
    Sage, 2016.
  6. Zhenming Yue, Houssem Badreddine, Khemais Saanouni, X.C. Zhuang, J. Gao,
    Numerical simulation of sheet metal blanking based on fully coupled elastoplasticity-damage constitutive equations accounting for yield surface distortion-induced anisotropy.
    International Journal of Damage Mechanics DOI: 10.1177/1056789516673886.
    SAGE, 2016.
  7. Houssem Badreddine, Carl Labergère, Khemais Saanouni,
    Ductile damage prediction in sheet and bulk metal forming.
    Comptes Rendus Mécanique 344, 296–318.
    ELSEVIER, 2016.
  8. Zhenming Yue, Houssem Badreddine, T. Dang, Khemais Saanouni, Erman Tekkaya,
    Formability prediction of AL7020 with experimental and numerical failure criteria.
    Journal of Materials Processing Technology 218, 80 – 88.
    ELSEVIER, 2015.
  9. Sabeur Msolli, Houssem Badreddine, Carl Labergere, Marion Martiny, Guillaume Robin, Mohamed Jrad, Khemais Saanouni, François Choquart,
    Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets.
    International Journal of Mechanical Sciences 99, 262–273.
    ELSEVIER, 2015.
  10. Houssem Badreddine, Khemais Saanouni, Trong Dung Nguyen,
    Damage anisotropy and its effect on the plastic anisotropy evolution under finite strains.
    International Journal of Solids and Structures 63, 11–31.
    ELSEVIER, 2015.
  11. Houssem Badreddine, Khemais Saanouni,
    Advanced Anisotropic Damage Model Fully Coupled with Anisotropic Plasticity.
    Applied Mechanics and Materials, vol 784, “Damage Mechanics: Theory, Computation and Practice".
    Trans Tech publications Inc, 2015.
  12. Chuan Zhang, Feng Zhu, Houssem Badreddine, Xiao-lu Gong,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    Journal of Materials Science and Chemical Engineering 3, 113–118.
    Scientific Research, 2015.
  13. Chuan Zhang, Feng Zhu, Houssem Badreddine, Xiao-lu Gong,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    Journal of Materials Science and Chemical Engineering 3, 113–118.
    Scientific Rechearch, 2015.
  14. Zhenming Yue, C. Soyarslan, Houssem Badreddine, Khemais Saanouni, Erman Tekkaya,
    . Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental–numerical methodology with various triaxialities.
    International Journal of Damage Mechanics 24(5), 683–710.
    Sage, 2015.
  15. Zhenming Yue, Celal Soyarslan, Houssem Badreddine, Khemais Saanouni, Erman Takkaya,
    Inverse identification of CDM model parameters for DP1000 steel sheets using a hybrid experimental-numerical methodology spanning various triaxiality ratios.
    Key Engineering materials 554-557, 2103–2110.
    Scientific.Net, 2013.
  16. Houssem Badreddine, Khemais Saanouni, Abdel Dogui,
    On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming.
    International journal of plasticity 26, 1541–1575.
    2010.
  17. Houssem Badreddine, Carl Labergere, Khemais Saanouni, Wajdi Rajhi, Alain Rassineux, Dominic Kircher,
    elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    Int. J. of Metal Forming 1, 109–112.
    Springer, 2008.
  18. Khemais Saanouni, Houssem Badreddine, Muhammad Ajmal,
    advances in virtual metal forming including the ductile damage occurrence. Application to 3D sheet metal deep drawing.
    Journal of engineering materials and technology 130, 1–11.
    2008.
  19. Houssem Badreddine, Khemais Saanouni, Abdelwahab Dogui, Amen Gahbich,
    elastoplasticité anisotrope non normale en grandes deformations avec endommagement. Application à la mise en forme de tôles minces.
    Revue Europeenne de Mecanique Numérique 16(41826), 913–940.
    2007.
  20. Mourad Khelifa, Khémaïs Saanouni, Houssem Badreddine, Amen Gahbich, Abdelwahab Dogui,
    Plasticité anisotrope couplée à un endommagement ductile. Application au gonflement hydraulique de tôles minces..
    Revue Europeenne de Mecanique Numérique 15(41858), 891–908.
    2006.
  21. Mourad Khelifa, Houssem Badreddine, Nabil Belamri, Amen Gahbiche, Khémaïs Saanouni, Abel Cherouat, Abdel Dogui,
    Effect of anisotropic plastic flow on the ductile damage evolution in hydro bulging test of thin sheet metal.
    International journal of forming processes 8(-1), 271–289.
    2005.
  22. Khémaïs Saanouni, Nabil Belamri, Mourad Khelifa, Houssem Badreddine, Abel Cherouat,
    Finite anisotropic plastic flow with ductile damage for sheet metal forming simulation.
    Computational Fluids and Solids Mechanics 1, 611–614.
    2003.

Proceedings articles indexed in international databases

  1. Weijie Liu, Khemais Saanouni, Carl Labergère, Houssem Badreddine, Samuel Forest, Ping Hu,
    Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature.
    MATEC Web of Conferences 80(01002), 7.
    2016.
  2. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    MATEC Web of Conferences 80(01001).
    2016.
  3. Chuan ZHANG, Feng ZHU, Houssem BADREDDINE, Siyuan HE, Xiao-Lu GONG,
    Simulation of melting process of phase change materials in high mechanical property open-cell metal foams.
    International Conf. on Mech. of Complex Solids and Fluids (ICMCSF) 17-22 mai 2015, Lille, France.
    2015.
  4. Chuan ZHANG, Feng ZHU, Houssem BADREDDINE, Xiao-Lu GONG,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    International Conf. on Adv. Composite Mat. (ACM) 19-21 July, 2015 Shanghai, China.
    2015.
  5. Saber Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 Barcelona 3-5 September 2013, Spain.
    2013.
  6. Trong Dung Nguyen, Houssem Badreddine, Khemais Saanouni,
    ON ANISOTROPIC DAMAGE COUPLED WITH ELASTO-PLASTICITY AT FINITE STRAIN.
    ICDM - International Conference on Damage Mechanics, Belgrade, Serbia, June 2012, 4.
    2012.
  7. T. D. Nguyen, Houssem Badreddine, Khemais Saanouni,
    NON-ASSOCIATIVE FINITE STRAIN PLASTICITY COUPLED WITH ANISOTROPIC DUCTILE DAMAGE FOR METAL FORMING.
    11th Biennial Conference On Engineering Systems Design And Analysis ESDA2012 , Nantes, France, July 2012, 6.
    2012.
  8. M. Malekipour Gharbi, Carl Labergère, Houssem Badreddine, C. Soyarslan, A. Weinrich, M. Hermes, S. Chatti, H. Sulaiman, Khemais Saanouni, E. Tekkaya,
    Advanced experimental-numericla investigations of cold bending of high strength steels.
    International conference on technology of plasticity, dortmund, September 2011, 6.
    2011.
  9. Houssem Badreddine, Khemais Saanouni,
    3D vs plane stress formulations of anisotropic non normal plastic and damage models for sheet metal forming.
    ICF12: 12th International Conference on Fracture, Ottawa, Canada, Juillet 2009, 6.
    2009.
  10. Wajdi Rajhi, Khémaïs Saanouni, Houssem Badreddine, Carl Labergère,
    Simulation numérique de l¿endommagement dans quelques procédés de formage plastique d'un acier de hautes performances.
    COTUME¿2008: Congrès Tunisien de Mécanique , Hammamet, Tunisie, Mars 2008, 6.
    2008.
  11. Houssem Badreddine, Carl Labergère, Khémaïs Saanouni, Wajdi Rajhi, Alain Rassineux, Dominique Kircher,
    F.E. elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    ESAFORM 2008, Lyon, April 2008, 6.
    2008.
  12. Khémaïs Saanouni, Houssem Badreddine,
    3D vs plane stress formulations of anisotropic non normal plasticity with damage for sheet metal forming.
    IDDRG 2008, Olofström, Sweden, Juin 2008, 6.
    2008.
  13. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Prediction of damage in hydro bulging test using a non normal and non quadratic anisotropic plasticity formulation, , 19-21 March 2007.
    2nd World congress Design and Modelling of Mechanical System, Monastir, Tunisia, March 2007, 6.
    2007.
  14. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Non normal and non quadratic anisotropic plasticity coupled with ductile damage in sheet metal forming: Application to the hydro bulging test..
    10th ESAFORM conference on material forming, Zaragoza, Spain, April 2007, 6.
    2007.
  15. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Impact of a non associative plasticity on damage prediction in sheet metal forming, May 21-23, 2007.
    IDDRG¿2007, Gyõr, Hungary, May 2007, 6.
    2007.
  16. Khémaïs Saanouni, Houssem Badreddine,
    Damage prediction in sheet metal forming, 18-21 June, 2007.
    invited paper, NUMIFORM 2007,, Porto, Potugal, June 2007, 6.
    2007.
  17. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    New rotational kinematics in anisotropic elasto ¿ plasticity with damage 19-21 Jun 2006,.
    IDDRG conference , Porto, Portugal, June 2006, 6.
    2006.
  18. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Influence of anisotropic non normal plasticity on the isotropic ductile damage in sheet metal forming.
    ICAMEM conference 17-19 Dec 2006, , Hammamet-Tunisia, December 2006, 6.
    2006.
  19. Khémaïs Saanouni, Houssem Badreddine,
    Damage prediction in sheet metal forming. Theory, numerics and application.
    Keynote Lecture, IDDRG 2006, Porto, Portugal, June 2006, 6.
    2006.

Unindexed proceedings articles

  1. Zhenming Yue, Houssem Badreddine, Khemais Saanouni,
    Numerical prediction of incremental sheet forming based on ductile damage model with considering distortional hardening.
    NUMIFORM2016, July 4th - 6th 2016, Troyes, France.
    2016.
  2. Mohamed Ali Dhifallah, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Fatigue Life prediction methodology applied to 3D mechanical component.
    2th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  3. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes..
    , 12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  4. Zohra Sendi, Houssem Badreddine, Carl Labergere, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  5. Houssem Badreddine, Khemais Saanouni, Trong Dung Nguyen,
    The use of an advanced anisotropic damage model to the sheet metal forming simulations.
    The XII International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS2013, September 3-5, 2013, Barcelona, Spain, 6 pages.
    2013.
  6. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 , pp. 1066-1074, Barcelona 3-5 September 2013, Spain, 6 pages.
    2013.
  7. Trong Dung Nguyen, Houssem Badreddine, Khémais Saanouni,
    Plasticité anisotrope non-associée couplée à un endommagement anisotrope en transformations finies.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  8. Carl Labergère, Houssem Badreddine, Wajdi Rajhi, Khémaïs Saanouni, Alain Rassineux,
    Caractérisation numérique de l'endommagement ductile d¿aciers à hautes performances. Essais d¿expansion et de pliage.
    CFM'2009:XIXème congrès Français de Mécanique, Marseille, Août 2009, 6.
    2009.
  9. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui, Mourad Khelifa, Amen Gahbich,
    Formulation en GD d'un modèle élastoplastique couplé à l'endommagement, , Troyes, 29 août, 2 Septembre, 2005.
    CFM2005, 17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.

Conference talks with no proceedings

  1. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling and numerical simulation of ductile damage in cold bulk metal forming.
    46th ICFG Plenary Meeting, Paris September 15th to 18th, 2013.
    2013.
  2. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    On the modelling of initial and induced anisotropies for the accurate numerical simulation of sheet and bulk metal forming processes.
    FTF'2009: Forming Technology Forum, Zurich, Suisserland, May 2009.
    2009.
  3. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling in metal forming including the ductile damage occurrence.
    PLASTICITY 2009, Saint Thomas, USA, January 2009.
    2009.

Conference posters

  1. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni, Manuel François, Virginie Lacote,
    Experimental Characterization and Comparison of Plane and Corrugated Aluminium Sheets Behavior.
    ESAFORM 2013, Aveiro University, 22-24 avril 2013, Portugal.
    2013.

Scientific books (or chapters)

  1. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.
  2. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine, ,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.