Peer-reviewed journal articles indexed in international databases

  1. Houssem Badreddine, Zhenming Yue, Khemais Saanouni,
    Modeling of the induced plastic anisotropy fully coupled with ductile damage under finite strain.
    International Journal of Solids and Structure 108, 49–62.
    ELSEVIER, 2017.
  2. Evangelia Diamantopoulou, Weje Liu, Carl Labergère, Houssem Badreddine, Khemais Saanouni, P. Hu,
    Micromorphic constitutive equations with damage applied to metal forming.
    International Journal of Damage Mechanics DOI: 10.1177/1056789516684650(DOI: 10.1177/1056789516684650).
    SAGE, 2017.
  3. Zhenming Yue, Houssem Badreddine, Khemais Saanouni, E.S. Perdahcioglu,
    Experimental and numerical studies of AL7020 formability under orthogonal loading paths with considering yield surface distortion.
    International Journal of Mechanical Sciences 123, 151–161.
    ELSEVIER, 2017.
  4. Houssem Badreddine, Khemais Saanouni,
    On the full coupling of plastic anisotropy and anisotropic ductile damage under finite strains.
    International Journal of Damage (In press).
    Sage, 2016.
  5. Zhenming Yue, Houssem Badreddine, Khemais Saanouni, X.C. Zhuang, J. Gao,
    Numerical simulation of sheet metal blanking based on fully coupled elastoplasticity-damage constitutive equations accounting for yield surface distortion-induced anisotropy.
    International Journal of Damage Mechanics DOI: 10.1177/1056789516673886.
    SAGE, 2016.
  6. Evangelia Diamantopoulou, Carl Labergere, Khemais Saanouni,
    Non local damage based on micromorphic formulation.
    19th ESAFORM Conference, AIP Conference Proceedings, 27-29 April 2016, Nantes 1769.
    2016.
  7. Houssem Badreddine, Carl Labergère, Khemais Saanouni,
    Ductile damage prediction in sheet and bulk metal forming.
    Comptes Rendus Mécanique 344, 296–318.
    ELSEVIER, 2016.
  8. Carl Labergère, Khemais Saanouni, Zhidan Sun, Mohamed Ali Dhifallah, Yisa Li, Jean-louis Duval,
    Prediction of low cycle fatigue life using cycles jumping integration scheme.
    Applied Mechanics and Materials 784, 308–316.
    Trans Tech Publications, 2015.
  9. Zhenming Yue, Houssem Badreddine, T. Dang, Khemais Saanouni, Erman Tekkaya,
    Formability prediction of AL7020 with experimental and numerical failure criteria.
    Journal of Materials Processing Technology 218, 80 – 88.
    ELSEVIER, 2015.
  10. Sabeur Msolli, Houssem Badreddine, Carl Labergere, Marion Martiny, Guillaume Robin, Mohamed Jrad, Khemais Saanouni, François Choquart,
    Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets.
    International Journal of Mechanical Sciences 99, 262–273.
    ELSEVIER, 2015.
  11. Houssem Badreddine, Khemais Saanouni, Trong Dung Nguyen,
    Damage anisotropy and its effect on the plastic anisotropy evolution under finite strains.
    International Journal of Solids and Structures 63, 11–31.
    ELSEVIER, 2015.
  12. Houssem Badreddine, Khemais Saanouni,
    Advanced Anisotropic Damage Model Fully Coupled with Anisotropic Plasticity.
    Applied Mechanics and Materials, vol 784, “Damage Mechanics: Theory, Computation and Practice".
    Trans Tech publications Inc, 2015.
  13. Zhenming Yue, C. Soyarslan, Houssem Badreddine, Khemais Saanouni, Erman Tekkaya,
    . Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental–numerical methodology with various triaxialities.
    International Journal of Damage Mechanics 24(5), 683–710.
    Sage, 2015.
  14. Carl Labergère, Alain Rassineux, Khemais Saanouni,
    Numerical simulation of continuous damage and fracture in metal-forming processes with 2D mesh adaptive methodology.
    Finite Elements in Analysis & Design 82, 46–61.
    Elsevier, 2014.
  15. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Modelling and numerical simulation of thick sheet double slitting process using continuum damage mechanics.
    International Journal of Damage Mechanics 23, 1150–1167.
    SAGE, 2014.
  16. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Numerical simulation of thick sheet slitting processes: Modelling using continuum damage mechanics.
    AIP Conference Proceedings 1532, 339–344.
    2013.
  17. Khemais Saanouni, Mohamed Hamed,
    Micromorphic approach of finite gradient-elastoplasticity fully coupled with ductile damage. Formulation and computational aspects.
    International Journal of Solids and Structures 50, 2289–2309.
    Elsevier, 2013.
  18. Zhenming Yue, Celal Soyarslan, Houssem Badreddine, Khemais Saanouni, Erman Takkaya,
    Inverse identification of CDM model parameters for DP1000 steel sheets using a hybrid experimental-numerical methodology spanning various triaxiality ratios.
    Key Engineering materials 554-557, 2103–2110.
    Scientific.Net, 2013.
  19. Mazen Issa, Carl Labergère, Khemais Saanouni, Alain Rassineux,
    Numerical prediction of thermomechanical field localization in orthogonal cutting.
    CIRP Journal of Manufacturing Science and Technology 5, 175–195.
    2012.
  20. Madjid Almansba, Khemais Saanouni, Naceur Hannachi,
    A simple damage-gradient enhanced elastoplastic formulation and its numerical implementation.
    Mechanics and Industry 13(2), 97–110.
    2012.
  21. Benoit Panicaud, Khemais Saanouni, Andrzej Baczmanski, Manuel François, Lionel Cauvin, Lea Lejoncour,
    Theoretical modelling of ductile damage in Duplex stainless steels- Comparison between two micro-mechanical elastoplastic approaches..
    Computational Materials Science 50, 1908–1916.
    2011.
  22. Mazen Issa, Khemais Saanouni, Carl Labergère, Alain Rassineux,
    Prediction of serrated chip formation in orthogonal metal cutting by advanced adaptive 2D numerical methodology.
    International Journal of Machining and Machinability of Materials 9(3/4), 295–315.
    2011.
  23. Thomas Paris, Khemais Saanouni,
    Numerical integration of elasto-viscoplastic-damage constitutive equations under plane stress condition.
    European Journal of Computational Mechanics 20(5/6), 341–368.
    2011.
  24. Benoît Panicaud, Ludovic Cauvin, Léa Le Joncour, Andrzej Baczmanski, Khémaïs Saanouni, Manuel François,
    Analysis of ductile damage – Comparison between micromechanical models an neutron diffraction experiments.
    Materials Science Forum 681, 91–96.
    Trans Tech Publications, 2011.
  25. Denis Sornin, Khemais Saanouni,
    About elastoplastic non-local formulations with damage gradients.
    International Journal of Damage Mechanics 20(6), 845–875.
    Sage, 2011.
  26. Khemais Saanouni, Philippe Lestriez, Carl Labergère,
    2D adaptive simulations in finite thermo-elasto-viscoplasticity with ductile damage : Application to orthogonal metal cutting by chip formation and breaking.
    International Journal of Damage Mechanics 20(1), 23–61.
    Sage, 2011.
  27. Carl Labergère, Alain Rassineux, Khemais Saanouni,
    2D adaptive mesh methodology for the simulation of metal forming processes with damage.
    International Journal of Materials Forming 4(3), 317–328.
    Springer, 2011.
  28. Khemais Saanouni, Philippe Lestriez, Carl Labergère,
    2D adaptive FE simulations in finite thermo-elasto-viscoplasticity with ductile damage: Application to orthogonal metal cutting by chip formation and breaking.
    International Journal of Damage Machanics 20, 23–61.
    2011.
  29. Houssem Badreddine, Khemais Saanouni, Abdel Dogui,
    On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming.
    International journal of plasticity 26, 1541–1575.
    2010.
  30. N. Hfaiedh, Khemais Saanouni, Manuel François, Arjen Roos,
    Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials.
    Procedia Engineering 1(1), 229–232.
    2009.
  31. Houssem Badreddine, Carl Labergere, Khemais Saanouni, Wajdi Rajhi, Alain Rassineux, Dominic Kircher,
    elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    Int. J. of Metal Forming 1, 109–112.
    Springer, 2008.
  32. Khemais Saanouni, Houssem Badreddine, Muhammad Ajmal,
    advances in virtual metal forming including the ductile damage occurrence. Application to 3D sheet metal deep drawing.
    Journal of engineering materials and technology 130, 1–11.
    2008.
  33. Houssem Badreddine, Khemais Saanouni, Abdelwahab Dogui, Amen Gahbich,
    elastoplasticité anisotrope non normale en grandes deformations avec endommagement. Application à la mise en forme de tôles minces.
    Revue Europeenne de Mecanique Numérique 16(41826), 913–940.
    2007.
  34. Abel Cherouat, Nabil Belamri, Khémais Saanouni, Philippe Autesserre,
    Residual stresses in 3D sheet metal guillotining using a coupled finite elastoplastic damage model.
    Materials science forum -1, 89–94.
    2006.
  35. Mourad Khelifa, Khémaïs Saanouni, Houssem Badreddine, Amen Gahbich, Abdelwahab Dogui,
    Plasticité anisotrope couplée à un endommagement ductile. Application au gonflement hydraulique de tôles minces..
    Revue Europeenne de Mecanique Numérique 15(41858), 891–908.
    2006.
  36. Abel Cherouat, Houman Borouchaki, Khémaïs Saanouni, Parick Laug,
    Numerical Methodology for Metal Forming Processes Using Elastoplastic Model with Damage Occurrence.
    Journal of materials science & technology 22(2), 279–283.
    2006.
  37. Jean-François Mariage, Khémaïs Saanouni, Philippe Lestriez, Abel Cherouat,
    Virtual metal forming with damage occurrence using adaptive remeshing.
    International journal of forming processes 8(-1), 291–310.
    2005.
  38. Abel Cherouat, Khémaïs Saanouni, Houman Borouchaki, Patrick Laug,
    Numerical simulation of an hexnut forming process with damage effect.
    International journal of forming processes 8(-1), 311–332.
    2005.
  39. Mourad Khelifa, Houssem Badreddine, Nabil Belamri, Amen Gahbiche, Khémaïs Saanouni, Abel Cherouat, Abdel Dogui,
    Effect of anisotropic plastic flow on the ductile damage evolution in hydro bulging test of thin sheet metal.
    International journal of forming processes 8(-1), 271–289.
    2005.
  40. Houman Borouchaki, Patrick Laug, Abel Cherouat, Khémaïs Saanouni,
    Adaptive remeshing in large plastic deformations.
    International journal for numerical methods in engineering 63, 1–36.
    2005.
  41. Philippe Lestriez, Khémaïs Saanouni, Jean-François Mariage, Abel Cherouat,
    Numerical prediction of damage in metal forming process including thermal effects.
    International journal of damage mechanics 13(1), 59–80.
    2004.
  42. Khémaïs Saanouni, Jean-François Mariage, Abel Cherouat,
    Numerical prediction of central bursting in axisymmetric cold extrusion by continuum damage mechanics.
    Computers & structures 82(27), 2309–2332.
    2004.
  43. Abel Cherouat, Yq Guo, Khémaïs Saanouni, Ym Li, K Debray, G Loppin,
    Incremental versus inverse numerical approaches for ductile damage prediction in sheet metal forming.
    International journal of forming processes 7(-1), 2309–2332.
    2004.
  44. Abel Cherouat, Khémaïs Saanouni,
    Numerical simulation of sheet metal blanking process using a coupled finite elastoplastic damage modelling.
    International Journal of Forming Processes 6(1), 6107–32.
    2003.
  45. Khémaïs Saanouni, Nabil Belamri, Mourad Khelifa, Houssem Badreddine, Abel Cherouat,
    Finite anisotropic plastic flow with ductile damage for sheet metal forming simulation.
    Computational Fluids and Solids Mechanics 1, 611–614.
    2003.
  46. Houman Borouchaki, Abel Cherouat, Khémaïs Saanouni, Patrick Laug,
    Remaillage en grande déformations. Application à la mise en forme de structures 2 D.
    Revue européenne des éléments finis 11(1), 57–79.
    2002.
  47. Abel Cherouat, Khémaïs Saanouni, Y Hammi,
    Improvment of forming process of a 3 D complex part with respect to damage occurence.
    International journal of mechanical sciences 44, 2427–2446.
    2002.
  48. Houman Borouchaki, Abel Cherouat, Patrick Laug, Khémaïs Saanouni,
    Adaptive remeshing for ductile fracture prediction in metal forming.
    Comptes Rendus de l'Académie des Sciences.Série II B, Mécanique,physique,astronomie. 330, 709–716.
    2002.

Unindexed peer-reviewed journal articles

  1. Mourad Khelifa, Khemais Saanouni, Abel Cherouat,
    Prévision de l'endommagement ductile. Application à l'emboutissage de tôles minces.
    Mécanique industrielle et matériaux 7, 465–473.
    2006.
  2. Philippe Lestriez, Khémaïs Saanouni, Abel Cherouat,
    Simulation numérique de la coupe orthogonale par couplage thermique comportement-endommagement en transformations finies.
    Mécanique industrielle et matériaux 6(3), 297–307.
    2005.
  3. Y.Q Guo, Khémaïs Saanouni, Abel Cherouat, Y.M Li, G Loppin, K Debray,
    Two methodologies for the simulation of ductile damage in sheet metal forming processes.
    Journal of Plasticity Engineering 9(4), 47–55.
    2002.
  4. Philippe Lestriez, Abel Cherouat, Jean-François Mariage, Khémaïs Saanouni,
    Simulation numérique du couplage thermomécanique endommagement ductile application a la mise en forme.
    Journal de physique IV 12, 353–360.
    2002.
  5. J.F Mariage, Khémaïs Saanouni, J.F Lestriez, Abel Cherouat,
    Numerical Simulation of ductile damage in metal forming processes : part II application.
    International journal of forming processes 5, 377–390.
    2002.
  6. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Numerical Simulation of ductile damage in metal forming processes : part I a simple predictive model.
    International journal of forming processes 5(-1), 363–376.
    2002.
  7. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Numerical aspects of finite elastoplasticity with damage for metal forming.
    European Journal of Finite Elements 10(-1), 327–351.
    2001.

Invited conference talks

  1. Khemais Saanouni,
    Ductile damage prediction in metal forming processes. Advanced modelling and numerical simulation.
    11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2013), IMR Conference Hall, Shenyang, China, July 6-10.
    2013.
  2. Khemais Saanouni, Mohamed Hamed,
    Advanced micromorphic elatoplastic constitutive equations with various length scales for metal forming simulation.
    USNCCM12: 12th US National Congress on Computational Mechanics, Raleigh, July 23-25, 2013 (USA).
    2013.

Proceedings articles indexed in international databases

  1. Weijie Liu, Khemais Saanouni, Carl Labergère, Houssem Badreddine, Samuel Forest, Ping Hu,
    Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature.
    MATEC Web of Conferences 80(01002), 7.
    2016.
  2. Zohra Sendi, Hédi Belhadjsalah, Carl Labergere, Khemais Saanouni,
    An Element Free Galerkin method for an elastoplastic coupled to damage analysis.
    MATEC Web of Conferences 80(07005), 7.
    2016.
  3. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    MATEC Web of Conferences 80(01001).
    2016.
  4. Carl Labergère, Khemais Saanouni, Souhail Benafia, Joel Galmiche, Husein Soulaiman,
    Numerical simulation of fine blanking process using fully coupled advanced constitutive equations with ductile damage.
    11th International Conference on Numerical Methods in Industrial Forming, NUMIFORM’2013 NUMIFORM’2013, July 6-10, 2013, Shenyang, China, 6.
    2013.
  5. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Modelling and numerical simulation of thick sheets slitting using continuum damage mechanics,.
    11th International Conference on Numerical Methods in Industrial Forming, NUMIFORM’2013 NUMIFORM’2013, July 6-10, 2013, Shenyang, China, 6.
    2013.
  6. Saber Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 Barcelona 3-5 September 2013, Spain.
    2013.
  7. Trong Dung Nguyen, Houssem Badreddine, Khemais Saanouni,
    ON ANISOTROPIC DAMAGE COUPLED WITH ELASTO-PLASTICITY AT FINITE STRAIN.
    ICDM - International Conference on Damage Mechanics, Belgrade, Serbia, June 2012, 4.
    2012.
  8. T. D. Nguyen, Houssem Badreddine, Khemais Saanouni,
    NON-ASSOCIATIVE FINITE STRAIN PLASTICITY COUPLED WITH ANISOTROPIC DUCTILE DAMAGE FOR METAL FORMING.
    11th Biennial Conference On Engineering Systems Design And Analysis ESDA2012 , Nantes, France, July 2012, 6.
    2012.
  9. M. Malekipour Gharbi, Carl Labergère, Houssem Badreddine, C. Soyarslan, A. Weinrich, M. Hermes, S. Chatti, H. Sulaiman, Khemais Saanouni, E. Tekkaya,
    Advanced experimental-numericla investigations of cold bending of high strength steels.
    International conference on technology of plasticity, dortmund, September 2011, 6.
    2011.
  10. N. Hfaiedh, Khemais Saanouni, Manuel François, Arjen Roos,
    Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials.
    Procedia Engineering 1(1), 229–232.
    2009.
  11. Houssem Badreddine, Khemais Saanouni,
    3D vs plane stress formulations of anisotropic non normal plastic and damage models for sheet metal forming.
    ICF12: 12th International Conference on Fracture, Ottawa, Canada, Juillet 2009, 6.
    2009.
  12. A. Baczmański, Benoît Panicaud, Manuel François, Khemais Saanouni, N. Hfaiedh, K. Wierzbanowski,
    Study of damage process using self-consistent elastoplastic model.
    Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 1181–1185.
    2008.
  13. Wajdi Rajhi, Khémaïs Saanouni, Houssem Badreddine, Carl Labergère,
    Simulation numérique de l¿endommagement dans quelques procédés de formage plastique d'un acier de hautes performances.
    COTUME¿2008: Congrès Tunisien de Mécanique , Hammamet, Tunisie, Mars 2008, 6.
    2008.
  14. Houssem Badreddine, Carl Labergère, Khémaïs Saanouni, Wajdi Rajhi, Alain Rassineux, Dominique Kircher,
    F.E. elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    ESAFORM 2008, Lyon, April 2008, 6.
    2008.
  15. Khémaïs Saanouni, Houssem Badreddine,
    3D vs plane stress formulations of anisotropic non normal plasticity with damage for sheet metal forming.
    IDDRG 2008, Olofström, Sweden, Juin 2008, 6.
    2008.
  16. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Prediction of damage in hydro bulging test using a non normal and non quadratic anisotropic plasticity formulation, , 19-21 March 2007.
    2nd World congress Design and Modelling of Mechanical System, Monastir, Tunisia, March 2007, 6.
    2007.
  17. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Non normal and non quadratic anisotropic plasticity coupled with ductile damage in sheet metal forming: Application to the hydro bulging test..
    10th ESAFORM conference on material forming, Zaragoza, Spain, April 2007, 6.
    2007.
  18. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Impact of a non associative plasticity on damage prediction in sheet metal forming, May 21-23, 2007.
    IDDRG¿2007, Gyõr, Hungary, May 2007, 6.
    2007.
  19. Khémaïs Saanouni, Houssem Badreddine,
    Damage prediction in sheet metal forming, 18-21 June, 2007.
    invited paper, NUMIFORM 2007,, Porto, Potugal, June 2007, 6.
    2007.
  20. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    New rotational kinematics in anisotropic elasto ¿ plasticity with damage 19-21 Jun 2006,.
    IDDRG conference , Porto, Portugal, June 2006, 6.
    2006.
  21. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Influence of anisotropic non normal plasticity on the isotropic ductile damage in sheet metal forming.
    ICAMEM conference 17-19 Dec 2006, , Hammamet-Tunisia, December 2006, 6.
    2006.
  22. Khémaïs Saanouni, Houssem Badreddine,
    Damage prediction in sheet metal forming. Theory, numerics and application.
    Keynote Lecture, IDDRG 2006, Porto, Portugal, June 2006, 6.
    2006.
  23. Nabil Belamri, Abel Cherouat, Khémaïs Saanouni, Philippe Autesserre,
    Simulation de refendage 3D des tôles minces en utilisant le couplage de l'écoulement plastique anisotrope avec endommagement ductile.
    Conférence Internationale de Mécanique Avancée (CIMA), Boumerdes Algérie, Septembre 2005, 4.
    2005.
  24. Nabil Belamri, Abel Cherouat, Khémaïs Saanouni, Philippe Autesserre,
    Numerical simulation 3D of sheet metal slitting process.
    4th International Conference on Fracture and Damage Mechanics, Mallorca, Spain, July 2005, 6.
    2005.
  25. Nabil Belamri, Mourad Khelifa, Khémaïs Saanouni, Abel Cherouat, Philippe Autesserre,
    Sheet metal blanking simulation using a coupled anisotropic plastic flow damage modelling.
    7th International ESAFORM Conference on Material Forming, Trondheim, Norway, April 2004.
    2004.
  26. Philippe Lestriez, Abel Cherouat, Khémaïs Saanouni, Jean-François Mariage,
    Orthogonal metal cutting simulation by thermo-elasto-visco-plastic constitutive equations fully coupled with ductile damage.
    8th International Conference on Numerical Methods in Industrial Forming Process, Columbus (Etats Unis), June 2004.
    2004.
  27. Philippe Lestriez, Jean-François Mariage, Khémaïs Saanouni, Abel Cherouat,
    Numerical simulation of wheel forming process with damage and thermal effects.
    8th International Conference on Numerical Methods in Industrial Forming Process, Columbus (Etats Unis), June 2004.
    2004.
  28. Mourad Khelifa, Nabil Belamri, Khémaïs Saanouni, Abel Cherouat,
    Damage Effect in Metal Forming Processes using Adaptive Remeshing.
    4th International Conference on Engineering Computational Technology, Lisbon, Portugal, September 2004.
    2004.
  29. Jean-François Mariage, Khémaïs Saanouni, Philippe Lestriez, Abel Cherouat,
    Sheet metal deburring and drilling simulation by continuum damage mechanics.
    6th International ESAFORM Conference on Material Forming, Salerno (Italia), April 2003.
    2003.
  30. Philippe Lestriez, Khémaïs Saanouni, Jean-François Mariage, Abel Cherouat,
    Numerical prediction of damage in metal forming processes including thermal effects.
    6th International ESAFORM Conference on Material Forming, Salerno (Italia), April 2003.
    2003.
  31. Abel Cherouat, Houman Borouchaki, Khémaïs Saanouni, Patrick Laug,
    An adaptive remeshing procedure in elastoplastic deformation with ductile damage application in metal forming processes.
    6th International ESAFORM Conference on Material Forming, Salerno (Italia), April 2003.
    2003.
  32. Y Guo, Khémaïs Saanouni, Abel Cherouat, Y Li, G Loppin, K Debray,
    Two methodologies for the simulation of ductile damage in sheet metal forming processes.
    International Symposium on Advanced Forming Technology, Beijing (China), 2002.
    2002.
  33. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Simulation numérique du forgeage d'un écrou six pns avec prise en compte du couplage comportement endommagement dans Forge 2 et Forge 3.
    4ème Journées Scientifiques et Techniques en Mécanique et Matériaux JSTMM'02, Monastir (Tunisie) OCTOBRE 2002.
    2002.
  34. J.F Mariage, Khémaïs Saanouni, Abel Cherouat,
    Sheet metal cutting simulation by continum damage mechanics.
    5th International Conference on Material Forming, Krakow (Poland), APRIL 2002.
    2002.
  35. Houman Borouchaki, P Laug, Abel Cherouat, Khémaïs Saanouni,
    Remeshing process in large deformation. Application to 2 D structure forming.
    8th International Conference on Numerical Grid Generation in Computational Field Simulations, Honolulu (Hawaii), JUNE 2002.
    2002.
  36. Abel Cherouat, Khémaïs Saanouni, P Lestriez,
    Numerical simulation of hydroforming processes with damage occurrence.
    5th International Conference on Material Forming, Krakow (Poland), APRIL 2002.
    2002.
  37. Khémaïs Saanouni, Abel Cherouat, P Lestriez, Houman Borouchaki,
    Numerical simulation of damage in metal forming processes using Abaqus.
    Abaqus World User's Conference, Newport (Rhode Island, USA), MAY 2002.
    2002.
  38. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Numerical simulation of damage in metal forming processes.
    MPD 4, Cachan (France), OCTOBER 2002.
    2002.
  39. Abel Cherouat, J.F Mariage, P Lestriez, Khémaïs Saanouni,
    Numerical Simulation of damage in metal forming process.
    4th International Conference on Materials Processes Defects, Cachan (France), September 2002.
    2002.
  40. P Lestriez, J.F Mariage, Khémaïs Saanouni,
    Numerical Simulation of 3D Sheet Forming Processes.
    5th International Conference and Workshop on, Taejon (Korea), October 2002.
    2002.
  41. P Lestriez, Khémaïs Saanouni, J.F Mariage, Abel Cherouat,
    Numerical prediction of damage in metal forming processes including thermal effects.
    7th International Mechanical Engineering Congress, ASME'02, New Orleans (USA), November 2002.
    2002.
  42. Abel Cherouat, Houman Borouchaki, Khémaïs Saanouni, Karim Nesnas, Jean-François Mariage,
    Ductile damage prediction in hydroforming processes.
    5th International Conference and Workshop on, Taejon (Korea), October 2002.
    2002.
  43. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Optimization of Hydroforming Processes with Respect to Fracture.
    4th International Conference on Material Forming, ESAFORM, Liege (Belgium), April 2001.
    2001.

Unindexed proceedings articles

  1. Evangelia Diamantopoulou, Carl Labergere, Bruno Guelorget, Manuel François, Khemais Saanouni,
    An experimental-numerical study of the plastic flow localization based on a generalized micromorphic formulation.
    Proceedings of the 5th International Conference on Material Modeling (ICMM5).
    2017.
  2. Zhenming Yue, Houssem Badreddine, Khemais Saanouni,
    Numerical prediction of incremental sheet forming based on ductile damage model with considering distortional hardening.
    NUMIFORM2016, July 4th - 6th 2016, Troyes, France.
    2016.
  3. F. Wang, Alain Rassineux, Carl Labergere, Khemais Saanouni,
    Improving 3D complex crack propagation in tetrahedral element.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  4. Mohamed Ali Dhifallah, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Fatigue Life prediction methodology applied to 3D mechanical component.
    2th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  5. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes..
    , 12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  6. Zohra Sendi, Houssem Badreddine, Carl Labergere, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  7. Houssem Badreddine, Khemais Saanouni, Trong Dung Nguyen,
    The use of an advanced anisotropic damage model to the sheet metal forming simulations.
    The XII International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS2013, September 3-5, 2013, Barcelona, Spain, 6 pages.
    2013.
  8. Wajdi Rajhi, Ahmed Jaballah, Habib Sidhom, Khemais Saanouni,
    Mise en evidence expérimentale de l’anisotropie induite par l’endommagement ductile dans l’acier inoxydable austénitique AISI 316L.
    5ème Congrès International Conception et Modélisation des Systèmes Mécaniques (CMSM’2013), 25-27 Mars 2013, Djerba (Tunisie), 6 pages.
    2013.
  9. Mohamed Hamed, Khemais Saanouni,
    Formulation non locale d’un modèle élastoplastique en gradient d’endommagement et d’écrouissage isotrope micromorphiques.
    11ème Colloque National en Calcul des Structures (CSM 2013), 13-17 Mai 2013, Giens, France, 6 pages.
    2013.
  10. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 , pp. 1066-1074, Barcelona 3-5 September 2013, Spain, 6 pages.
    2013.
  11. Mohamed Hamed, Khemais Saanouni,
    Advanced Nonlocal Elatoplastic Constitutive Equations in the Framework of the Micromorphic Continua.
    CFRAC’2013: the 3rd International Conference on Computational Modeling of fracture and Failure of Material and Strcuture, 5-7 June 2013, Prague, Czech Republic, 6 pages.
    2013.
  12. Trong Dung Nguyen, Houssem Badreddine, Khémais Saanouni,
    Plasticité anisotrope non-associée couplée à un endommagement anisotrope en transformations finies.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  13. Carl Labergère, Houssem Badreddine, Wajdi Rajhi, Khémaïs Saanouni, Alain Rassineux,
    Caractérisation numérique de l'endommagement ductile d¿aciers à hautes performances. Essais d¿expansion et de pliage.
    CFM'2009:XIXème congrès Français de Mécanique, Marseille, Août 2009, 6.
    2009.
  14. Nabil Belamri, Abel Cherouat, Khémaïs Saanouni, Philippe Autesserre,
    Simulation numérique du refendage de tôles minces.
    17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.
  15. Philippe Lestriez, Khémaïs Saanouni, Abel Cherouat, Philippe Autesserre,
    Simulation de la coupe orthogonale par couplage thermique-comportement-endommagement en TF.
    17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.
  16. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui, Mourad Khelifa, Amen Gahbich,
    Formulation en GD d'un modèle élastoplastique couplé à l'endommagement, , Troyes, 29 août, 2 Septembre, 2005.
    CFM2005, 17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.
  17. P Lestriez, Abel Cherouat, J.F Mariage, Khémaïs Saanouni,
    Simulation numérique du couplage thermomécanique-endommagement : application à la mise en forme.
    1er Colloque sur les interactions de modèles, expériences en mécanique du solide, Besançon (France), JUILLET 2002.
    2002.
  18. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Simulation numérique d'un procédé de perçage-ébavurage d'une roue en plasticité avec endommagement.
    Matériaux 2002 de la Conception à la Mise en œuvre, Tours (France), octobre 2002.
    2002.
  19. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Optimization of hydroforming processes with respect to fracture.
    4 th Esaform Conference on material forming, liège (Belgium), APRIL 2001, 3.
    2001.
  20. Khémaïs Saanouni, Abel Cherouat, J.F Mariage, Karim Nesnas,
    On the numerical simulation of 3D forging of some complex parts considering the damage occurence.
    4 th Esaform conference on material forming, Liège (Belgium), APRIL 2001, 4.
    2001.
  21. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Numerical Simulation of Damage in Metal Forming Processes.
    4th International Conference on Material Forming, ESAFORM, Liege (Belgium), APRIL 2001, 3.
    2001.
  22. P Breitkofpf, A Rassineux, P Villon, Abel Cherouat, Khémaïs Saanouni,
    Meshfree operators for consistent field transfert in large deformation plasticity.
    ECCM, Cracow (Poland), JUNE 2001.
    2001.
  23. Khemais Saanouni, Abel Cherouat, Y Hammi,
    Numerical aspects of finite elastoplasticity with damage for metal forming.
    EUROMECH 417 Numerical Modelling in Damage Mechanics, Troyes (France), OCTOBER 2000, 1.
    2000.

Conference talks with no proceedings

  1. Carl Labergere, Khemais Saanouni, F. Bumbieler,
    Modeling and Simulation of the long term mechanical behavior of a steel casing subjected to general corrosion.
    EMI International Conference, Metz, France, 25-27 October, 2016.
    2016.
  2. Carl Labergere, Khemais Saanouni, F. Bumbieler,
    Modeling and Simulation of the long term mechanical behavior of a steel casing subjected to general corrosion.
    EMI International Conference, Metz, France, 25-27 October, 2016.
    2016.
  3. Mohamed Hamed, Khemais Saanouni,
    Elastoplastic nonlocal micromorphic formulation with damage and hardening gradients.
    The XII International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS2013, September 3-5, 2013, Barcelona, Spain.
    2013.
  4. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling and numerical simulation of ductile damage in cold bulk metal forming.
    46th ICFG Plenary Meeting, Paris September 15th to 18th, 2013.
    2013.
  5. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    On the modelling of initial and induced anisotropies for the accurate numerical simulation of sheet and bulk metal forming processes.
    FTF'2009: Forming Technology Forum, Zurich, Suisserland, May 2009.
    2009.
  6. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling in metal forming including the ductile damage occurrence.
    PLASTICITY 2009, Saint Thomas, USA, January 2009.
    2009.

Conference posters

  1. Benjamin Sarre, Sylvain Flouriot, Thomas Paris, Benoit Panicaud, Khemais Saanouni, Guillaume Geandier, Elisabeth Aeby-Gautier,
    Multiscale investigation of the mechanical behavior of a TA6V welded joint.
    MMM Dijon.
    2016.
  2. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni, Manuel François, Virginie Lacote,
    Experimental Characterization and Comparison of Plane and Corrugated Aluminium Sheets Behavior.
    ESAFORM 2013, Aveiro University, 22-24 avril 2013, Portugal.
    2013.

Scientific books (or chapters)

  1. Benoît Panicaud, Léa Le Joncour, Neïla Hfaeidh, Khemais Saanouni,
    Micromechanical Polycrystalline damage-Plasticity Modeling for metal forming processes.
    Handbook of Damage Mechanics, Nano to Macro Scale for Materials and Structures 2, 963 – 1020.
    Springer, 2015.
  2. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.
  3. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine, ,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.
  4. khemais Saanouni,
    Modélisation et simulation numériques en formage Virtuel.
    Lavoisier/Hermes, 2012.
  5. khemais saanouni,
    Damage Mechanics in metal forming. Advanced modeling and numerical simulation.
    ISTE/Wiley, 2012.

Other productions

  1. Khemais Saanouni,
    Proceedings of NUMIFORM 2016 - Préface.
    The 12th International Conference on Numerical Methods in Industrial Forming Processes, Troyes, France, July 4-7, 2016 80.
    2016.