Peer-reviewed journal articles indexed in international databases

  1. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    High Strength Nanocrystallized Multilayered Structure Obtained By SMAT And Co-rolling.
    Materials science forum 614, 249–254.
    2009.
  2. Bruno Guelorget, Manuel François, Jian Lu,
    Microindentation as a local damage measurement technique.
    Materials letters 61, 34–36.
    2007.
  3. Bruno Guelorget, Manuel François, Cheng Liu, Jian Lu,
    Extracting the plastic properties of metal materials from microindentation tests: experimental comparison of recently published methods.
    Journal of materials research 22(6), 1512–1519.
    2007.
  4. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Enhanced mechanical behaviour of a nanostructured stainless steel and its thermal stability.
    Materials science and engineering 524-525, 281–288.
    2007.
  5. Bruno Guelorget, Manuel François, Christian Vial-Edwards, Guillaume Montay, Laurent Daniel, Jian Lu,
    Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset.
    Materials Science and Engineering A 415(1-2), 234–241.
    2006.
  6. Guillaume Montay, Akim Cherouat, Jian Lu,
    Residual stress analysis in crankshaft using the hole drilling method.
    Materials Science Forum 524-525, 537–542.
    2006.
  7. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment.
    Scripta materialia 54, 1949–1954.
    2006.
  8. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Effect of surface nanocrystallization on tribological properties of stainless steel.
    Materials science forum 524-525, 717–722.
    2006.
  9. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    Material Science Forum 524, 813–817.
    2006.
  10. Guillaume Montay, Jacek Bulhak, Yves Surrel, Alain Vautrin, Jian Lu,
    Use of full field of strains found by grating shearography to determine residual stress.
    Journal of Strain Analysis for Engineering Design 40(7), 621–630.
    2005.
  11. Céline Pile, Manuel François, Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Modelling of ultrasonic shot-peening process.
    Materials science forum 490, 67–72.
    2005.
  12. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of residual stresses on the mechanical behavior of composite laminate materials.
    Advanced Composites Materials 14(4), 319–342.
    2005.
  13. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Generation of nanostructures on 316L stainless steel and its effect on mechanical behavior.
    Materials science forum 490, 625–630.
    2005.
  14. Céline Pilé, Delphine Retraint, Manuel François, Jian Lu,
    Effect of very high stress levels on the fatigue life of a TiAl based alloy.
    Materials science forum 490, 418–423.
    2005.
  15. Guillaume Montay, Olivier Sicot, X.-L. Gong, Akim Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Materials Science Forum 490-491, 533–538.
    2005.
  16. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Material Science Forum 490, 533–539.
    2005.
  17. Jian Luo, Guillaume Montay, Jian Lu,
    An advanced residual stress determination for 3D cylinder structure.
    Materials Science Forum 490-491, 62–66.
    2005.
  18. Guillaume Montay, Akim Cherouat, Amir Nussair, Jian Lu,
    Residual stresses in coating technology.
    Journal of Materials Science and Technology 20(SUPPL.), 81–84.
    2004.
  19. Xiao-Lu Gong, Y. Liu, S.-Y. He, Jian Lu,
    Manufacturing and low-velocity impact response of a new composite material: Metal Porous Polymer Composite (MPPC).
    Journal of Materials Science and Technology 20, 65–68.
    2004.
  20. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the experimental parameters on the determination of residual stresses by using the incremental hold-drilling method.
    Composite Sciences and Technology 64, 171–180.
    2004.
  21. Guillaume Montay, Akim Cherouat, Claude Garnier, Jian Lu,
    Determining Residual Stress in Spherical Components: A New Application of the Hole-Drilling Method.
    Journal of Testing and Evaluation 32(1), 73–79.
    2004.
  22. Guillaume Montay, Abel Cherouat, Claude Garnier, Jian Lu,
    Determining residual stress in spherical component: a new application of the hole drilling method.
    Journal of testing and evaluation 32(1), 73–79.
    2004.
  23. Thierry Roland, Min Ya, Delphine Retraint, Ke Lu, Jian Lu,
    A new multilayered nanostructured composite material produced by assembling SMA-treated thin plates.
    Journal of materials science and technology 20, 55–58.
    2004.
  24. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    Nano-scratching process and fracture mechanism of amorphous carbon fims.
    Wear 254, 1032–1036.
    2003.
  25. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of residual stress in composite laminates using the incremental hole-drilling method.
    Journal of Composite Materials 37(9), 831–844.
    2003.
  26. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Study of residual stresses in composite laminates by the finite element method and experimental analysis.
    Journal of Material Science Forum 404-407, 925–934.
    2002.
  27. Akim Cherouat, Guillaume Montay, Jian Lu,
    Study of residual stresses in complex parts by experimental and numerical methods.
    Materials Science Forum 404-407, 251–256.
    2002.
  28. Delphine Retraint, Claude Garnier, Bruno Guelorget, Jian Lu,
    Improvement of the fatigue behaviour of an automotive part using a new mechanical treatment.
    Materials science forum 404(7), 463–468.
    2002.
  29. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Generation of extremely hight stress levels in a TiAl based alloy.
    Materials science forum 404, 89–94.
    2002.
  30. Guillaume Montay, Akim Cherouat, Jian Lu, Luc Bianchi, Nicolas Baradel,
    Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi layer materials : infLuence of temperature and substrate on ZrO2-Y2-O3 8 wt.% coatings.
    Journal of Surface and Coating Technology 155(2-3-4), 152–160.
    2002.
  31. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Influence of the residual stresses on the mechanical behaviour of advanced composite parts.
    Journal of Neutron Research 9(-1), 319–330.
    2001.
  32. Zhu Wu, Guillaume Montay, Jian Lu,
    High sensitivity moiré interferometry and incremental hole-drilling method for residual stress measurement [Mesure des contraintes résiduelles par la technique de l'interférométrie de moiré de trés grande sensibilité et la méthode du perçage incréental].
    Comptes Rendus de l'Academie de Sciences - Serie IIb: Mecanique 329(8), 585–593.
    2001.
  33. Yong Han, Kewei Xu, Guillaume Montay, Jian Lu,
    Evaluation of nanostructured carbonated hydroxyapatite coatings formed by a hybrid process of plasma spraying and hydrothermal synthesis.
    Journal of Biomedical Materials Research 55(4), 596–602.
    2001.
  34. Delphine Retraint, Jian Lu,
    Study of residual stress distribution by the combination of three techniques in an aluminium based MMC.
    Materials science forum 347(3), 498–503.
    2000.
  35. Shabnam Rasouli Yazdi, Delphine Retraint, Jian Lu,
    Experimental Study of Residual Stress Distribution in Quenched Parts by the Incremental Large Hole Drilling Method and by the Neutron Diffraction Method.
    Journal of testing and evaluation 28(4), 282–289.
    2000.
  36. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    Annales des composites 1, 65–69.
    1999.
  37. Shabnam Rasouli Yazdi, Delphine Retraint, Jian Lu,
    Study of through thickness residual stress by numerical end experimental techniques.
    Journal of strain analysis for engineering design 33(6), 449–458.
    1998.
  38. Jian Lu, Delphine Retraint,
    A review of recent developments and applications in the field of X-ray diffraction for residual stress study.
    Journal of strain analysis for engineering design 33(2), 127–136.
    1998.

Unindexed peer-reviewed journal articles

  1. Abel Cherouat, Guillaume Montay, Jian Lu,
    Study of residual stresses in complex parts by experimental and numerical methods.
    Journal of Material Science Forum -1, 251–256.
    2002.
  2. Guillaume Montay, Abel Cherouat, Jian Lu, Luc Bianchi, N Baradel,
    Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi layer materials : influence of temperature and substrate on ZrO2-Y2-O3 8 wt.% coatings.
    Journal of Surface and Coatings Technology 155(-1), 152–160.
    2002.
  3. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    Analysis of Nano-scratch behavior of diamond like carbon films.
    Surface and Coatings Technology 154(-1), 232–236.
    2002.
  4. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget, Hua Chen,
    Nano-scratch and fretting wear study of DLC coatings for biomedical application.
    Diamond and related materials 10(8), 1448–1456.
    2001.
  5. Guillaume Montay, Akim Cherouat, Jian Lu,
    Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy.
    Journal of Neutron Research 9(2-4), 337–344.
    2001.

Proceedings articles indexed in international databases

  1. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    HIGH STRENGTH NANOCRYSTALLIZED MULTILAYERED STRUCTURE OBTAINED BY SMAT AND CO-ROLLING.
    The 6th International Forum on Advanced Material Science and Technology (IFAMST , HONG KONG, June 2008.
    2008.
  2. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    COMBINATION OF THE SMA-TREATMENT AND THE CO-ROLLING PROCESS FOR THE PRODUCTION OF A NANOSTRUCTURED COMPOSITE STRUCTURE.
    The Tenth International Conference of Shot Peening (ICSP 10), TOKYO, September 2008, 6.
    2008.
  3. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Surface property modifications of steel induced by SMAT.
    The 21st International Conference on Surface Modification Technologies (SMT21), Paris, Septembre 2007, 6.
    2007.
  4. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    21st International Conference on Surface Modification Technologies (SMT21), PARIS, September 2007, 9.
    2007.
  5. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    GLOBAL BEHAVIOR OF A NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    International Conference on Experimental Mechanics 13 (ICEM13), ALEXANDROUPOLIS, July 2007, 10.
    2007.
  6. Bruno Guelorget, Manuel François, Jian Lu,
    Evaluation of damage and plastic properties by microindentation and inverse method.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  7. Bruno Guelorget, Manuel François, Guillaume Montay, Laurent Daniel, Jian Lu,
    Uncertainty evaluation of strain rate measurement by ESPI during a tensile test.
    Speckle 06, Nimes, September 2006, 6.
    2006.
  8. Guillaume Montay, Abel Cherouat, Jian Lu,
    Residual stress analysis in crankshaft using the hole drilling method.
    7th European Conference on Residual Stresses, Berlin (Allemagne), September 2006.
    2006.
  9. Jian Lu, Pascal Lafon, Delphine Retraint, Emmanuelle Rouhaud,
    Integration of the Residual Stress in the Engineering Design of Mechanical Components and Structure using the Prestress Engineering Approach.
    16th CIRP Design Seminar, Alberta, July 2006, 10.
    2006.
  10. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    7th European Conference on Residual Stresses, Berlin (Allemagne), Septembre 2006.
    2006.
  11. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    7th European Conference on Residual Stresses, Berlin, Allemagne, 13-15 sep. 2006,, 6.
    2006.
  12. Claude Garnier, Jian Lu, Alain Milley, Guillaume Montay, Delphine Retraint,
    Presentation of a general approach for taking into account the residual stress in the design of automotive components.
    SAE Congress, Detroit, April 2005, 539–546.
    2005.
  13. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Fatigue life improvement through nanostructuring of stainless steel.
    9th International Conference on Shot-Peening (ICSP9), Marne-La-Vallée, August 2005, 6.
    2005.
  14. Xiao-Lu Gong, Yu Liu, Siyuan He, Jian Lu,
    Manufacturing and low-velocity impact response of a new composite material : Metal Porous Polymer Composite (MPPC)”.
    4th Int. Forum on Advanced Material Science and Technology, France, Troyes 7-9 juillet. 2004, 6.
    2004.
  15. Siyuan He, Xiao-Lu Gong, Jian Lu, Y. Liu,
    Impact behavior of porous aluminum alloy under low velocity.
    Fifth Int. Symposium on Impact Eng. (ISIE 5), Cambridge UK 11-15 juillet 2004, 9.
    2004.
  16. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th International conference on residual stress, Xian (China) June 2004.
    2004.
  17. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th Inter. Conf. On Residual Stresses, Xi’An, Chine, Juin 2004 CD, 6.
    2004.
  18. Guillaume Montay, Abel Cherouat, None Nussair, Jian Lu,
    Caractérisation et modélisation de l'aptitude à la déformation des structures souples.
    4ème Congrès National en Mécanique expérimentale des matériaux et des structures, Tarbes, Janvier 2004.
    2004.
  19. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the residual stress on the mechanical behaviour of composite laminates during monotonous tensile and torque loading.
    Euromech 453, Saint-Etienne, December 2003.
    2003.
  20. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the residual stress on the mechanical behavior of composite laminates during monotonous tensile and torque loading.
    Euromech 453, Saint-Etienne, France, décembre 2003, CD, 6.
    2003.
  21. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Studies of residual stresses in composite laminates by the finite element method.
    6th Inter. Conf. On Residual Stresses, Coimbra, (Portugal), July 2002, 925–934.
    2002.
  22. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Studies of residual stresses in composite laminates by the finite element method.
    6th European Conference on Residual Stresses, Coimbra, Portugal, , juillet 2002, 925–934.
    2002.
  23. Abel Cherouat, Guillaume Montay, Jian Lu,
    Studies of residual stresses in complex parts by the finite element method.
    6th European Conference on Residual stresses, Lisbone (Portugal), July 2002.
    2002.
  24. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Simulation of residual stresses in composite laminates by the finite element method 6th European Conference on residual stresses.
    6th European Conference on Residual stresses, Lisbone (Portugal), July 2002.
    2002.
  25. Katsuji Tosha, Jian Lu, Delphine Retraint, Bruno Guelorget, Kisuke Iida,
    Influence of pre-annealing on surface and surface layer characteristics produced by shot peening.
    The 8th International Conference on Shot Peening (ICSP-8), Garmisch-Partenkirch, September 2002, 173–180.
    2002.
  26. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Effect of residual stresses on torque behaviors of composite laminate.
    13th International Conference of Composite Materials(ICCM13), Pékin (Chine).ISBN 7-9000-75-4, JUNE 2001, 1524.
    2001.
  27. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Influence of the residual stresses on the mechanical behaviour of advanced composite parts.
    International Conference Stress Evalutaion, Meca-sens 2000, Reims (France), DECEMBER 2000, 1.
    2000.
  28. Xiao-Lu Gong, Abel Cherouat, Olivier Sicot, Jian Lu,
    Determination of residual stresses in the case of composite laminate.
    6th International Conference on Residual Stresses, Oxford (United Kingdom), JULY 2000, 6.
    2000.
  29. Xiao-Lu Gong, Abel Cherouat, Xiao-Jing Gong, Jian Lu,
    Residual Stress distribution and its influence on the mechanical behaviour of composite laminates.
    12th International Conference of Composite Materials( ICCM12), Paris (France), JUILLET 1999, 1160.
    1999.
  30. Xiao-Lu Gong, Abel Cherouat, Xiao-Jing Gong, Jian Lu,
    Residual stress distribution and its influence on the mechanical behaviour of composite laminates.
    International Conference of Composite Materials, Paris (France), JULY 1999, 1160.
    1999.
  31. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Modèle numérique pour la caractérisation des contraintes résiduelles dans les matériaux multicouches.
    Congrès de Mécanique SMSM 4, Mohammadia (Maroc), AVRIL 1999, 1.
    1999.
  32. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Modèle numérique pour la caractérisation des contraintes résiduelles dans les matériaux multicouches.
    SMSM'4, Congrès de Mécaniques, Mohammadia (Maroc), AVRIL 1999, 1.
    1999.

Unindexed proceedings articles

  1. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    Comportement mécanique d'une structure multicouche obtenue par co-laminage de tôles nanostructurées par SMAT.
    18ème Congrès Français de Mécanique (CFM2007) , GRENOBLE, Août 2007, 6.
    2007.
  2. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Propriétés mécaniques d'un acier inoxydable nanostructuré.
    17ème congrès français de mécanique (CFM), Troyes, Septembre 2005, 6.
    2005.
  3. Bruno Guelorget, Manuel François, C Vial, Laurent Daniel, Jian Lu,
    Mesure de vitesse de déformation par interférométrie électronique de granularité laser (ESPI) sur une tôle de cuivre mi-dur en traction : un nouveau regard sur l'amorçage de la localisation.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  4. Xiao-Lu Gong, Sy. He, Y. Liu, Olivier Sicot, Jian Lu,
    Elaboration et étude du comportement en compression d’un nouveau matériau composite :Métal Poreux Polymère Composite (MPPC).
    JNC 14, Compiègne, mars 2005, CD, 8.
    2005.
  5. Xiao-Lu Gong, Sy. He, Jian Lu, Y. Liu,
    Proposition d’un nouveau type de matériau composite : Mousse Métallique-Polymère Composite.
    Journée d’études techniques JET-3 2004, Marrakech Maroc 14-16 avril 2004, 5.
    2004.
  6. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Optimisation de la méthode du trou incrémental pour la mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    16ème Congrès Français de Mécanique, 1-5 sep 2003 Nice, CD ID.129, 6.
    2003.
  7. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles par la méthode du trou incrémental.
    13ème Journées Nationales des Composites, Strasbourg, Mars 2003.
    2003.
  8. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles par la méthode du trou incrémental.
    JNC13, Strasbourg, mars 2003, 1, 63–71.
    2003.
  9. Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles dans les matériaux composites stratifiés.
    13ème Journées Nationales des Composites, Strasbourg, Mars 2003.
    2003.
  10. Guillaume Montay, Abel Cherouat, Jian Lu,
    Influence des contraintes résiduelles dans des dépôts de carbure de tungstène.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  11. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Application de la méthode de la flèche à la détermination des contraintes résiduelles dans les composites stratifiés.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  12. Abel Cherouat, Guillaume Montay, Jian Lu,
    Méthode numérique et expérimentale pour la détermination des contraintes résiduelles dans les dépôts.
    Matériaux 2002 de la Conception à la Mise en œuvre, Tours (France), octobre 2002.
    2002.
  13. Guillaume Montay, Abel Cherouat, Jian Lu,
    Influence des contraintes résiduelles dans les dépôts de carbure de tungstène : influence de la géométrie et du mode de projection.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux Troyes (France), MARS 2002.
    2002.
  14. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Détermination par la méthode du trou incrémental des contraintes résiduelles dans un alliage TiAl grenaillé par ultrasons.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux, Troyes (France), MARS 2002, 6.
    2002.
  15. Guillaume Montay, Abel Cherouat, Jian Lu,
    The hole drilling technique applied on complex shapes.
    Annual Conference on Experimental and Applied Mechanics, Portland (Oregon, USA), JUNE 2001, 3.
    2001.
  16. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    Nano-scratching process and fracture mechanism of amorphous carbon films.
    3rd International Colloquium-Micro-tribology, , 2001.
    2001.
  17. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    In vitro assessment of mechanical properties of diamond like carbon films for biomedical application.
    1st International Conference on Biomaterials, China,.
    2001.
  18. Jian Lu, Guillaume Montay, Abel Cherouat, H Bianchi, N Baradel,
    Role of substrate nature and the spraying temperature on the residual stress distribution in plasma sprayed zirconia coating.
    6th International Conference on Residual Stresses, Oxford (United Kingdom), JULY 2000.
    2000.
  19. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu, P Olivier,
    Nouvelle méthode de mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    12ème Journée Nationale des Composites, Paris (France), NOVEMBRE 2000, 9.
    2000.
  20. Guillaume Montay, Abel Cherouat, Jian Lu, H Bianchi, N Baradel,
    Modélisation des contraintes résiduelles introduites dans les matériaux multicouches.
    12e Journée Nationale des Composites, Paris (France), NOVEMBRE 2000.
    2000.
  21. Guillaume Montay, Abel Cherouat, Jian Lu,
    Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy.
    International Conference Stress Evaluation, MECA-SENS 2000, Reims (France), DECEMBER 2000, 1.
    2000.
  22. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d’un composite stratifié.
    AMAC, JST Composite, Compiègne, novembre 1999, 6.
    1999.
  23. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    AMAC, JST Composite, Compiègne (France), NOVEMBRE 1999.
    1999.
  24. Zhu Wu, Xiao-Lu Gong, Jian Lu,
    Nouvelle méthodologie de mesure de contraintes résiduelles par la technique de Moire interférométrie et la méthode du trou incrémental.
    JNC'11, ARCACHON (France), NOVEMBRE 1998 -1, 665–674.
    1998.
  25. David Deslaef, Emmanuelle Rouhaud, Jian Lu,
    Finite Element Modeling of Shot-Peening Processes.
    SEM'98, HOUSTON (Texas, USA), JUNE 1998, 3.
    1998.
  26. Delphine Retraint, Jian Lu,
    Evaluation of residual stresses in an ultrasonic shot-peened aluminium composite.
    SEM'98, HOUSTON (Texas), JUNE 1998, 1.
    1998.
  27. Alain Milley, Emmanuelle Rouhaud, Jian Lu,
    Prediction of Residual Stress Relaxation in Three-dimensional Structures under Tensil and Torsional Loading.
    ICRS 5, LINKOPING (Sweden), JUNE 1997, 5.
    1997.
  28. Emmanuelle Rouhaud, Alain Milley, Jian Lu,
    Introduction of Residual Stress Fields in Finite Element Three-Dimensional Structures.
    ICRS 5, LINKOPING (Sweden), JUNE 1997, 5.
    1997.

Conference talks with no proceedings

  1. Delphine Retraint, Claude Garnier, Bruno Guelorget, Jian Lu,
    Study of the influence of ultrasonic shot peening on the fatigue behaviour of a 41CR4 steel.
    Integrity Reliability Failure, Porto, June 1999, 112.
    1999.

Scientific books (or chapters)

  1. Delphine Retraint, Céline Pile, Claude Garnier, Jian Lu,
    ultrasonic shot peening.
    Handbook on residual stress, 146–159.
    SEM, USA, 2005.
  2. Emmanuelle Rouhaud, David Deslaef, Jian Lu, Jean-Louis Chaboche,
    Modeling of Residual Stress, Shot Peening.
    Handbook on residual stress, 116–148.
    SEM, USA, 2005.
  3. Jian Lu, Caroline Richard, M Mellali, Pierre Fauchais, Gerard Beranger, Michel Jeandin,
    Optimisation of the residual stresses in thermal spraying coating materials.
    Surface modification technologies VIII, 817–823.
    IOM COMMUNICATIONS L, London, 1995.

Other productions

  1. Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Metal Finishing News.
    Metal Finishing News 4, 26–29.
    2003.