Peer-reviewed journal articles indexed in international databases

  1. Chuan Zhang, Julien Gardan, Feng Zhu, Houssem Badreddine, Xiao-Lu Gong,
    Thermal Behavior Analysis of open-Cell Metal Foams Manufactured by Rapid Tooling.
    Journal of Porous Media 20.
    BegellHouse, 2017.
  2. Hassan Diab, Younes Rafic Pascal Lafon,
    Survey of research on the optimal design of sea harbours.
    International Journal of Naval Architecture and Ocean Engineering in press, 1–13.
    Society of Naval Architects of Korea, 2017.
  3. Yuchen Zhao, Léa Le Joncour, Andrzej Baczmanski, Elzbieta Gadalińska, Sebastian Wroński, Benoît Panicaud, Manuel François, Chedly Braham, Thomas Buslaps,
    Stress distribution correlated with damage in duplex stainless steel studied by synchrotron diffraction during plastic necking.
    Materials and Design 113, 157–168.
    Elsevier, 2017.
  4. Intissar FRIH, Guillaume MONTAY, Pierre-Antoine ADRAGNA,
    Microstructure, Hardness, and Residual Stress Distributions in T-Joint Weld of HSLA S500MC Steel.
    Metallurgical and Materials Transactions A 48(3), 1103–1110.
    Springer US, 2017.
  5. Julien Gardan,
    Method for characterization and enhancement of 3D printing by binder jetting applied to the textures quality.
    Assembly Automation 37(2), pp.–, doi: 10.1108/AA.
    Emerald, 2017.
  6. Armand Kanjer, Virgil Optasanu, Luc Lavisse, Maria Carmen Marco de Lucas, Steeve Dejardin, Manuel François, Pascal Berger, Patrice Peyre, Cyril Gorny, Tony Montesin,
    Influence of mechanical surface treatment on high temperature oxidation of pure-titanium.
    Oxidation of Metals.
    Springer, 2017.
  7. Zhidan Sun, Delphine Retraint, Thierry Baudin, Anne-Laure Helbert, François Brisset, Mahdi Chemkhi, Jianqiang Zhou, Pascale Kanouté,
    Experimental study of microstructure changes due to low cycle fatigue of a steel nanocrystallised by Surface Mechanical Attrition Treatment (SMAT).
    Materials Characterization 124, 117–121.
    Elsevier, 2017.
  8. Jianqiang Zhou, Zhidan Sun, Pascale Kanouté, Delphine Retraint,
    Effect of surface mechanical attrition treatment on low cycle fatigue properties of an austenitic stainless steel.
    International Journal of Fatigue 103, 309–317.
    2017.
  9. Yunlong Zhu, Julien Vaillant, Manuel François, Guillaume Montay, Aurelien Bruyant,
    Co-axis digital holography based on sinusoidal phase modulation using generalized lock-in detection.
    Applied Optics 56(13), F97–F104.
    Optical Society of America, 2017.
  10. Gwénaëlle Proust, Patrick Trimby, Sandra Piazolo, Delphine Retraint,
    Characterization of Ultra-Fine Grained and Nanocrystalline Materials Using Transmission Kikuchi Diffraction.
    Journal of Visualized Experiments 2017(122), e55506.
    http://www.jove.com/video/55506, 2017.
  11. Akram Alhussein, Sofiane Achache, Regis Deturche, Frederic Sanchette, Cesar Pulgarin, John Kiwi, Sami Rtimi,
    Beneficial effect of Cu on Ti-Nb-Ta-Zr sputtered uniform/adhesive gum films accelerating bacterial inactivation under indoor visible light.
    Colloids and Surfaces B: Biointerfaces 152, 152–158.
    Elsevier, 2017.
  12. Mohamed Fares Slim, Akram Alhussein, Frederic Sanchette, Bruno Guelorget, Manuel François,
    An enhanced formulation to determine Young's and shear moduli of thin films by means of Impulse Excitation Technique.
    Thin Solid Films 631, 172–179.
    Elsevier, 2017.
  13. Guillaume Altmeyer, Benoît Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Viscoelasticity behavior for finite deformations, using a consistent hypoelastic model based on Rivlin materials.
    Continuum Mechanics and Thermodynamics, 1–18.
    2016.
  14. Chongpu Zhai, Yixiang Gan, Dorian Hanaor, Gwénaëlle Proust, Delphine Retraint,
    The Role of Surface Structure in Normal Contact Stiffness.
    Experimental Mechanics 56(3), 359–368.
    Springer US, 2016.
  15. Yishi Su, Zhiqiang Li, Xiao-lu Gong, Qiubao Ouyang, Qiang Guo, Cuiping Guo, Jie Zhang, Di Zhang,
    Structural modeling and mechanical behavior of Metal-Porous-Polymer-Composites (MPPCs) with different polymer volume fractions.
    Composite Structures 153, 673–681.
    Elsevier, 2016.
  16. Sofiane Achache, Akram Alhussein, Salim Lamri, Manuel François, Frederic Sanchette, Cesar Pulgarin, John Kiwi, Sami Rtimi,
    Sputtered Gum metal thin films showing bacterial inactivation and biocompatibility.
    Colloids and Surfaces B: Biointerfaces 146, 687–691.
    Elsevier, 2016.
  17. Donato Gallitelli, Vincent Boyer, Maxime Gelineau, Yann Colaitis, Emmanuelle Rouhaud, Delphine Retraint, Régis Kubler, Marc Desvignes, Laurent Barrallier,
    Simulation of shot peening: From process parameters to residual stress fields in a structure.
    Comptes Rendus - Mecanique 344(4-5), 355–374.
    Elsevier, 2016.
  18. W. Zhu, D. Wang, B. Eynard, M. Bricogne, S. Remy,
    Procedural approach for 3D modeling of city buildings.
    IFIP Advances in Information and Communication Technology 467, 137–148.
    2016.
  19. Houssem Badreddine, Khemais Saanouni,
    On the full coupling of plastic anisotropy and anisotropic ductile damage under finite strains.
    International Journal of Damage (In press).
    Sage, 2016.
  20. Mohamed Fares Slim, Akram Alhussein, Alain Billard, Frederic Sanchette, Manuel François,
    On the determination of Young’s modulus of thin films with impulse excitation technique.
    Journal of Materials Research 32, 1–15.
    Cambridge - Materials Research Society, 2016.
  21. Zhidan Sun, Lahouari Benabou, Hongqian Xue,
    Numerical modeling and simulation of intergranular fracture due to dynamic embrittlement for a Cu-Ni-Si alloy.
    Mechanics Research Communication 75, 81–88.
    2016.
  22. Feng ZHU, Chuan ZHANG, Xiao-lu GONG,
    Numerical analysis and comparison of the thermal performance enhancement methods for metal foam/ phase change material composite.
    Applied Thermal Engineering 109(Part A), 373–383.
    Elsevier, 2016.
  23. Evangelia Diamantopoulou, Carl Labergere, Khemais Saanouni,
    Non local damage based on micromorphic formulation.
    19th ESAFORM Conference, AIP Conference Proceedings, 27-29 April 2016, Nantes 1769.
    2016.
  24. Yishi Su, Di Zhang, Xiao-Lu Gong, Min Shen,
    Mchanical behavior in bending deformation of thermoplastic composite laminates with different stacking sequences.
    Journal of Composite Materials 50(8), 1037–1048.
    SAGE journals, 2016.
  25. Mohamed I. Ouamer-Ali, Florent Laroche, Sébastien Remy, Alain Bernard,
    Knowledge and information structuring in reverse engineering of mechanical systems.
    IFIP Advances in Information and Communication Technology 467, 418–427.
    2016.
  26. Elnaz Asadollahi-Yazdi, Julien Gardan, Pascal Lafon,
    Integrated Design in Additive Manufacturing Based on Design for Manufacturing.
    International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 10, 1104–1111.
    2016.
  27. Mingchuan Wang, Benoît Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    Incremental constitutive models for elastoplastic materials undergoing finite deformations by using a four-dimensional formalism.
    International Journal of Engineering Science 106, 199–219.
    https://doi.org/10.1016/j.ijengsci.2016.06.006, 2016.
  28. Wenhua Zhu, Matthieu Bricogne, Alexandre Durupt, Sébastien Remy, Baorui Lui, Benoit Eynard,
    Implementations of Characterization of wood Management Technologies: a Case Study in Chinese Aeronautical Industry.
    IFAC-PapersOnLine 49(12), 485–490.
    Elsevier B.V., 2016.
  29. Sofiane Achache, Salim Lamri, Akram Alhussein, Alain Billard, Manuel François, Frederic Sanchette,
    Gum Metal thin films obtained by magnetron sputtering of a Ti-Nb-Zr-Ta target.
    Materials Science & Engineering A 673, 492–502.
    Elsevier, 2016.
  30. Andrzej Baczmański, Yuchen Zhao, Elzbieta Gadalińska, Léa Le Joncour, Sebastian Wroński, Chedly Braham, Benoît Panicaud, Manuel François, Thomas Buslaps, K. Soloducha,
    Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model.
    International Journal of Plasticity 81, 102–122.
    2016.
  31. Khouloud Cheour, Mustapha Assarar, Daniel Scida, Rezak Ayad, Xiao-Lu Gong,
    Effect of Water Ageing on the Free Vibration Behaviour of Flax-Fibre Reinforced Composite Materials.
    Composite Structures 152(15), 259–266.
    2016.
  32. Houssem Badreddine, Carl Labergère, Khemais Saanouni,
    Ductile damage prediction in sheet and bulk metal forming.
    Comptes Rendus Mécanique 344, 296–318.
    ELSEVIER, 2016.
  33. Benoit Panicaud, Emmanuelle Rouhaud,
    Derivation of Cosserat’s medium equations using different multi-dimensional frameworks.
    Acta Mechanica 227(2), 367–385.
    2016.
  34. Benoît Panicaud, Emmanuelle Rouhaud, Guillaume Altmeyer, Mingchuan Wang, Richard Kerner, Arjen Roos, O. Ameline,
    Consistent hypo-elastic behavior using the four-dimensional formalism of differential geometry.
    Acta Mechanica 227(3), 651–675.
    2016.
  35. Julien Gardan, Duy Cuong Nguyen, Lionel Roucoules, Guillaume Montay,
    Characterization of Wood Filament in Additive Deposition to Study the Mechanical Behavior of Reconstituted Wood Products.
    Journal of Engineered Fibers and Fabrics 11(4), 56–63.
    Association of Nonwoven Fabrics Industry INDIA, 2016.
  36. Julien Gardan, Ali Makke, Naman Recho,
    A Method to Improve the Fracture Toughness Using 3D Printing by Extrusion Deposition.
    Procedia Structural Integrity Volume 2, Pages 144–151.
    Elsevier, 2016.
  37. Chengheri Bao, Manuel François, Léa Le Joncour,
    A closer look at the diffuse and localized necking of a metallic thin sheet - evolution of the two bands pattern.
    Strain, 244–260.
    Wiley, 2016.
  38. Frédéric Menan, Pierre-Antoine Adragna, Manuel François,
    The Stress-Strength Interference Method Applied to Fatigue Design: the Independence of the Random Variables.
    Procedia Engineering 133, 746 – 757.
    Elsevier, 2015.
  39. Xiaohui ZHANG, Xiao-Lu GONG, Guillaume MONTAY,
    The influences of compression temperature on the fiber structure and tensile properties of hemp reinforced polypropylene composites.
    Advanced Materials Research 1073-1076, 62–65.
    2015.
  40. Thomas Maurer, Joseph Marae-Djouda, Ugo Cataldi, Arthur Gontier, Guillaume Montay, Yazid Madi, Benoît Panicaud, Demetrio Macias, Pierre-Michel Adam, Gaëtan Lévêque, Thomas Bürgi, Roberto Caputo,
    The beginnings of plasmomechanics: towards plasmonic strain sensors.
    Frontiers of Materials science 9(2), 170–177.
    Springer, 2015.
  41. Amélie Morançais, Mathieu Fèvre, Manuel François, Pascale Kanouté, Serge Kruch, Arnaud Longuet,
    Residual stress determination in a shot-peened nickel-based single crystal superalloy using X-ray diffraction.
    Journal of Applied Crystallography 48, 1761–1776.
    International Union of Crystallography / Wiley, 2015.
  42. Carl Labergère, Khemais Saanouni, Zhidan Sun, Mohamed Ali Dhifallah, Yisa Li, Jean-louis Duval,
    Prediction of low cycle fatigue life using cycles jumping integration scheme.
    Applied Mechanics and Materials 784, 308–316.
    Trans Tech Publications, 2015.
  43. Miriam Kozemjakin Da Silva, Sébastien Remy, Tatiana Reyes,
    On providing design process information to the environmental expert.
    Research in Engineering Design 26, 327–336.
    Springer, 2015.
  44. Sofiane Achache, Salim Lamri, Arab Pour Yazdi, Alain Billard, Manuel François, Frédéric Sanchette,
    Ni-free superelastic binary Ti-Nb coating obtained by DC magnetron co-sputtering.
    Surface and Coatings Technology 275, 283–288.
    Elsevier, 2015.
  45. Von Dim Nguyen, Pierre-Antoine Adragna, Pascal Lafon,
    Multi-Objective Optimization under Uncertainty and Decision-Making Support for Sheet Metal Forming.
    Key Engineering Materials 651-653, 1400–1405.
    Trans Tech Publications}, 2015.
  46. Zhidan Sun, Delphine Retraint, Bruno Guelorget, Laurent Waltz,
    Micro-pillar compression tests to characterize the mechanical behavior of a nanocrystalline layer induced by SMAT in a 316L stainless steel.
    Matériaux & Technique 103(3), 304.
    EDP Sciences, 2015.
  47. Nicolas Gardan, Alexandre Schneider, Julien Gardan,
    Material and process characterization for coupling topological optimization to additive manufacturing.
    Computer-Aided Design and Applications, 1–11.
    2015.
  48. W. Zhu, B. Eynard, M. Bricogne, S. Remy, W. Wan,
    Framework for information modeling of an integrated building.
    IET Conference Publications 2015(CP672), 139–144.
    2015.
  49. Zhenming Yue, Houssem Badreddine, T. Dang, Khemais Saanouni, Erman Tekkaya,
    Formability prediction of AL7020 with experimental and numerical failure criteria.
    Journal of Materials Processing Technology 218, 80 – 88.
    ELSEVIER, 2015.
  50. Sabeur Msolli, Houssem Badreddine, Carl Labergere, Marion Martiny, Guillaume Robin, Mohamed Jrad, Khemais Saanouni, François Choquart,
    Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets.
    International Journal of Mechanical Sciences 99, 262–273.
    ELSEVIER, 2015.
  51. Alicia I. Durán, Javier W. Signorelli, Diego J. Celentano, Marcela A. Cruchaga, Manuel François,
    Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet.
    Journal of Materials Engineering and Performance 24(10), 4156–4170.
    Springer, 2015.
  52. Joël Faure, Richard Drevet, Nader Ben Jaber, Sylvain Potiron, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Electrophoretic Deposition of Hydroxyapatite and 58S Bioactive Glass Coatings on the Ti6Al4V Alloy Subjected to Surface Mechanical Attrition Treatment.
    Key Engineering Materials 654, 149–153.
    2015.
  53. Gwénaëlle Proust, Delphine Retraint, Mahdi Chemkhi, Arjen Roos, Clemence Demangel,
    Electron backscatter diffraction and transmission Kikuchi diffraction analysis of an austenitic stainless steel subjected to surface mechanical attrition treatment and plasma nitriding.
    Microscopy and Microanalysis 21(04), 919–926.
    Cambridge University Press, 2015.
  54. Yugang Li, Pascale Kanouté, Manuel François,
    Disturbance induced by surface preparation on instrumented indentation test.
    Materials Science and Engineering A 642, 381–390.
    Elsevier, 2015.
  55. Julien Gardan,
    Definition of users’ requirements in the customized product design through a user-centered translation method.
    International Journal on Interactive Design and Manufacturing (IJIDeM) -, 1–7.
    Springer, 2015.
  56. Houssem Badreddine, Khemais Saanouni, Trong Dung Nguyen,
    Damage anisotropy and its effect on the plastic anisotropy evolution under finite strains.
    International Journal of Solids and Structures 63, 11–31.
    ELSEVIER, 2015.
  57. Lahouari Benabou, Zhidan Sun, Philippe Pougnet, Pierre-Richard Dahoo,
    Continuum damage approach for fatigue life prediction of viscoplastic solder joints.
    Journal of Mechanics 31, 525–531.
    Cambridge University Press, 2015.
  58. Lahouari Benabou, Zhidan Sun,
    Analytical homogenization modeling and computational simulation of intergranular fracture in polycrystals.
    International Journal of Fracture 193, 59–75.
    Springer, 2015.
  59. Julien Gardan,
    Additive manufacturing technologies: state of the art and trends.
    International Journal of Production Research.
    Taylor & Francis, 2015.
  60. Chuan Zhang, Feng Zhu, Houssem Badreddine, Xiao-lu Gong,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    Journal of Materials Science and Chemical Engineering 3, 113–118.
    Scientific Rechearch, 2015.
  61. Shijie Zhu, Abel Cherouat, Houman Borouchaki and Xiao-Lu Gong,
    3D remeshing simulation of aluminum foams behavior under static load.
    Advanced Materials Research Vol. 1099, 17–24.
    Trans Tech Publications, 2015.
  62. Shijie Zhu, Abel Cherouat, Houman Borouchaki and X. Lu GONG,
    3D remeshing simulation of aluminum foams behavior under static load.
    Advanced Materials Research 1099, 17–24.
    Trans Tech Publications, 2015.
  63. Shijie Zhu, Abel Cherouat, Houman Borouchaki, Xiao-Lu Gong,
    3D remeshing simulation of aluminum foams behavior under static load.
    Advanced Materials Research 1099, 17–24.
    Trans Tech Publications, 2015.
  64. Shijie Zhu, Abel Cherouat, Houman Borouchaki and X. Lu GONG,
    3D remeshing simulation of aluminum foams behavior under static load.
    Advanced Materials Research 1099, 17–24.
    2015.
  65. Abel Cherouat, Shi Jie Zhu, Houman Borouchaki, Xiao-Lu Gong,
    3D Numerical Simulation of Aluminum Foams Behavior in Large Deformation.
    Applied Mechanics and Materials 749, 3–7.
    Trans Tech Publications, 2015.
  66. Zhenming Yue, C. Soyarslan, Houssem Badreddine, Khemais Saanouni, Erman Tekkaya,
    . Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental–numerical methodology with various triaxialities.
    International Journal of Damage Mechanics 24(5), 683–710.
    Sage, 2015.
  67. Jianfei Wang, Yishi Su, Xiao-Lu Gong,
    Thermo-mechanical Behavior Analysis of Pressure Infiltration Casting Process for Manufacturing Open-cell Metal Foam.
    Advanced Materials Research 853, 125–130.
    2014.
  68. Andrzej Baczmanski, Elzbieta Gadalinska, Sebastian Wronski, Léa Le Joncour, Benoît Panicaud, Manuel François, Chedly Braham, Vincent Klosek, Anna Paradowska,
    Study of Stresses in Texture Components Using Neutron Diffraction.
    Materials Science Forum 768-769, 289–295.
    Trans Tech Publications, 2014.
  69. A. Baczmański, E. Gadalińska, C. Braham, S. Wroński, Léa Le Joncour, Benoît Panicaud, Manuel Francois, V. Klosek,
    Study of micromechanical behaviour of two phase polycrystalline materials using diffraction and self consistent model.
    Materials Science Forum 783-786, 2059–2064.
    2014.
  70. Andrzej Baczmanski, Elzbieta Gadalinska, Sebastian Wronski, Chedly Braham, Wilfrid Seiler, Manuel François, Léa Le Joncour, Benoît Panicaud, Thomas Buslaps, Houda Yahyaoui, Habib Sidhom, Yuchen Zhao,
    Study of mechanical behaviour of polycrystalline materials at the mesoscale using high energy X-ray diffraction.
    Advanced Materials Research 996, 118–123.
    Trans Tech Publications, 2014.
  71. Wiem Toumi Ajimi, Delphine Retraint, Guillaume Montay,
    Structure-mechanical property relationship in hot-dip galvanized S355K2+N steel plates.
    Advanced Materials Research 996, 884–889.
    Trans Tech Publications, 2014.
  72. Kun Jia, Mohammad Khayway, Yugang Li, Jean-Louis Bijeon, Pierre-Michel Adam, Régis Déturche, Bruno Guelorget, Manuel François, Guy Louarn, Rodica Eléna Ionescu,
    Strong improvements of LSPR sensitivity by using Au/Ag bi-metallic nanostructures modified with poly-dopamine films.
    ACS Applied Materials & Interfaces 6, 219–227.
    ACS, 2014.
  73. Johann Petit, Guillaume Montay, Manuel François,
    Strain rate measurements by speckle interferometry for necking investigation in stainless steel.
    Int. J. of Solids and Structures 51, 540–550.
    Elsevier, 2014.
  74. Carl Labergère, Bruno Guelorget, Manuel François,
    Strain Rate Distribution and Localization Band Width Evolution during Tensile Test.
    International Journal of Solids and Structures 51(23-24), 3944–3961.
    Elsevier, 2014.
  75. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Sébastien Remy,
    Simulation of shot dynamics for ultrasonic shot peening: effects of process parameters.
    International Journal of Mechanical Sciences 82, 179–190.
    elsevier, 2014.
  76. Alexandre Durupt, Sébastien Remy, Guillaume Ducellier, Philippe Pouille,
    Reverse engineering using a knowledge-based approach.
    International Journal of Product Development 19(No.1/2/3), 113–129.
    Inderscience Publishers, 2014.
  77. Jean-Luc Grosseau-Poussard, Mathieu Guerain, Philippe Goudeau, Guillaume Geandier, Benoît Panicaud, Nobumichi Tamura, Martin Kunz, Catherine Dejoie, Jean-Sébastien Micha,
    Relationship between residual stresses and damaging in thermally grown oxide on metals: Raman spectroscopy and synchrotron microdiffraction contributions.
    Advances in Science and Technology 91, 100–107.
    Trans Tech Publications, 2014.
  78. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Preface.
    Advanced Materials Research 996.
    2014.
  79. Hongchang HAN, Xiao-Lu GONG,
    One-Step Green Treatment of Hemp Fiber Used in Polypropylene Composites.
    Polymer Composites DOI: 10.1002/pc.23191, DOI: 10.1002/pc.23191.
    2014.
  80. Carl Labergère, Alain Rassineux, Khemais Saanouni,
    Numerical simulation of continuous damage and fracture in metal-forming processes with 2D mesh adaptive methodology.
    Finite Elements in Analysis & Design 82, 46–61.
    Elsevier, 2014.
  81. Fanjuan Meng, Carl Labergère, Pascal Lafon, Mathieu Duguy, Laurent Daniel,
    Multi-objective optimization based on meta-models of an aeronautical hub including the ductile damage constraint.
    International Journal of Damage Mechanics 23, 1055–1076.
    SAGE, 2014.
  82. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Modelling and numerical simulation of thick sheet double slitting process using continuum damage mechanics.
    International Journal of Damage Mechanics 23, 1150–1167.
    SAGE, 2014.
  83. Yuchen Zhao, Carl Labergère, Benoît Panicaud, Jean-Luc Grosseau-Poussard, Philippe Goudeau,
    Modeling of stress and strain fields induced during the Smart-Cut process on silicon. Influence of different couplings for diffusion of hydrogen at a microscopic scale.
    Advanced Materials Research 996, 707–712.
    Trans Tech Publications, 2014.
  84. Yuchen Zhao, Carl Labergère, Benoit Panicaud, Jean Grosseau-Poussard, Pascal Goudeau,
    Modeling of stress and strain fields induced during the Smart-Cut process on silicon. Influence of different couplings for diffusion of hydrogen at a microscopic scale.
    Advanced Materials research 996, 707–712.
    Materials science and engineering, 2014.
  85. Si-Yuan He, Zong-Ren Jiang, Ge Dai, Yi Zhang, Xiao-Lu Gong,
    Manipulation of TiH2 decomposition kinetics for Two Steps Foaming method.
    Advanced Engineering Materials, 02/2014, 12.
    2014.
  86. Guillaume Ducellier, Pierre-Alain Yvars, Benoît Eynard,
    Managing design change order in a PLM platform using a CSP approach.
    International Journal on Interactive Design and Manufacturing (IJIDeM) 8(3), 151–158.
    Springer Paris, 2014.
  87. Ibrahim Assouroko, Guillaume Ducellier, Philippe Boutinaud, Benoit Eynard,
    Knowledge management and reuse in collaborative product development – a semantic relationship management-based approach.
    International Journal of Product Lifecycle Management 7(1), 54–74.
    Inderscience Publishers, 2014.
  88. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Jean-Luc Grosseau-Poussard,
    Influence of surface mechanical attrition treatment on the oxidation behavior of 316L stainless steel at 750°C.
    Materials Science and Engineering 63, 012014.
    IOP Science, 2014.
  89. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Jean-Luc Grosseau Poussard,
    Influence of surface mechanical attrition treatment (SMAT) on oxidation behavior of 316L stainless steel at 650°c.
    Advanced Materials Research 996, 906–911.
    Trans Tech Publications, 2014.
  90. Akram Alhussein, Marion Risbet, Alexandre Bastien, Jean-Paul Chobaut, David Balloy, Jérôme Favergeon,
    Influence of silicon and addition elements on the mechanical behavior of ferritic ductile cast iron.
    Materials Science and Engineering: A 605, 222–228.
    Elsevier, 2014.
  91. Zhongmeng WEN, Xiao-Lu GONG,
    Influence of ageing effect on the residual stress distribution and mechanical behavior of carbon/epoxy composite laminates.
    Advanced Materials Research 996, 958–963.
    2014.
  92. Amélie Morançais, Mathieu Fèvre, Manuel François, Pascale Kanouté, Serge Kruch,
    Impact of residual stresses on the fatigue behavior of a Nickel‐based superalloy.
    Materials Science Forum 768-769, 747–754.
    Trans Tech Publications, 2014.
  93. Nada Matta, Guillaume Ducellier,
    How to learn from design project knowledge.
    International Journal of Knowledge and Learning 9(1/2), 164–177.
    Inderscience, 2014.
  94. Fabien Lefebvre, Eric Wasniewski, Manuel Francois, J. Cacot, P. Le-Bec, E. Baumhauer, D. Bouscaud, T. Bergey, D. Blaize, D. Gloaguen, A. Cosson, S. Jegou, Y. Cheynet, S. Leray, M. Meheux, J.C. Monvoisin, P. Allain, J.C. Vidal, J.M. Sprauel, P. Goudeau, C. Charles, L. Daflon, C. Fischer, L. Desmas, A. Ouakka, M.J. Moya, Y. Bordiec, H. Hamdi,
    External reference samples for residual stress analysis by X-ray diffraction.
    Advanced Materials Research 996, 221–227.
    Trans Tech Publications, 2014.
  95. F. Lefebvre, E. Wasniewski, Manuel Francois, J. Cacot, P. Le-Bec, E. Baumhauer, D. Bouscaud, T. Bergey, D. Blaize, D. Gloaguen, A. Cosson, S. Jegou, Y. Cheynet, S. Leray, M. Meheux, J.C. Monvoisin, P. Allain, J.C. Vidal, J.M. Sprauel, P. Goudeau, C. Charles, L. Daflon, C. Fischer, L. Desmas, A. Ouakka, M.J. Moya, Y. Bordiec, H. Hamdi,
    External reference samples for residual stress analysis by X-ray diffraction.
    Advanced Materials Research 996, 221–227.
    Trans Tech Publications, 2014.
  96. Xiao-Lu GONG, Zhongmeng WEN, Yishi SU,
    Experimental Determination of Residual Stresses in Composite Laminates [0₂/θ₂]s.
    Advanced Composites Materials DOI: 10.1080/09243046.2014.937136.
    2014.
  97. Houda Yahyaoui, Habib Sidhom, Chedly Braham, Andrzej Baczmanski, Manuel Francois, Wilfrid Seiler,
    Effect of interlamellar spacing on the monotonic behavior of C70 pearlitic steel.
    Advanced Materials Research 996, 88–93.
    Trans Tech Publications, 2014.
  98. Houda Yahyaoui, Habib Sidhom, Chedly Braham, Andrzej Baczmanski, Manule François, Wilfrid Seiler,
    Effect of interlamellar spacing on the monotonic behavior of C70 pearlitic steel.
    Advanced Materials Research 996, 88–93.
    Trans Tech Publications, 2014.
  99. Florent Ilczyszyn, Abel Cherouat, Guillaume Montay,
    Effect of hemp fibre morphology on the mechanical properties of vegetal fibre composite material.
    Advanced Materials Research 875-877, 485–489.
    Trans Tech Publications, Switzerland, 2014.
  100. HongChang HAN, Xiao-Lu GONG,
    Effect of fiber surface modification with different functional groups silane agents on mechanical properties of hemps/Polypropylene composites.
    Applied Mechanics and Materials 470, 23–26.
    2014.
  101. Zhaojun Tao, Felaniaina Rakotovao, Jean-luc Grosseau-Poussard, Benoît Panicaud,
    Determination of stress fields and identification of thermomechanical parameters in a thermally grown oxide under thermal cycling loadings, using advanced models.
    Advanced Materials Research 996, 896–901.
    Trans Tech Publications, 2014.
  102. Felaniaina Rakotovao, Zhaojun Tao, Jean-Luc Grosseau-Poussard, Benoît Panicaud, Gilles Bonnet, Patrick Girault, Mathieu Guerain,
    Determination of residual stress fields in a thermally grown oxide under thermal cycling loadings, using XRD and Raman spectroscopy. Correlations with microstructural states.
    Advanced Materials Research 996, 890–895.
    Trans Tech Publications, 2014.
  103. Yishi Su, Zhiqiang Li, Jiang, Xiao-Lu GONG, Genlian Fan, Di Zhang,
    Computational structural modeling and elastoplastic mechanical properties of carbon nanotube reinforced aluminum matrix composites.
    Materials Science and Engineering A 614, 273–283.
    2014.
  104. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on a titanium alloy.
    Advanced Materials Research 996, 964–968.
    Trans Tech Publications, 2014.
  105. Yugang Li, Pascale Kanouté, Manuel François,
    Characterization of residual stresses and accumulated plastic strain induced by shot peening through simulation of instrumented indentation.
    Advanced Materials Research 996, 367–372.
    Trans Tech Publications, 2014.
  106. Jawad Badreddine, Sébastien Remy, Micoulaut Matthieu, Rouhaud Emmanuelle, Vincent Desfontaine, Pierre Renaud,
    CAD based model of ultrasonic shot peening for complex industrial parts.
    Advances in Engineering Software 76, 31–42.
    Pergamon Press Ltd., 2014.
  107. J. Badreddine, Sebastien Remy, Matthieu Micoulaut, Emmanuelle Rouhaud, V. Desfontaine, P. Renaud,
    CAD based model of ultrasonic shot peening for complex industrial parts.
    Advances in Engineering Software 76, 31–42.
    2014.
  108. Clémence Demangel, Arnaud Poznanski, Véronique Steenhout, Alexandra Levesque, Hicham Benhayoune, Delphine Retraint,
    Benefit of a surface nanocrytallization treatment on Co28Cr6Mo abrasive wear properties.
    Advanced Materials Research 966-967, 435–441.
    Trans Tech Publications, 2014.
  109. Mingchuan Wang, Emmanuelle Rouhaud, Arjen Roos, Benoit Panicaud, Richard kerner, Olivier Ameline,
    Anisotropic elastic behaviour using the four-dimansional formalism of differential geometry.
    Computational Materials Science.
    2014.
  110. Salam Ali, Alexandre Durupt, Pierre-Antoine Adragna,
    A Reverse Engineering For Manufacturing Approach.
    Computer-Aided Design and Applications 11(6), 694–703.
    Taylor and Francis Online, 2014.
  111. Benoit Panicaud, Emmanuelle Rouhaud,
    A frame-indifferent model for a thermo-elastic material beyong the three-dimensional Eulerian and Lagrangean descriptions.
    Continuum Mechanics and Thermodynamics.
    2014.
  112. Julien Gardan, Lionel Roucoules,
    3D printing device for numerical control machine and wood deposition.
    Int. Journal of Engineering Research and Applications 4(Issue 12( Part 6)), 123–131.
    International Journal of Engineering Research and Applications (IJERA), 2014.
  113. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Sébastien Remy, Vincent Desfontaine, Pierre Renaud,
    3D model of shot dynamics for ultrasonic shot peening.
    Material Science Forum 768-769, 503–509.
    Trans tech Publications, 2014.
  114. Guillaume Ducellier, Nada Matta, Yannick Charlot, François Tribouillois,
    Traceability and structuring of cooperative Knowledge in design using PLM.
    International Journal of Knowledge Management Research and Practices 11(4), 53–61.
    Palgrave, 2013.
  115. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Claude Garnier, Laurent Waltz, Clémence Demangel, Gwénaëlle Proust,
    The effect of surface mechanical attrition treatment on low temperature plasma nitriding of an austenitic stainless steel.
    Surface and Coatings Technology 221, 191–195.
    Elsevier, 2013.
  116. F. Lomello, Frederic Sanchette, Frederic Schuster, M. Tabarant, Alain Billard,
    Surface and Coatings Technology Volume 224, 15 June 2013, Pages 77–81 Cover image Influence of bias voltage on properties of AlCrN coatings prepared by cathodic arc deposition.
    Surface and Coatings Technology Volume 224, 77–81.
    Elsevier, 2013.
  117. Xiao-Lu Gong, F. Zhao, D. Zhang,
    Study of Wear Properties of in situ TiB/TiC Reinforced Ti1100 Composites.
    Key Engineering Materials. Vol. 550, 107–113.
    Trans Tech Publications, 2013.
  118. Akram Alhussein, Julien Capelle, Joseph Gilgert, Albert Tidu, Said Hariri, Zitouni Azari,
    Static, dynamic and fatigue characteristics of the pipeline API 5L X52 steel after sandblasting.
    Engineering Failure Analysis 27, 1–15.
    Elsevier, 2013.
  119. Laura Raceanu, Virgil Optasanu, Tony Montesin, Guillaume Montay, Manuel François,
    Shot-peening of pre-oxidized plates of zirconium: Influence of residual stress on oxidation.
    Oxidation of Metals 79(1-2), 135–145.
    Springer, 2013.
  120. Laurent Waltz, Delphine Retraint, Arjen Roos,
    Semi-massive nanocrystallised composites: From the process to mechanical and microstructural investigations.
    Materials Science Forum 762, 487–492.
    Trans Tech Publications, 2013.
  121. Alexandre Durupt, Sébastien Remy, Matthieu Bricogne, Nadège Troussier,
    PHENIX: product history-based reverse engineering.
    International Journal of Product Lifecycle Management 6(3), 270–287.
    Inderscience, 2013.
  122. Ghassan El Chahal, Rafic Younes, Pascal Lafon,
    Optimization of coastal structures: Application on detached breakwaters in ports.
    Ocean Engineering 63(0), 35–43.
    Elsevier, 2013.
  123. Benoît Panicaud, Jean-Luc Grosseau-Poussard, Delphine Retraint, Mathieu Guérain, Li Li,
    On the mechanical effects of a nanocrystallisation treatment for ZrO2 oxide films growing on a zirconium alloy.
    Corrosion Science 68, 263–274.
    Elsevier, 2013.
  124. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Numerical simulation of thick sheet slitting processes: Modelling using continuum damage mechanics.
    AIP Conference Proceedings 1532, 339–344.
    2013.
  125. Yosr Ghozzi, Carl Labergère, Pierre Villon,
    Numerical simulation based on FEM/MLS coupling for solid mechanics.
    Computational Plasticity XII: Fundamentals and Applications - Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013, 843–853.
    2013.
  126. Ali Makke, Olivier Lame, Michel Perez, Jean-Louis Barrat,
    Nanoscale Buckling in Lamellar Block Copolymers: A Molecular Dynamics Simulation Approach.
    Macromolecules 46(19), 7853–7864.
    ACS, 2013.
  127. Fanjuan Meng, Carl Labergère, Pascal Lafon, Laurent Daniel,
    Multi-objective optimization of gear forging process based on adaptive surrogate meta-models.
    AIP Conference Proceedings 1532, 637–643.
    2013.
  128. Jean-Luc Grosseau-Poussard, Benoît Panicaud, Souhail Ben Afia,
    Modelling of stresses evolution in growing thermal oxides on metals. A methodology to identify the corresponding mechanical parameters.
    Computational Material Science 71, 47–55.
    Elsevier, 2013.
  129. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Léa Le Joncour, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Modelling of grain refinement induced by SMAT process, using a complete numerical chaining methodology.
    Materials Science Forum 762, 295–300.
    Trans Tech Publications, 2013.
  130. M. Apreutesei, P. Steyer, L. Joly-Pottuz, Alain Billard, J. Qiao, S. Cardinal, F. Sanchette, J.-M. Pelletier, C. Esnouf,
    Microstructural, thermal and mechanical behavior of co-sputtered binary Zr-Cu thin film metallic glasses.
    Thin Solid Films.
    Elsevier, 2013.
  131. Yuanyuan Pi, Joël Faure, Guéba Agoda, Caroline Andreazza, Sébastien Potiron, Alexandra Levesque, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Microstructural characterization of Ti-6Al-4V alloy subjected to the duplex SMAT/plasma nitriding.
    Microscopy Research and Technique 76(9), 897–903.
    Wiley, 2013.
  132. Khemais Saanouni, Mohamed Hamed,
    Micromorphic approach of finite gradient-elastoplasticity fully coupled with ductile damage. Formulation and computational aspects.
    International Journal of Solids and Structures 50, 2289–2309.
    Elsevier, 2013.
  133. Nada Matta, Guillaume Ducellier,
    Memory meetings an approach to keep track of project knowledge in design.
    IC3K 2013; KDIR 2013 - 5th International Conference on Knowledge Discovery and Information Retrieval and KMIS 2013 - 5th International Conference on Knowledge Management and Information Sharing, Proc., 336–343.
    2013.
  134. Benjamain Luiset, Frederic Sanchette, Alain Billard, D Schuster,
    Mechanisms of stainless steels erosion by water droplets.
    Wear 303, 459–464.
    Elsevier, 2013.
  135. Zhenming Yue, Celal Soyarslan, Houssem Badreddine, Khemais Saanouni, Erman Takkaya,
    Inverse identification of CDM model parameters for DP1000 steel sheets using a hybrid experimental-numerical methodology spanning various triaxiality ratios.
    Key Engineering materials 554-557, 2103–2110.
    Scientific.Net, 2013.
  136. Yugang Li, Pascale Kanouté, Manuel François,
    Influence of residual stress and work hardening on instrumented indentation.
    Matériaux & Techniques 101(3), 306–311.
    EDP Sciences, 2013.
  137. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Sébastien Remy, Delphine Retraint, Manuel François,
    Effect of the confinement on the properties of ultrasonic vibrated granular gases.
    Granular Matter 15(3), 367–376.
    Elsevier, 2013.
  138. Sami Jelliti, Caroline Richard, Delphine Retraint, Thierry Roland, Mahdi Chemkhi, Clémence Demangel,
    Effect of surface nanocrystallization on the corrosion behavior of Ti-6Al-4V titanium alloy.
    Surface and Coatings Technology 224, 82–87.
    Elsevier, 2013.
  139. Salim LAMRI, Cécile LANGLADE, Guillaume KERMOUCHE,
    Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties.
    Materials Science and Engineering A 560(0), 296–305.
    ELSEVIER, 2013.
  140. Manuel François, Benoît Panicaud, Léa Le Joncour, Andrzej Baczmanski, Ana Paradowska, Sebastian Wronski, Elzbieta Gadalinska,
    Comparison of strain/stress behaviour of a duplex stainless steel between mesoscopic and macroscopic scales by neutron measurements extended to the necking range.
    Thin Solid Films 530, 62–65.
    Elsevier, 2013.
  141. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    Canonical frame-indifferent transport operators with the four-dimensional formalism of differential geometry.
    Computational Materials Science 77.
    2013.
  142. Ganggang Niu, Shudong Sun, Pascal Lafon, Yingfeng Zhang, Junqiang Wang,
    Two decompositions for the bicriteria job-shop scheduling problem with discretely controllable processing times.
    International Journal of Production Research 50(24), 7415–7427.
    2012.
  143. Yuanyuan Pi, Gueda Agoda, Stéphane Potiron, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Surface nanocrystallization of Ti-6Al-4V alloy: microstructural and mechanical characterization.
    Journal of Nanoscience and Nanotechnology 12(6), 4892–4897.
    Elsevier, 2012.
  144. Andrzej Baczmanski, Léa Le Joncour, Anita Gaj, Sebastian Wronski, Manuel François, Benoît Panicaud, Chedly Braham, Anna Paradowska,
    Study of stress localization in polycrystalline grains using self-consistent model and neutron diffraction.
    Philosophical Magazine 92(24), 3015–3035.
    Taylor and Francis, 2012.
  145. Carl Labergère, Jean-Claude Gelin,
    Numerical simulation of sheet hydroforming taking into account analytical pressure and fluid flow.
    Journal of Materials Processing Technology 212(10), 2020–2030.
    2012.
  146. Diego Celentano, Bruno Guelorget, Manuel François, Marcella Cruchaga, Amara Slimane,
    Numerical simulation and experimental validation of the microindentation test applied to bulk elastoplastic materials.
    Modelling and Simulation in Materials Science and Engineering 20(4).
    IOP Science, 2012.
  147. Mazen Issa, Carl Labergère, Khemais Saanouni, Alain Rassineux,
    Numerical prediction of thermomechanical field localization in orthogonal cutting.
    CIRP Journal of Manufacturing Science and Technology 5, 175–195.
    2012.
  148. Boyang Liu, Wang Zhang, Haoming Lu, Di Zhang, Xiao-Lu Gong,
    Novel Ag decorated biomorphic SnO2 inspired by natural 3D nanostructures as SERS substrates.
    Materials letters 66(74), 43–45.
    2012.
  149. Johann Petit, Laurent Waltz, Guillaume Montay, Delphine Retraint, Arjen Roos, Manuel François,
    Multilayer modelling of stainless steel with a nanocrystallised superficial layer.
    Materials Science and Engineering: A 536, 124–128.
    Elsevier, 2012.
  150. Yishi Su, Xiao-Lu Gong,
    Mechanical properties of open-cell metal foams under low-velocity impact loading.
    World Journal of Engineering 9(4), 285–292.
    2012.
  151. Florent Ilczyszyn, Abel Cherouat, Guillaume Montay,
    Mechanical modeling of hemp fibres behaviour using digital imaging treatment.
    Advanced Materials Research 423, 143–153.
    Trans Tech, 2012.
  152. Florent Ilczyszyn, Abel Cherouat, Guillaume Montay,
    Mechanical behaviour and properties characterization of hemp fibres [Caractérisation des propriétés mécaniques de fibres de chanvre].
    Materiaux et Techniques 100(5), 451–457.
    EDP Sciences, 2012.
  153. Shuai Jin, Xiao-Lu Gong,
    Effect of Ultraviolet and Moisture Aging on the Mechanical Properties of Hemp Fibers Composites.
    Applied Mechanics and Materials 226, 1739–1742.
    2012.
  154. Abel Cherouat, Xiao-Lu Gong, Florent Ilczyszyn, S Jin, Guillaume Montay,
    Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers.
    International Journal of Advanced Materials Research 1, 270–273.
    2012.
  155. Manuel François, Benoît Panicaud, Léa Le Joncour, Andrzej Baczmanski, Anna Paradowska, Sebastian Wronski, Elizabetha Gadalinska,
    Comparison of strain/stress behaviour of duplex stainless steels between mesoscopic and macroscopic scales by neutron measurements extended to the necking range.
    Thin Solid Films 530, 62–65.
    Elsevier, 2012.
  156. J. Badreddine, S. Remy, M. Micoulaut, Emmanuelle Rouhaud, V. Desfontaine, F. Chateau, G. Doubre-Baboeuf, P. Renaud,
    Cad based simulation of ultrasonic shot peening process.
    Proceedings of International Design Conference, DESIGN DS 70, 373–380.
    2012.
  157. Benoît Panicaud,
    Application of Clifford algebra Cl3(C) to continuum and engineering mechanics.
    Acta Mechanica 223, 2493–2507.
    Springer, 2012.
  158. Guillaume Herlem, Pierre-Antoine Adragna, Guillaume Ducellier, Alexandre Durupt,
    An extension of the Core Product Model for the maturity management of the Digital Mock Up: use of graph and knowledge to describe mechanical parts.
    International Journal of Product Lifecycle Management.
    Inderscience Publishers, 2012.
  159. Yishi Su, Xiao-Lu Gong,
    An analytical stress-strain model for open-cell metal foam.
    Journal of porous media 15(12), 1137–1145.
    2012.
  160. Madjid Almansba, Khemais Saanouni, Naceur Hannachi,
    A simple damage-gradient enhanced elastoplastic formulation and its numerical implementation.
    Mechanics and Industry 13(2), 97–110.
    2012.
  161. Ibrahim Khoury, Pascal Lafon, Laurence Giraud-Moreau, Laurent Daniel,
    Towards an optimization methodology of a rough forged part taking into account ductile damage.
    International Journal on Interactive Design and Manufacturing 5(4), 213–225.
    2011.
  162. Benoit Panicaud, Khemais Saanouni, Andrzej Baczmanski, Manuel François, Lionel Cauvin, Lea Lejoncour,
    Theoretical modelling of ductile damage in Duplex stainless steels- Comparison between two micro-mechanical elastoplastic approaches..
    Computational Materials Science 50, 1908–1916.
    2011.
  163. Shuai Jin, Xiao-Lu Gong,
    Study of mechanical properties and performance of aging hemp fibers.
    world Jurnal of Engineering 8(4), 225–330.
    2011.
  164. Fei Zhao, Xiao-Lu Gong, Di Zhang,
    Strengthening mechanism of in-situ TiB/TiC reinforced Ti1100 composites.
    World Journal of Engineering 8, 1335–133.
    2011.
  165. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Simulation and experimental approach for shot velocity evaluation in ultrasonic shot peening.
    Mécanique et Industries 12, 223–229.
    EDP Sciences, Les Ulis, FRANCE, 2011.
  166. Mazen Issa, Khemais Saanouni, Carl Labergère, Alain Rassineux,
    Prediction of serrated chip formation in orthogonal metal cutting by advanced adaptive 2D numerical methodology.
    International Journal of Machining and Machinability of Materials 9(3/4), 295–315.
    2011.
  167. Yishi Su, Xiao-Lu Gong,
    Porosity predication with microstructural method for open-cell aluminium foam.
    Journal Special Topics and Reviews in Porous Media 2(1), 65–72.
    2011.
  168. Thomas Paris, Khemais Saanouni,
    Numerical integration of elasto-viscoplastic-damage constitutive equations under plane stress condition.
    European Journal of Computational Mechanics 20(5/6), 341–368.
    2011.
  169. A. Baczmanski, Léa Le Joncour, Benoît Panicaud, Manuel Francois, C. Braham, A.M. Paradowska, S. Wronski, S. Amara, R. Chiron,
    Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture.
    Journal of Applied Crystallography 44(5), 966–982.
    2011.
  170. Anita Gaj, Léa Le Joncour, Andrzej Baczmanski, Sebastian Wronski, Benoît Panicaud, Manuel François, Chedly Braham, Anna Paradowska,
    Localization of stresses in polycrystalline grains measured by neutron diffraction and predicted by selfconsistent model.
    Materials Science Forum 681, 103–108.
    Trans Tech Publications, 2011.
  171. Johann Petit, Guillaume Montay, Manuel François,
    Localisation phenomenon investigation on SMATed stainless steel samples by speckle interferometry.
    Strain 47(4), 363–371.
    2011.
  172. J. Elgueder, L. Roucoules, Emmanuelle Rouhaud, F. Cochennec,
    Integration of residual stresses in the design of mechanical parts.
    Materials Science Forum 681, 255–260.
    2011.
  173. Alix Bonaventure, Danielle Ayrault, Guillaume Montay, Vincent Klosek,
    Evaluation of residual stresses in dissimilar weld joints.
    Materials Science Forum 681, 182–187.
    2011.
  174. Delphine Retraint,
    Effet d'une couche superficielle nanostructurée sur les propriétés mécaniques de pièces métalliques.
    Matériaux et Techniques 99(1), 101–104.
    2011.
  175. Laurent Waltz, Delphine Retraint, Arjen Roos, Claude Garnier, Patrick Olier,
    Effect of interfacial oxidation occurring during the duplex process combining surface nanocrystallisation and co-rolling.
    Surface & coatings technology 205, 4608–4613.
    2011.
  176. Benoît Panicaud,
    Clifford algebra Cl3(C) for applications to field theories.
    International Journal of Theoretical Physics 50(10), 3186–3204.
    Springer, 2011.
  177. Julien Gardan, Lionel Roucoules,
    Characterisation of beech wood pulp towards sustainable rapid prototyping.
    International Journal of Rapid Manufacturing 2(4), 215–233.
    Inderscience publishers, 2011.
  178. Carl Labergère, Sebastien Remy, Pascal Lafon, A. Delespierre, Laurent Daniel, G. Kang,
    Benchmark of a forging process with a hammer: Comparison between fem simulation results and real part shapes using 3D digitising scanner.
    Mecanique et Industries 12(3), 215–222.
    2011.
  179. Benoît Panicaud, Ludovic Cauvin, Léa Le Joncour, Andrzej Baczmanski, Khémaïs Saanouni, Manuel François,
    Analysis of ductile damage – Comparison between micromechanical models an neutron diffraction experiments.
    Materials Science Forum 681, 91–96.
    Trans Tech Publications, 2011.
  180. T. Dupont, Ph. Leclaire, Olivier Sicot, Xiao-Lu Gong, R. Panneton,
    Acoustic properties of air-saturated porous materials containing dead-end porosity.
    Journal of applied physics 110(9), 94903.
    2011.
  181. Denis Sornin, Khemais Saanouni,
    About elastoplastic non-local formulations with damage gradients.
    International Journal of Damage Mechanics 20(6), 845–875.
    Sage, 2011.
  182. Ganggang Niu, Shudong Sun, Pascal Lafon, HongAn Yang,
    A decomposition approach to job-shop scheduling problem with discretely controllable processing times.
    Science China Technological Sciences 54(5), 1240–1248.
    2011.
  183. Khemais Saanouni, Philippe Lestriez, Carl Labergère,
    2D adaptive simulations in finite thermo-elasto-viscoplasticity with ductile damage : Application to orthogonal metal cutting by chip formation and breaking.
    International Journal of Damage Mechanics 20(1), 23–61.
    Sage, 2011.
  184. Carl Labergère, Alain Rassineux, Khemais Saanouni,
    2D adaptive mesh methodology for the simulation of metal forming processes with damage.
    International Journal of Materials Forming 4(3), 317–328.
    Springer, 2011.
  185. Khemais Saanouni, Philippe Lestriez, Carl Labergère,
    2D adaptive FE simulations in finite thermo-elasto-viscoplasticity with ductile damage: Application to orthogonal metal cutting by chip formation and breaking.
    International Journal of Damage Machanics 20, 23–61.
    2011.
  186. Eric Pairel, Ephraim Goldschmidt, Pierre-Antoine Adragna, Pascal Hernandez, Maurice Pillet,
    The pilot dimensions method: reconciling steering and conformity in workshops.
    International journal of production research 1(14), 1–14.
    2010.
  187. Ibrahim Assouroko, Philippe Boutinaud, Nadège Troussier, Benoît Eynard, Guillaume Ducellier,
    Survey on standards for Product Data Exchange and Sharing: application in CAD/CAE Interoperability.
    International Journal of Design and Innovation Research 5(1), 1–12.
    2010.
  188. Houssem Badreddine, Khemais Saanouni, Abdel Dogui,
    On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming.
    International journal of plasticity 26, 1541–1575.
    2010.
  189. Léa Le Joncour, Benoît Panicaud, A. Baczmański, Manuel Francois, C. Braham, A. Paradowska,
    Large deformation and mechanical effects of damage in aged duplex stainless steel.
    Materials Science Forum 652, 155–160.
    2010.
  190. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier,
    Knowledge Based Reverse Engineering - An approach for Reverse Engineering of a Mechanical Part.
    Journal of Computing and Information Science in Engineering 10, 1–4.
    2010.
  191. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier, Matthieu Bricogne,
    KBRE: A proposition of a reverse engineering process by a KBE system.
    International Journal on Interactive Design and Manufacturing 4(4), 227–237.
    2010.
  192. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier,
    KBRE: A Knowledge Based Reverse Engineering for Mechanical Components.
    Computer Aided Design and Applications 7(2), 279–289.
    2010.
  193. Léa Le Joncour, Benoît Panicaud, A. Baczmański, Manuel Francois, C. Braham, A. Paradowska, S. Wroński, R. Chiron,
    Damage in duplex steels studied at mesoscopic and macroscopic scales.
    Mechanics of Materials 42(12), 1048–1063.
    2010.
  194. Guillaume Montay, Olivier Sicot, Afaf Maras, Emmanuelle Rouhaud, Manuel François,
    Two dimensions residual stresses analysis through incremental groove machining combined with electronic speckle pattern interferometry.
    Experimental Mechanics 49(4), 459–469.
    2009.
  195. Johann Petit, Guillaume Montay, Manuel François,
    Strain rate evolution in aluminium alloy measured by ESPI during tensile test.
    Materials Science Forum 614, 155–162.
    2009.
  196. Bruno Guelorget, Manuel François, Guillaume Montay,
    Strain localization band width evolution by electronic speckle pattern interferometry strain rate measurement.
    Scripta Materialia 60(8), 647–650.
    2009.
  197. Serge Samper, Pierre-Antoine Adragna, Hugues Favreliere, Maurice Pillet,
    Modelling of 2D and 3D assemblies tacking into account form errors of plane surfaces.
    Journal of Computing and Information Science in Engineering 9, 1–18.
    2009.
  198. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    High Strength Nanocrystallized Multilayered Structure Obtained By SMAT And Co-rolling.
    Materials science forum 614, 249–254.
    2009.
  199. Z Liu, T Fan, D Zhang, Xiao-Lu Gong, J Xu,
    Hierarchically porous ZnO with high sensitivity and selectivity to H2S derived from biotemplates.
    Sensors and Actuators, B:Chemical 136, 499–509.
    2009.
  200. Juha Uusitalo, Pentti Karjalainen, Delphine Retraint, Mikko Palosaari,
    Fatigue properties of steels with ultrasonic attrition treated surface layers.
    Materials science forum 604-605, 239–248.
    scientific.net, 2009.
  201. He Siyuan Gong Xl, He Deping,
    Effect of through-hole on porous aluminium alloy compressive mechanical properties.
    Chinese Journal of Materials Research 2009 23(4), 380–386.
    2009.
  202. Sébastien Rouquette, Emmanuelle Rouhaud, Manuel François, Arjen Roos, Jean-Louis Chaboche,
    Coupled thermo-mechanical simulations of shot impacts: Effects of the temperature on the residual stress field due to shot peening.
    Journal of materials processing technology 209(8), 3879–3886.
    2009.
  203. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Combination of surface nanocrystallization and co-rolling: Creating multilayer nanocrystalline composites.
    Scripta materialia 60(1), 21–24.
    2009.
  204. Hachmi Ben Daly, Neïla Hfaiedh, Monder Zidi, Bruno Guelorget, Rachid Boukhili,
    Nanoindentation of dry and aged pultruded composites containing fillers and low profile additives.
    Polymer composites 29(11), 1218–1226.
    2008.
  205. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier, Benoit Eynard,
    From a 3D point cloud to an engineering CAD model: A knowledge-product-based approach for reverse engineering.
    Virtual and physical prototyping 3, 51–59.
    2008.
  206. Houssem Badreddine, Carl Labergere, Khemais Saanouni, Wajdi Rajhi, Alain Rassineux, Dominic Kircher,
    elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    Int. J. of Metal Forming 1, 109–112.
    Springer, 2008.
  207. Nikolaz Garsot, Abel Cherouat, Yu Liu, Xiao-Lu Gong,
    Compressive Behavior of Porous Metal/Polymer Composite: Experiment and Numerical Modeling.
    POROUS METALS AND METALLIC FOAMS: METFOAM 2007 1, 391–394.
    2008.
  208. Nicolas Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Compressive Behavior of Porous Metal/Polymer Composite: Experiment and Numerical Modeling.
    POROUS METALS AND METALLIC FOAMS: METFOAM 2007 METFOAM 2007, 391–394.
    2008.
  209. Khemais Saanouni, Houssem Badreddine, Muhammad Ajmal,
    advances in virtual metal forming including the ductile damage occurrence. Application to 3D sheet metal deep drawing.
    Journal of engineering materials and technology 130, 1–11.
    2008.
  210. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, Christian Vial-Edwards, Ignacio Lira,
    Strain and strain rate measurement during the bulge test by electronic speckle pattern interferometry.
    Journal of Materials Processing Technology 184(1-3), 428–435.
    2007.
  211. Zhaoting Liu, Tongxiang Fan, Jiajun Gu, Di Zhang, Xiao-Lu Gong, Qixin Guo, Jiaqiang Xu,
    Preparation of Porous Fe from Biomorphic Fe2O3 Precursors with Wood Templates.
    Materials Transition 48(4), 878–881.
    2007.
  212. Bruno Guelorget, Manuel François, Jian Lu,
    Microindentation as a local damage measurement technique.
    Materials letters 61, 34–36.
    2007.
  213. Matthieu Micoulaut, Sergei Mechkov, Delphine Retraint, Pascal Viot, Manuel François,
    Granular gases in mechanical engineering : on the origin of heterogeneous ultrasonic shot-peening.
    Granular Matter 9(1-2), 25–33.
    2007.
  214. Bruno Guelorget, Manuel François, Cheng Liu, Jian Lu,
    Extracting the plastic properties of metal materials from microindentation tests: experimental comparison of recently published methods.
    Journal of materials research 22(6), 1512–1519.
    2007.
  215. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Enhanced mechanical behaviour of a nanostructured stainless steel and its thermal stability.
    Materials science and engineering 524-525, 281–288.
    2007.
  216. Houssem Badreddine, Khemais Saanouni, Abdelwahab Dogui, Amen Gahbich,
    elastoplasticité anisotrope non normale en grandes deformations avec endommagement. Application à la mise en forme de tôles minces.
    Revue Europeenne de Mecanique Numérique 16(41826), 913–940.
    2007.
  217. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, Christian Vial-Edwards, Ignacio Lira,
    Analysis of plastic strain localization by a combination of the speckle interferometry with the bulge test.
    Optics and Lasers in Engineering 45(1), 222–228.
    2007.
  218. Yu Liu, Xiao-Lu Gong,
    Study on the Compressive behavior and energy absorption of Metal Porous Polymer Composite (MPPC) with an interpenetrating network structure.
    Transaction of nonferrous metals 16, 439–443.
    2006.
  219. Bruno Guelorget, Manuel François, Christian Vial-Edwards, Guillaume Montay, Laurent Daniel, Jian Lu,
    Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset.
    Materials Science and Engineering A 415(1-2), 234–241.
    2006.
  220. Abel Cherouat, Nabil Belamri, Khémais Saanouni, Philippe Autesserre,
    Residual stresses in 3D sheet metal guillotining using a coupled finite elastoplastic damage model.
    Materials science forum -1, 89–94.
    2006.
  221. Guillaume Montay, Akim Cherouat, Jian Lu,
    Residual stress analysis in crankshaft using the hole drilling method.
    Materials Science Forum 524-525, 537–542.
    2006.
  222. Mourad Khelifa, Khémaïs Saanouni, Houssem Badreddine, Amen Gahbich, Abdelwahab Dogui,
    Plasticité anisotrope couplée à un endommagement ductile. Application au gonflement hydraulique de tôles minces..
    Revue Europeenne de Mecanique Numérique 15(41858), 891–908.
    2006.
  223. Benoît Eynard, Thomas Gallet, Lionel Roucoules, Guillaume Ducellier,
    PDM System Implementation based on UML.
    Mathematics and computers in simulation 70(-1), 330–342.
    2006.
  224. Abel Cherouat, Houman Borouchaki, Khémaïs Saanouni, Parick Laug,
    Numerical Methodology for Metal Forming Processes Using Elastoplastic Model with Damage Occurrence.
    Journal of materials science & technology 22(2), 279–283.
    2006.
  225. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment.
    Scripta materialia 54, 1949–1954.
    2006.
  226. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Effect of surface nanocrystallization on tribological properties of stainless steel.
    Materials science forum 524-525, 717–722.
    2006.
  227. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    Material Science Forum 524, 813–817.
    2006.
  228. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by Speckle Interferometry.
    Materials Science Forum 524-525, 465–470.
    2006.
  229. Jean-François Mariage, Khémaïs Saanouni, Philippe Lestriez, Abel Cherouat,
    Virtual metal forming with damage occurrence using adaptive remeshing.
    International journal of forming processes 8(-1), 291–310.
    2005.
  230. Guillaume Montay, Jacek Bulhak, Yves Surrel, Alain Vautrin, Jian Lu,
    Use of full field of strains found by grating shearography to determine residual stress.
    Journal of Strain Analysis for Engineering Design 40(7), 621–630.
    2005.
  231. Mohammed Amen Gahbiche, Ammari, Tarek Benameur, Manuel François, Bruno Guelorget, Abdel Dogui,
    Textures and mechanical responses with strain path in Fe PO4.
    International journal of forming processes 8(2), 0–0.
    2005.
  232. S.Y. He, Xiao-Lu Gong, F. Chen,
    Sound absorption property of porous aluminum.
    Journal of Porous Media 8(6), 1–9.
    2005.
  233. Laurence Giraud-Moreau, Houman Borouchaki, Abel Cherouat,
    Remaillage adaptatif pour la mise en forme des tôles minces.
    Comptes Rendus de l'Académie des Sciences. Série II B, Mécanique, Physique, Astronomie 333, 371–378.
    2005.
  234. Abel Cherouat, Khémaïs Saanouni, Houman Borouchaki, Patrick Laug,
    Numerical simulation of an hexnut forming process with damage effect.
    International journal of forming processes 8(-1), 311–332.
    2005.
  235. Céline Pile, Manuel François, Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Modelling of ultrasonic shot-peening process.
    Materials science forum 490, 67–72.
    2005.
  236. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of residual stresses on the mechanical behavior of composite laminate materials.
    Advanced Composites Materials 14(4), 319–342.
    2005.
  237. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of residual stresses on the mechanical behavior of composite laminate materials.
    Advanced Composites Materials 14(4), 319–342.
    2005.
  238. Matthieu Micoulaut, Serguei Mechkov, Delphine Retraint, Pascal Viot, Manuel François,
    Granular gases in mechanical engineering : on the origin of heterogeneous ultrasonic shot-peening.
    ArXiv : condensed matter 9(1-2), 0–6.
    2005.
  239. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Generation of nanostructures on 316L stainless steel and its effect on mechanical behavior.
    Materials science forum 490, 625–630.
    2005.
  240. Céline Pilé, Delphine Retraint, Manuel François, Jian Lu,
    Effect of very high stress levels on the fatigue life of a TiAl based alloy.
    Materials science forum 490, 418–423.
    2005.
  241. Mourad Khelifa, Houssem Badreddine, Nabil Belamri, Amen Gahbiche, Khémaïs Saanouni, Abel Cherouat, Abdel Dogui,
    Effect of anisotropic plastic flow on the ductile damage evolution in hydro bulging test of thin sheet metal.
    International journal of forming processes 8(-1), 271–289.
    2005.
  242. Guillaume Montay, Olivier Sicot, X.-L. Gong, Akim Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Materials Science Forum 490-491, 533–538.
    2005.
  243. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Material Science Forum 490, 533–539.
    2005.
  244. Jian Luo, Guillaume Montay, Jian Lu,
    An advanced residual stress determination for 3D cylinder structure.
    Materials Science Forum 490-491, 62–66.
    2005.
  245. Houman Borouchaki, Patrick Laug, Abel Cherouat, Khémaïs Saanouni,
    Adaptive remeshing in large plastic deformations.
    International journal for numerical methods in engineering 63, 1–36.
    2005.
  246. Tarek Benameur, Khalil Hajlaoui, Alain Reza Yavari, Bruno Guelorget, Manuel François,
    synchrotron radiation and instrumented indentation studies of compressive plastic deformation in Zr-based bulk metallic glasses.
    Journal of Metastable and Nanocrystalline Materials -1, 425–434.
    2004.
  247. Guillaume Montay, Akim Cherouat, Amir Nussair, Jian Lu,
    Residual stresses in coating technology.
    Journal of Materials Science and Technology 20(SUPPL.), 81–84.
    2004.
  248. Philippe Lestriez, Khémaïs Saanouni, Jean-François Mariage, Abel Cherouat,
    Numerical prediction of damage in metal forming process including thermal effects.
    International journal of damage mechanics 13(1), 59–80.
    2004.
  249. Khémaïs Saanouni, Jean-François Mariage, Abel Cherouat,
    Numerical prediction of central bursting in axisymmetric cold extrusion by continuum damage mechanics.
    Computers & structures 82(27), 2309–2332.
    2004.
  250. Xiao-Lu Gong, Y. Liu, S.-Y. He, Jian Lu,
    Manufacturing and low-velocity impact response of a new composite material: Metal Porous Polymer Composite (MPPC).
    Journal of Materials Science and Technology 20, 65–68.
    2004.
  251. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the experimental parameters on the determination of residual stresses by using the incremental hold-drilling method.
    Composites science and technology 64, 171–180.
    2004.
  252. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the experimental parameters on the determination of residual stresses by using the incremental hold-drilling method.
    Composite Sciences and Technology 64, 171–180.
    2004.
  253. Abel Cherouat, Yq Guo, Khémaïs Saanouni, Ym Li, K Debray, G Loppin,
    Incremental versus inverse numerical approaches for ductile damage prediction in sheet metal forming.
    International journal of forming processes 7(-1), 2309–2332.
    2004.
  254. Guillaume Montay, Akim Cherouat, Claude Garnier, Jian Lu,
    Determining Residual Stress in Spherical Components: A New Application of the Hole-Drilling Method.
    Journal of Testing and Evaluation 32(1), 73–79.
    2004.
  255. Guillaume Montay, Abel Cherouat, Claude Garnier, Jian Lu,
    Determining residual stress in spherical component: a new application of the hole drilling method.
    Journal of testing and evaluation 32(1), 73–79.
    2004.
  256. Thierry Roland, Min Ya, Delphine Retraint, Ke Lu, Jian Lu,
    A new multilayered nanostructured composite material produced by assembling SMA-treated thin plates.
    Journal of materials science and technology 20, 55–58.
    2004.
  257. Sébastien Charles, Benoît Eynard, Guillaume Ducellier, Lin Li, Xavier Rakotomamonjy,
    Standardisation des échanges de modèles géométriques 3D paramétrés non figés.
    Revue internationale de CFAO et d'informatique graphique 18(4), 389–407.
    2003.
  258. Abel Cherouat, Khémaïs Saanouni,
    Numerical simulation of sheet metal blanking process using a coupled finite elastoplastic damage modelling.
    International Journal of Forming Processes 6(1), 6107–32.
    2003.
  259. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    Nano-scratching process and fracture mechanism of amorphous carbon fims.
    Wear 254, 1032–1036.
    2003.
  260. Khémaïs Saanouni, Nabil Belamri, Mourad Khelifa, Houssem Badreddine, Abel Cherouat,
    Finite anisotropic plastic flow with ductile damage for sheet metal forming simulation.
    Computational Fluids and Solids Mechanics 1, 611–614.
    2003.
  261. Houman Borouchaki, Abel Cherouat,
    Drapage géométrique des composites.
    Comptes Rendus de l'Académie des Sciences. Série II B, Mécanique, Physique, Astronomie, 437–442.
    2003.
  262. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of residual stress in composite laminates using the incremental hole-drilling method.
    Journal of Composite Materials 37(9), 831–844.
    2003.
  263. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of residual stress in composite laminates using the incremental hole-drilling method.
    Journal of Composite Materials 37(9), 831–844.
    2003.
  264. Houman Borouchaki, Abel Cherouat,
    Une nouvelle approche géométrique pour le drapage des structures composites.
    Revue des composites et des matériaux avancés 12(3), 407–421.
    2002.
  265. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Study of residual stresses in composite laminates by the finite element method and experimental analysis.
    Journal of Material Science Forum 404-407, 925–934.
    2002.
  266. Akim Cherouat, Guillaume Montay, Jian Lu,
    Study of residual stresses in complex parts by experimental and numerical methods.
    Materials Science Forum 404-407, 251–256.
    2002.
  267. Houman Borouchaki, Abel Cherouat, Khémaïs Saanouni, Patrick Laug,
    Remaillage en grande déformations. Application à la mise en forme de structures 2 D.
    Revue européenne des éléments finis 11(1), 57–79.
    2002.
  268. Emmanuelle Rouhaud, D. Deslaef,
    Influence of shots' material on shot peening, a finite element model.
    Materials Science Forum 404-407, 153–158.
    2002.
  269. Abel Cherouat, Khémaïs Saanouni, Y Hammi,
    Improvment of forming process of a 3 D complex part with respect to damage occurence.
    International journal of mechanical sciences 44, 2427–2446.
    2002.
  270. Delphine Retraint, Claude Garnier, Bruno Guelorget, Jian Lu,
    Improvement of the fatigue behaviour of an automotive part using a new mechanical treatment.
    Materials science forum 404(7), 463–468.
    2002.
  271. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Generation of extremely hight stress levels in a TiAl based alloy.
    Materials science forum 404, 89–94.
    2002.
  272. Guillaume Montay, Akim Cherouat, Jian Lu, Luc Bianchi, Nicolas Baradel,
    Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi layer materials : infLuence of temperature and substrate on ZrO2-Y2-O3 8 wt.% coatings.
    Journal of Surface and Coating Technology 155(2-3-4), 152–160.
    2002.
  273. Houman Borouchaki, Abel Cherouat, Patrick Laug, Khémaïs Saanouni,
    Adaptive remeshing for ductile fracture prediction in metal forming.
    Comptes Rendus de l'Académie des Sciences.Série II B, Mécanique,physique,astronomie. 330, 709–716.
    2002.
  274. Abel Cherouat, Jean Louis Billoet,
    Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics.
    Journal of materials processing technology 118, 460–471.
    2001.
  275. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Influence of the residual stresses on the mechanical behaviour of advanced composite parts.
    Journal of Neutron Research 9(-1), 319–330.
    2001.
  276. Zhu Wu, Guillaume Montay, Jian Lu,
    High sensitivity moiré interferometry and incremental hole-drilling method for residual stress measurement [Mesure des contraintes résiduelles par la technique de l'interférométrie de moiré de trés grande sensibilité et la méthode du perçage incréental].
    Comptes Rendus de l'Academie de Sciences - Serie IIb: Mecanique 329(8), 585–593.
    2001.
  277. Yong Han, Kewei Xu, Guillaume Montay, Jian Lu,
    Evaluation of nanostructured carbonated hydroxyapatite coatings formed by a hybrid process of plasma spraying and hydrothermal synthesis.
    Journal of Biomedical Materials Research 55(4), 596–602.
    2001.
  278. Delphine Retraint, Jian Lu,
    Study of residual stress distribution by the combination of three techniques in an aluminium based MMC.
    Materials science forum 347(3), 498–503.
    2000.
  279. A Laksimi, A Ahmed Benyahia, Xiao-Lu Gong, S Benmedakhene,
    Mode II delamination in + - q laminates : Analysis and optimisation.
    Advanced Composite Materials 9(3), 207–221.
    2000.
  280. A Laksimi, A Ahmed Benyahia, M.L Benzeggagh, Xiao-Lu Gong,
    Initiation and bifurcation mechanics in multi-directional laminates.
    Composites science and technology 60, 597–604.
    2000.
  281. Shabnam Rasouli Yazdi, Delphine Retraint, Jian Lu,
    Experimental Study of Residual Stress Distribution in Quenched Parts by the Incremental Large Hole Drilling Method and by the Neutron Diffraction Method.
    Journal of testing and evaluation 28(4), 282–289.
    2000.
  282. Xiao-Lu Gong, Xiao-Jing Gong, A Laksimi, M.L Benzeggagh,
    Application of Tsai-Wu criterion to notched and unnotched composite laminates under torque loading.
    Journal of composite materials 34(6), 460–478.
    2000.
  283. D. Deslaef, Emmanuelle Rouhaud, S. Rasouli-Yazdi,
    3D finite element models of shot peening processes.
    Materials Science Forum 347, 241–246.
    2000.
  284. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    Annales des composites 1, 65–69.
    1999.
  285. Shabnam Rasouli Yazdi, Delphine Retraint, Jian Lu,
    Study of through thickness residual stress by numerical end experimental techniques.
    Journal of strain analysis for engineering design 33(6), 449–458.
    1998.
  286. Xiao-Lu Gong, Abdel Laksimi, Malk Benzeggagh,
    Nouvelle approche de l'émission acoustique et son application à l'identification des mécanismes d'endommagement dans les matériaux composites.
    Revue des composites et des matériaux avancés 8(1), 7–23.
    1998.
  287. Jian Lu, Delphine Retraint,
    A review of recent developments and applications in the field of X-ray diffraction for residual stress study.
    Journal of strain analysis for engineering design 33(2), 127–136.
    1998.
  288. Xiao-Lu Gong, A Laksimi, D Lai, M.L Benzeggagh,
    Stress analysis in unidirectional composite plates under torque loading : Experimental observation.
    Journal of Reinforced Plastics and Composites 14(1), 29–44.
    1995.
  289. A Laskimi, Xiao-Lu Gong, M.L Benzeggagh,
    Damage mechanisms analysis in a centrally notched Glass-fiber/Epoxy plate.
    Composites science and technology 52, 85–91.
    1994.

Unindexed peer-reviewed journal articles

  1. Hui Sun, Mohammad Arab Pour Yazdi, Cedric Ducros, Sheng-Chi Chen, Eric Aubry, Chao-Kuang Wen, Jang-Hsing Hsieh, Frederic Sanchette, Alain Billard,
    Thickness-dependent optoelectronic properties of CuCr0.93Mg0.07O2 thin films deposited by reactive magnetron sputtering.
    Materials Science in Semiconductor Processing 63, 295–302.
    2017.
  2. Altmeyer G., Benoit Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Viscoelasticity behavior for finite deformations, using a consistent hypoelatic model based on Rivlin materials.
    Continuum Mechanics and Thermodynamics 28, 1741–1758.
    2016.
  3. Hui Sun, Chao-Kuang Wen, Sheng-Chi Chen, Tung-Han Chuang, Mohammad Arab Pour Yazdi, Frederic Sanchette, Alain Billard,
    Microstructures and optoelectronic properties of CuxO films deposited by high-power impulse magnetron sputtering.
    Journal of Alloys and Compounds 688 part B, 672–678.
    2016.
  4. Yishi Su, Dai Zhang, Xiao Lu Gong, M. Shen.,
    Mechanical behavior in bending deformation of thermoplastic composite laminates with different stacking sequences.
    Journal of Composite Materials 50(8), 1037–1048.
    2016.
  5. Chengheri Bao, Manuel François, Léa Le Joncour,
    Influence of Specimen Geometry on Strain Localization Phenomena in Steel Sheets.
    Applied Mechanics and Materials 784, 514–519.
    Trans Tech Publications, 2015.
  6. Jawhar Elgueder, Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Product-process interface for manufacturing data management as a support for DFM and virtual manufacturing.
    International Journal on Interactive Design and Manufacturing 4(4), 251–258.
    2010.
  7. Sébastien Rouquette, Emmanuelle Rouhaud, Arjen Roos, Hervé Pron, Manuel François, Christian Bissieux,
    Thermomecanical modeling of a steel plate impacted by a shot and experimental validation.
    Materials science forum 524, 167–172.
    2006.
  8. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    Materials science forum 524, 161–166.
    2006.
  9. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by speckle interferometry.
    Materials science forum 524, 465–470.
    2006.
  10. Choumad Ould, Emmanuelle Rouhaud, Manuel François, Jean-Louis Chaboche,
    A kinematic hardening finite elements model to evaluate residual stresses in shot-peened parts, local measurements by X-ray diffraction.
    Materials science forum 524, 161–166.
    2006.
  11. Philippe Lestriez, Khémaïs Saanouni, Abel Cherouat,
    Simulation numérique de la coupe orthogonale par couplage thermique comportement-endommagement en transformations finies.
    Mécanique industrielle et matériaux 6(3), 297–307.
    2005.
  12. Ilyes Ben Naceur, Abel Cherouat, Houman Borouchaki, Jean Marie Bachmann,
    Modélisation mécanique et numérique de la mise en forme de structures souples avec remaillage adaptatif.
    Mécanique industrielle et matériaux 6(3), 321–329.
    2005.
  13. Abel Cherouat, Houman Borouchaki, Jean Louis Billoet,
    Geometrical and mechanical draping of composite fabric.
    Revue européenne des éléments finis 14(-1), 693–707.
    2005.
  14. Ilyes Ben Naceur, Houman Borouchaki, Abel Cherouat,
    Caractérisation et modélisation de l’aptitude à la déformation des structures souple.
    Revue des Composites et des Matériaux Avancés 13(3), 3231–240.
    2003.
  15. Y.Q Guo, Khémaïs Saanouni, Abel Cherouat, Y.M Li, G Loppin, K Debray,
    Two methodologies for the simulation of ductile damage in sheet metal forming processes.
    Journal of Plasticity Engineering 9(4), 47–55.
    2002.
  16. Abel Cherouat, Guillaume Montay, Jian Lu,
    Study of residual stresses in complex parts by experimental and numerical methods.
    Journal of Material Science Forum -1, 251–256.
    2002.
  17. Philippe Lestriez, Abel Cherouat, Jean-François Mariage, Khémaïs Saanouni,
    Simulation numérique du couplage thermomécanique endommagement ductile application a la mise en forme.
    Journal de physique IV 12, 353–360.
    2002.
  18. J.F Mariage, Khémaïs Saanouni, J.F Lestriez, Abel Cherouat,
    Numerical Simulation of ductile damage in metal forming processes : part II application.
    International journal of forming processes 5, 377–390.
    2002.
  19. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Numerical Simulation of ductile damage in metal forming processes : part I a simple predictive model.
    International journal of forming processes 5(-1), 363–376.
    2002.
  20. Guillaume Montay, Abel Cherouat, Jian Lu, Luc Bianchi, N Baradel,
    Development of the high-precision incremental-step hole-drilling method for the study of residual stress in multi layer materials : influence of temperature and substrate on ZrO2-Y2-O3 8 wt.% coatings.
    Journal of Surface and Coatings Technology 155(-1), 152–160.
    2002.
  21. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    Analysis of Nano-scratch behavior of diamond like carbon films.
    Surface and Coatings Technology 154(-1), 232–236.
    2002.
  22. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Numerical aspects of finite elastoplasticity with damage for metal forming.
    European Journal of Finite Elements 10(-1), 327–351.
    2001.
  23. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget, Hua Chen,
    Nano-scratch and fretting wear study of DLC coatings for biomedical application.
    Diamond and related materials 10(8), 1448–1456.
    2001.
  24. Guillaume Montay, Akim Cherouat, Jian Lu,
    Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy.
    Journal of Neutron Research 9(2-4), 337–344.
    2001.
  25. Benoit Eynard, Marc Lemercier, Nada Matta,
    Constitution d'une mémoire de projet d'ingénierie mécanique utilisant les technologies Web.
    Document Numérique - Espaces numérique d'information et de coopération, Hermes, volume 5 - n°3/4/2001 5(-1), 155–171.
    2001.
  26. J.L. Billoet, Abel Cherouat,
    Une formulation numérique pour la caractérisation de la déformation des tissus composites par mise en forme.
    Revue Européenne des Eléments Finis 9(5), 561–590.
    2000.
  27. J.L Billoet, Abel Cherouat,
    New numerical model of composite fabric behviour : simulation of manufacturing of thin composite.
    Advanced Composites Latter 9(3), 167–179.
    2000.
  28. Abel Cherouat, J.L Billoet,
    Finite element model for the simulation of preimpregnated woven fabric by deep-drawing and laying-up processes.
    Journal of Advanced Material 32(4), 42–53.
    2000.
  29. Abel Cherouat, Jean-Louis Billoet,
    Une approche avancée pour la modélisation du comportement des préimprégnés lors du formage de pièces composites.
    Revue des composites et des matériaux avancés 9(1), 7–26.
    1999.
  30. Abel Cherouat, J.L. Billoet,
    Modeling and simulation of composite fabrics deformation by shaping process.
    International journal of forming processes 2(4), 225–251.
    1999.
  31. P Boisse, M Borr, K Buet, Abel Cherouat,
    Finite element simulation of textile composite forming including the biaxial fabric behavior.
    Composite Part B Engineering, 453–464.
    1997.
  32. J.C Gelin, Abel Cherouat, P Boisse, H Sabhi,
    Manufacturing of thin composite structures by the RTM process numerical of the shaping operation.
    Composites science and technology -1, 711–718.
    1996.
  33. Abel Cherouat, J.C Gelin, P Boisse, H Sabhi,
    Modelling the glass fiber fabrics process by the finite element method.
    European Journal of Finite Elements 4(2), 182–195.
    1995.
  34. Abel Cherouat, M Borr, J.C Gelin,
    Modélisation du comportement multiaxial des tissus de fibres de verre et applications.
    Annales des Composites 3, 17–25.
    1995.
  35. P Boisse, Abel Cherouat, J.C Gelin, H Sabhi,
    Experimental study and F.E simulation of glass fiber fabric shaping process.
    Polymer composites 16(1), 85–95.
    1995.
  36. P Boisse, Abel Cherouat, J.C Gelin, M. Borr,
    3D numerical simulations of glass fiber fabric deep-drawing.
    Composite Engineering 12(4), 342–359.
    1995.

Journal articles with no peer-review

  1. Emmanuelle Rouhaud, Delphine Retraint,
    Procédés de grenaillage pour pièces forgées.
    La Forge, 16_26.
    2015.

Patents

  1. Timothee Toury, Hong Shen, Marc Lamy De La Chapelle, Bruno Guelorget,
    Structure multicouche comprenant un métal précieux accroché sur un substrat diélectrique, procédé et utilisation associés.
    2010.

Invited conference talks

  1. Akram Alhussein, Sofiane Achache, Frederic Sanchette,
    Super-elastic thin films for biomedical applications.
    2nd Workshop on multifunctional coatings, Nantes-France.
    2016.
  2. Guillaume Montay,
    Effet de la température d’élaboration et du vieillissement sur les contraintes résiduelles.
    4ème colloque Fibres naturelles et Polymères. Troyes 2016..
    2016.
  3. Delphine Retraint,
    Effet d’une couche superficielle nanostructurée sur les propriétés mécaniques et de surface de pièces métalliques.
    Journée sur les "Traitements de surface - Innovations et Procédés" organisée par la maison Innovergne, Clermont Ferrand, 24 mai.
    2016.
  4. Delphine Retraint,
    SMAT: from superficial nanostructure generation to enhanced surface properties.
    The 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD 6).
    2014.
  5. Clémence Demangel, Delphine Retraint,
    Le traitement SMAT, Surface Mechanical Attrition Treatment, au service des biomatériaux.
    4ème SEMINAIRE traitements thermiques & revêtements innovants des matériaux métalliques avancés au service de la performance.
    2014.
  6. Emmanuelle Rouhaud,
    Procédés de traitement de précontraintes et modélisation.
    Les contraintes résiduelles dans les pièces en titane : génération, mesure, effet sur la fatigue, ISAE, Toulouse, 29 janvier.
    2013.
  7. Manuel François, Delphine Retraint, Emmanuelle Rouhaud,
    Mesure des contraintes résiduelles par méthodes optiques.
    Les contraintes résiduelles dans les pièces en titane : génération, mesure, effet sur la fatigue Séminaire, ISAE, Toulouse, 29 janvier.
    2013.
  8. Khemais Saanouni,
    Ductile damage prediction in metal forming processes. Advanced modelling and numerical simulation.
    11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2013), IMR Conference Hall, Shenyang, China, July 6-10.
    2013.
  9. Khemais Saanouni, Mohamed Hamed,
    Advanced micromorphic elatoplastic constitutive equations with various length scales for metal forming simulation.
    USNCCM12: 12th US National Congress on Computational Mechanics, Raleigh, July 23-25, 2013 (USA).
    2013.
  10. Delphine Retraint, Clémence Demangel,
    Nanocristallisation de surface de biomatériaux : une voie pour améliorer leurs propriétés mécaniques et leur résistance à l'usure.
    Journée sur les implants orthopédiques, Strasbourg, France, 29 mars.
    2012.
  11. Delphine Retraint, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Claude Garnier, Clémence Demangel,
    Combined surface treatment: surface nanocrystallisation and nitriding.
    European Conference on Combined treatments to improve surface properties, March 22-23, 2012, Strasbourg, France.
    2012.
  12. Delphine Retraint, Clémence Demangel, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Sami Jelliti, Caroline Richard,
    Biomatériaux : les apports d’un traitement de surface de nanocristallisation.
    Forum Innovation MEDTECH France, Eurexpo Lyon, France, 4-5 avril.
    2012.
  13. Delphine Retraint,
    Amélioration des propriétés mécaniques et de surface par nanocristallisation superficielle (projet NANOSURF).
    7e Assises Recherche & Entreprises - Atelier « Propriétés fonctionnelles des métaux : application du traitement de surface dans le biomédical et l’industrie des transports et de la logistique », Centre des congrès de Reims, 27 mars.
    2012.
  14. Delphine Retraint,
    Surface Mechanical Attrition Treatment (SMAT): from nanostructure formation to enhanced mechanical and wear properties.
    Invited seminar, University of New South Wales, Sydney, February 24.
    2011.
  15. Delphine Retraint, Claude Garnier, Delphine Auzene,
    Nanostructuration des alliages de titane par SMAT (Surface Mechanical Attrition Treatment).
    Journée sur « Les traitements innovants sur les alliages de titane : vers de nouvelles fonctionnalités »,, Saint-Etienne, Octobre 2008.
    2008.
  16. Emmanuelle Rouhaud, Delphine Retraint, Guillaume Montay, L. Roucoules, Manuel François,
    Shot peening processes: Form elaboration to XAO.
    Mechanical Surface treatment, Second French German meeting, Karlsruhe Allemagne, 15 novembre 2006.
    2006.
  17. Emmanuelle Rouhaud, G. Zahalak,
    The distribution-model in muscle mechanics - Coupled contraction and metabolic dynamics.
    Annual conference of the Biomedical Engineering Society (BMES), Philadelphia Etats-Unis, 13-17 octobre 2004.
    2004.
  18. Emmanuelle Rouhaud, G.I. Zahalak,
    A Distribution-Moment Model for Coupled Muscle Mechanics and Metabolic Dynamics.
    Second World Congress of Biomechanics, Amsterdam Hollande, 10-15 juillet 1994 (Conférence plénière)..
    1994.

Proceedings articles indexed in international databases

  1. Mohamed Fares Slim, Akram Alhussein, Frederic Sanchette, Manuel François,
    Determination of Elasticity Constants of Isotropic Thin Films Using Impulse Excitation Technique.
    19th International Conference on Experimental Mechanics and Applications, Madrid-Spain, 26-27 March 2017. 4(3), 734.
    World Academy of Science, Engineering and Technology - International Journal of Aerospace and Mechanical Engineering, 2017.
  2. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy,
    Steel stock analysis in Europe from 1945 to 2013.
    Proceedings of the 23rd Conference on Life Cycle Engineering.
    Elsevier, 2016.
  3. W. Zhu, D. Wang, Benoit Eynard, Matthieu Bricogne, Sébastien Remy,
    Procedural approach for 3D modeling of city buildings.
    IFIP Advances in Information and Communication Technology 467, 137–148.
    2016.
  4. Weijie Liu, Khemais Saanouni, Carl Labergère, Houssem Badreddine, Samuel Forest, Ping Hu,
    Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature.
    MATEC Web of Conferences 80(01002), 7.
    2016.
  5. Pascal Lafon, Pierre Antoine Adragna, Von Dim Nguyen,
    Multi-objective optimization under uncertainty for sheet metal forming.
    MATEC Web of Conferences 80, 10004.
    EDP Sciences, 2016.
  6. Benjamin Sarre, Sylvain Flouriot, Thomas Paris, Benoit Panicaud, Guillaume Geandier,
    Mechanical behavior and fracture mechanisms of titanium alloy welded joint made by LBW.
    Structural Integrity Procedia.
    Elsevier, 2016.
  7. Nada Matta, Guillaume Ducellier, Hassan Atifi,
    Learning from Design projects: How to keep track and learn from knowledge produced in daily activity.
    CEUR Workshop Proceedings 1780, 27–28.
    2016.
  8. Amélie Morançais, Mathieu Fèvre, Manuel Francois, Nicolas Guel, Serge Kruch, Pascale Kanouté, Arnaud Longuet,
    Influence of residual stresses on the fatigue life of a shot-peened nickel-based single crystal superalloy: From measurements to modeling.
    Proceedings of the International Symposium on Superalloys 2016-January, 867–876.
    Huron E.,Glatzel U.,Rae C.,Tin S.,Lewis B.,Seetharaman V.,Hardy M.,Griffin B., 2016.
  9. Cong Cuong Pham, Nada Matta, Alexandre Durupt, Benoit Eynard, Marianne Allanic, Guillaume Ducellier, Marc Joliot, Philippe Boutinaud,
    How to share complex data and knowledge: Application in Bio-Imaging.
    In proceedings of IEEE conferences on Manufacturing, management & control (MIM), 6.
    IEEE, 2016.
  10. Yunlong Zhu, Julien Vaillant, Guillaume Montay, Aurélien Bruyant,
    Generalized lock-in detection applied to lens-less digital holographic interferometry.
    Optics InfoBase Conference Papers Part F8-DH 2016, 3.
    2016.
  11. Zohra Sendi, Hédi Belhadjsalah, Carl Labergere, Khemais Saanouni,
    An Element Free Galerkin method for an elastoplastic coupled to damage analysis.
    MATEC Web of Conferences 80(07005), 7.
    2016.
  12. Evangelia Diamantopoulou, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    MATEC Web of Conferences 80(01001).
    2016.
  13. Ahmad El Samrout, Oussama Braydi, Rafic Younes, François Trochu, Pascal Lafon,
    A new hybrid method to solve the multi-objective optimization problem for a composite hat-stiffened panel.
    THE 6TH INTERNATIONAL CONFERENCE ON METAHEURISTICS AND NATURE INSPIRED COMPUTING, META’2016, WILL HELD IN MARRAKECH (MOROCCO)., 1.
    Sciences Conf, 2016.
  14. Julien Gardan, Ali Makke, Naman Recho,
    A Method to Improve the Fracture Toughness Using 3D Printing by Extrusion Deposition.
    21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy Procedia Structural Integrity.
    2016.
  15. Chuan ZHANG, Feng ZHU, Houssem BADREDDINE, Siyuan HE, Xiao-Lu GONG,
    Simulation of melting process of phase change materials in high mechanical property open-cell metal foams.
    International Conf. on Mech. of Complex Solids and Fluids (ICMCSF) 17-22 mai 2015, Lille, France.
    2015.
  16. Yi Zhang, Siyuan He, Xiao-Lu Gong, Ge Dai, Jin Yu,
    Radial density-graded foam-filled column for crushing performances.
    Fourth Int. Conference on Multifunctional, Hybrid and Nanomaterials. Sitges, Spain, 9-13 March 2015.
    2015.
  17. Yi Zhang, Siyuan He, Xxiao-Lu Gong, Ge Dai, Jin Yu,
    Radial density-graded foam-filled column for crushing performances.
    Fourth Int. Conference on Multifunctional, Hybrid and Nanomaterials. Sitges, Spain, 9-13 March 2015.
    2015.
  18. Feng ZHU, Jerome POULET, Xiao-Lu GONG,
    Numerical simulation of the casting defects of open-cell aluminium foam prepared by negative pressure infiltration.
    Energy & Materials Research Conference (EMR2015), Madrid, Spain, 25 to 27 February 2015.
    2015.
  19. Pham Cong Cuong, Alexandre Durupt, Nada Matta, Benoît Eynard, Guillaume Ducellier,
    Knowledge Sharing using Product Life cycle Management.
    Proceedings of IFIP International Conferences of Advances in Production Management Systems, (APMS’2015), Tokyo, September, 2015., 10.
    Springer, 2015.
  20. Pham Cong Cuong, Alexandre Durupt, Nada Matta, Benoît Eynard, Guillaume Ducellier,
    Knowledge Sharing using PLM application in BioImaging.
    proceedings of International Conference on Engineering Design (ICED’ 2015), Milano, 8.
    Design society, 2015.
  21. Zhongmeng WEN, Xiao-Lu GONG,
    Influence of residual stresses on the damage of composite laminate under tensile loading.
    Second International Conference on Damage Mechanics (ICDM2) Troyes, France, 8-10 July 2015.
    2015.
  22. Nada Matta, Xinghang DAI, François Rauscher, Hassan Atifi, Guillaume Ducellier,
    How to capture Knowledge from project environment?.
    IFIP-International Conferences of Advances in Production Management Systems (APMS’2015), 8.
    Springer, 2015.
  23. Feng ZHU, Jerome POULET, Siyuan HE, Xiao-Lu GONG,
    Effect of the manufacturing parameters on the defects in the open cell aluminum foam.
    Second International Conference on Damage Mechanics (ICDM2) Troyes, France, 8-10 July 2015.
    2015.
  24. Pascal Lafon,
    Critère de décision basé sur les indices de capabilité pour l'optimisation robuste d'un procédé d'emboutissage.
    S09a Procédés de mise en forme.
    AFM, Association Française de Mécanique, 2015.
  25. Chuan ZHANG, Feng ZHU, Houssem BADREDDINE, Xiao-Lu GONG,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    International Conf. on Adv. Composite Mat. (ACM) 19-21 July, 2015 Shanghai, China.
    2015.
  26. Mohamed Ouamer Ali, Florent Laroche, Alain Bernard, Sébastien Remy,
    Toward a methodological knowledge based approach for partial automation of reverse engineering.
    Proceeding of the CIRP Design Seminar 2014, 14 Avril, Milan, Italie.
    CIRP, 2014.
  27. XiaoHui ZHANG, Xiao-Lu GONG, Guillaume MONTAY,
    The influences of compression temperature on the fiber structure and tensile properties of hemp reinforced polypropylene composites.
    International Conference on Energy, Environment and Sustainable Development (EESD 2014) Oct. 25-26, 2014 Nanjing, China.
    2014.
  28. ZhongMeng WEN, Xiao-Lu GONG,
    The influence of residual stresses on the mechanical behaviour of angle-ply composite laminates.
    16th European Conference for Composite Materials (ECCM16).
    Seville, Spain, 2014.
  29. Hassan Diab, Pascal Lafon, Rafic Younes,
    Optimisation of breakwaters design to protect offshore terminal area.
    Proceedings of the IASTED International Conference on Modelling, Simulation and Identification, MSI 2014, 70–75.
    Acta Press, 2014.
  30. Salam Ali, Pierre-Antoine Adragna, Alexandre Durupt,
    Matching algorithm in the Reverse Engineering context.
    Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing.
    2014.
  31. Xinghang DAI, Nada Matta, Guillaume Ducellier,
    Knowledge Discovery in Collaborative Design Projects.
    Advances in Production Management Systems. Innovative and Knowledge-Based Production Management in a Global-Local World - IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014, Proceedings, Part I.
    2014.
  32. Xinghang DAI, Nada MATTA, Guillaume DUCELLIER,
    Knowledge discovery from traceability of design projects.
    Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 18th–20th, 2014, 6.
    Design Society, 2014.
  33. Xinghang DAI, Nada Matta, Guillaume Ducellier,
    Knowledge Classification for Design project memory.
    13th international design conference, 6.
    Thompson Reuters, 2014.
  34. Hongchang HAN, Xiao-Lu GONG,
    Investigation of humidity ageing mechanism of hemp fiber reinforced polypropylene composites.
    16th European Conference for Composite Materials (ECCM16), 22-26 June 2014 Seville, Spain, 8.
    2014.
  35. Souhail Benafia, Delphine Retraint, Benoït Panicaud, Jean-Luc Grosseau Poussard,
    Influence of surface mechanical attrition treatment on the oxidation behavior of 316L stainless steel at 750°C.
    IOP Conference Series: Materials Science and Engineering 63(1), 1–7.
    Institute of Physics Publishing, 2014.
  36. Pierre-Antoine Adragna, Salam Ali, Alexandre Durupt, Von Dim Nguyen, Pascal Lafon,
    Influence of part geometrical tolerancing in the REFM methodology.
    Proceedings of Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing.
    2014.
  37. Zhongmeng WEN, Xiao-Lu GONG,
    Influence of ageing effect on the residual stress distribution and mechanical behavior of carbon/epoxy composite laminates.
    9th European Conference on Residual Stresses (ECRS 9) 7-10 july 2014, Troyes, France.
    2014.
  38. Zhidan Sun, Mahdi Chemkhi, Pascale Kanoute, Delphine Retraint,
    Fatigue properties of a biomedical 316L steel processed by surface mechanical attrition.
    IOP Conference Series: Materials Science and Engineering 63(1), 1–10.
    Institute of Physics Publishing, 2014.
  39. Akram Alhussein, Marion Risbet, Jérôme Favergeon,
    Effect of silicon content and defects on the lifetime of ductile cast iron.
    2nd international symposium on Fatigue Design & Material Defects (FDMD), Paris, 11-13 June 2014 12(04006).
    MATEC Web of conferences - EDP sciences, 2014.
  40. Xinghang DAI, Nada Matta, Guillaume Ducellier,
    Cooperative knowledge discovery in design projects.
    proceedings of IC3K,onference on Knowledge Management and Informaiton System, 2014.
    2014.
  41. Xinghang DAI, Nada Matta, Guillaume Ducellier,
    CKD: a Cooperative Knowledge Discovery Model for Design Project.
    Proceedings of the 2014 Federated Conference on Computer Science and Information Systems.
    2014.
  42. Miriam Kozemjakin da Silva, Romain Allais, Tatiana Reyes, Sebastien Remy, Lionel Roucoules,
    Understanding the implication of an environmental strategy adoption.
    6th international conference on life cycle management, Gothenburg, August 2013, 4.
    2013.
  43. Miriam Kozemjakin Da Silva, Tatiana Reyes, Sebastien Remy,
    On the potential of Design Rationale for Ecodesign.
    20th CIRP Conference on Life Cycle Engineering, Singapore, April 2013, 9–14.
    Springer, Singapore, 2013.
  44. Carl Labergère, Khemais Saanouni, Souhail Benafia, Joel Galmiche, Husein Soulaiman,
    Numerical simulation of fine blanking process using fully coupled advanced constitutive equations with ductile damage.
    11th International Conference on Numerical Methods in Industrial Forming, NUMIFORM’2013 NUMIFORM’2013, July 6-10, 2013, Shenyang, China, 6.
    2013.
  45. Fanjuan Meng, Carl Labergère, Pascal Lafon, Laurent Daniel,
    Multi-objective optimization of gear forging process based on adaptive surrogate meta-models.
    AIP Conference Proceedings 1532, 637–643.
    American Institute of Physics Inc., 2013.
  46. Yosr Ghozzi, Carl Labergère, Khemais Saanouni,
    Modelling and numerical simulation of thick sheets slitting using continuum damage mechanics,.
    11th International Conference on Numerical Methods in Industrial Forming, NUMIFORM’2013 NUMIFORM’2013, July 6-10, 2013, Shenyang, China, 6.
    2013.
  47. Ali Halouani, Fanjaun Meng, Yu-Ming Li, Carl Labergère, Boussad Abbès, Pascal Lafon, Ying-Qiao Guo,
    Forging tool shape optimization using pseudo inverse approach and adaptive incremental approach.
    AIP Conference Proceedings 1532, 95–103.
    American Institute of Physics Inc., 2013.
  48. Saber Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 Barcelona 3-5 September 2013, Spain.
    2013.
  49. Hc Han, Xiao-Lu Gong,
    Effect of fiber surface modification with different functional groups silane agents on mechanical properties of hemps/Polypropylene composite.
    2nd International Conference on Mechanical Engineering, Materials Science and Civil Engineering (2nd ICMEMSCE2013), Oct.25-26, 2013 Beijing, China, 6.
    2013.
  50. Johann Petit, Danièle Wagner, Nicolas Ranc, Guillaume Montay, Manuel François,
    Comparison of different techniques for the monitoring of the Piobert-Lüders bands development.
    13th International Conference on Fracture (ICF13), Beijing 26-30 mai 2013 5, 3797–3809.
    2013.
  51. Von Dim Nguyen, Pierre-Antoine Adragna, Pascal Lafon,
    Assessment of Sensitivity of Numerical Simulation in Sheet Metal Forming Process Applied for Robust Design.
    Lecture Notes in Production Engineering Series - Smart Product Engineering, 493–503.
    Springer Berlin Heidelberg, 2013.
  52. Nada Matta, Guillaume Ducellier,
    An approach to keep track of project knowledge in design.
    Proceedings of the 5th International Conference on Knowledge Management and Information Sharing (IC3K/KMIS), 12.
    IC3K, 2013.
  53. Guillaume Herlem, Guillaume Ducellier, Pierre-Antoine Adragna, Sébastien Remy,
    A reverse engineering method for DMU maturity management : Use of a functional Reeb graph.
    proceedings of the International conference in product lifecycle management (PLM13), 422–431.
    Springer, 2013.
  54. Miriam Kozemjakin da Silva, Emmanuel Guyot, Sebastien Remy, Tatiana Reyes,
    A product model to capture and reuse ecodesign knowledge.
    10th International conference on Product Lifecycle Management, Nantes, July 2013, 220–228.
    Springer, 2013.
  55. Ibrahim Assouroko, Guillaume Ducellier, Benoit Eynard, Philippe Boutinaud,
    Semantic relationship management for knowledge capitalization and reuse in collaborative product development.
    International Conference on Product Lifecycle Management, Montreal, Juillet 2012, 10.
    Springer, Montreal, 2012.
  56. Trong Dung Nguyen, Houssem Badreddine, Khemais Saanouni,
    ON ANISOTROPIC DAMAGE COUPLED WITH ELASTO-PLASTICITY AT FINITE STRAIN.
    ICDM - International Conference on Damage Mechanics, Belgrade, Serbia, June 2012, 4.
    2012.
  57. T. D. Nguyen, Houssem Badreddine, Khemais Saanouni,
    NON-ASSOCIATIVE FINITE STRAIN PLASTICITY COUPLED WITH ANISOTROPIC DUCTILE DAMAGE FOR METAL FORMING.
    11th Biennial Conference On Engineering Systems Design And Analysis ESDA2012 , Nantes, France, July 2012, 6.
    2012.
  58. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Gwénaëlle Proust, Laurent Waltz,
    Microstructural evolution of a 316L alloy subjected to surface nanocrystallisation and low-temperature plasma nitriding.
    The 15th International Conference on Advances in Materials & Processing Technologies (AMPT 2012), Wollongong, NSW Australia., September 2012, 6.
    2012.
  59. Abel Cherouat, M Assarar, H Sabhi, Xiao-Lu Gong,
    Mechanical behavior of recycled polypropylene hemp fiber composite material.
    5th Int Conf. on Polymer Behavior , Aveiro Portugal, October 2012, 6.
    2012.
  60. Abel Cherouat, H Saidane, Xiao-Lu Gong, H Sabhi, M Assarar,
    Les matériaux composites et agro-composites : Mise en forme, Caractérisation et Modélisation.
    CRATT'2012 Conférence internationale, ISET Radès Tunisie, Octobre 2012, 6.
    2012.
  61. Hassène Bouzaiene, Mohamed Ayadi, Manuel François, Bruno Guelorget,
    Influence of clamping and cooling on the distribution of residual stresses in Friction Stir Welding of aluminum alloy.
    International Conference on Manufacturing Engineering and Technology for Manufacturing Growth METMG 2012, San Diego, November 2012, 6.
    2012.
  62. Yishi Su, Xiao-Lu Gong,
    Influence du taux de remplissage de polymère sur les propriétés en compression des métaux poreux polymères composites (MPPC).
    International Symposium on Aircraft Materials 2012, Fez Maroc, Mai 2012, 6.
    2012.
  63. Donato Gallitelli, Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Carl Labergère, Manuel François,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    9th International Conference on Residual Stresses (ICRS-9), Garmisch-Partenkirchen, October 2012, 6.
    2012.
  64. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Guillaume Montay, Laurent Waltz,
    Evolution of the residual stress state after surface mechanical attrition treatment and low temperature plasma nitriding.
    The 9th International Conference on Residual Stresses (ICRS9), Garmisch-Partenkirchen,Germany, October 2012, 1.
    2012.
  65. Xiao-Lu Gong, Fei Zhao, Di Zhang,
    Etude expérimentale et numérique des propriétés de frottements des composites de matrice titane renforcée in situ par TiB/TiC.
    International Symposium on Aircraft Materials 2012, Fez Maroc, Mai 2012, 7.
    2012.
  66. Xiao-Lu Gong,
    Effect of ultraviolet and moisture aging on the mechanical properties of hemp fibers Composites.
    ICVSEM 2012, 2012 International Conference on Vibration, Structural Engineering and Measurement 19-21 oct. 2012 ShangHai China, 6.
    2012.
  67. Guillaume Herlem, Pierre-Antoine Adragna, Guillaume Ducellier, Alexandre Durupt,
    DMU maturity management as an extension of the Core Product Model.
    International Conference on Product Lifecycle Management, Montreal, Juillet 2012, 10.
    Springer, Montreal, 2012.
  68. Jawad Badreddine, Donato Gallitelli, Matthieu Micoulaut, Emmanuelle Rouhaud, Sebastien Remy, Manuel François, Vincent Desfontaines, F. Chateau, P. Renaud, Gaelle Doubre-Baboeuf,
    Complete Simulation of ultrasonic shot-peening process.
    26th International Conference on Surface Modification Technologies (SMT-26), Lyon, June 2012, 6.
    2012.
  69. Delphine Retraint, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Claude Garnier, Clémence Demangel,
    Combined surface treatment: surface nanocrystallisation and nitriding.
    European Conference on Combined treatments to improve surface properties, Strasbourg, March 2012, 1.
    2012.
  70. Salam Ali, Alexandre Durupt, Pierre-Antoine Adragna, Nadège Troussier,
    3D information management enabling manufacture engineering.
    Proceedings of the ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis 3, 513–520.
    ASME, 2012.
  71. Nada Matta, Guillaume Ducellier, Yannick Charlot, Rhida Beldjoudi, François Tribouillois, Edouard Hibon,
    Traceability of Design Project Knowledge using PLM.
    IEEE International Conference on Cooperation Technologies and sciences, Philadelphia, May 2011, 233–240.
    IEEE, 2011.
  72. Nada Matta, Guillaume Ducellier, Yannick Charlot,
    Traceability and project memory in PLM.
    International Conference on Product Lifecycle Management, Amsterdam, July 2011, 10.
    IEEE, Amsterdam, 2011.
  73. F. Zhao, Xiao-Lu Gong, D. Zhang,
    The strengthen mechanism of in situ TiB/TiC reinforced Ti1100 composites and finite element analysis.
    ICCE 19, 19th Annual Int. Conf. on Comp. or Nano Eng, , 24-30 Juillet, 2011, Shanghai Chine,, 6.
    2011.
  74. Yishi Su, Xiao-Lu Gong,
    Study of dynamic drop impact response of open-cell metal foam.
    International Conference on Composites/Nano Engineering (ICCE-19), Shanghai Chine, July 2011.
    2011.
  75. Yishi Su, Xiao-Lu Gong,
    Study oF compressive properties of metal porous polymer composites under different temperature conditions.
    ICCM18, International Conference of Composite Materials , Jeju Island, KOREA, August 2011, 6.
    2011.
  76. Ibrahim Assouroko, Guillaume Ducellier, Benoit Eynard, Philippe Boutinaud,
    Semantic-based approach for product design and numerical simulation integration.
    PLM Conference, Eindhoven, Juillet 2011, 10.
    2011.
  77. Salam Ali, Alexandre Durupt, Pierre-Antoine Adragna,
    Reverse Engineering For Manufacturing approach: based on the combination of 3D and Knowledge information.
    Proceedings of the 23rd CIRP Design Conference, 137–146.
    Springer, 2011.
  78. Guillaume Ducellier, Yannick Charlot,
    Product Lifecycle Management in Small to Medium Enterprises (SMEs): What is, Will be, and Should be for a Performant Collaborative Project Management Platform.
    International Conference on Collaboration Technologies and Systems (CTS 2011), Philadelphia, May 2011, 10.
    IEEE, 2011.
  79. Daniele Ayrault, Alix Bonaventure, Olivier Asserin, Guillaume Montay, Vincent Klosek,
    Numerical and experimental evaluation of residual stresses in dissimilar weld joints.
    American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6(PARTS A AND B), 1515–1522.
    2011.
  80. Delphine Retraint, Zakaria Quadir, W Xu, Laurent Waltz, Michael Ferry,
    Microstructural investigation of roll bonded nanocrystalline stainless steel sheets.
    The 16th International Conference on the Textures of Materials (ICOTOM 16), Bombay (India), December 2011, 6.
    2011.
  81. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Laurent Waltz, Clémence Demangel,
    Influence of surface mechanical attrition treatment on low temperature plasma nitriding of medical grade austenitic stainless steel.
    European Congress and Exhibition on Advanced Materials and Processes, Montpellier, France, September 2011, 1.
    2011.
  82. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Impact velocity and distribution in ultrasonic shot peening.
    International Conference on Shot Peening - ICSP11, South Bend - USA, September 2011, 6.
    2011.
  83. Sami Jelliti, Caroline Richard, Delphine Retraint,
    Electrochemical Studies on the Stability and Corrosion Resistance of Ti-6Al-4V Alloy for Biomedical Applications.
    The 12th World Conference on Titanium (Ti-2011), Beijing (China), June 2011, 4.
    2011.
  84. Shuai Jin, Xiao-Lu Gong,
    Effects of ultraviolet aging on the mechanical properties of hemp fibers.
    International Conference on Composites/Nano Engineering (ICCE-19), shanghai Chine, July 2011, 6.
    2011.
  85. Abel Cherouat, Xiao-Lu Gong, Florent Ilczyszyn, Shuai Jin, Guillaume Montay,
    Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers.
    The 2nd International Conference on Advances in Materials and Manufacturing Processes (2nd CAMMP), GuiLin Chine, December 2011, 6.
    2011.
  86. Mahdi Chemkhi, Yuanyuan Pi, Delphine Retraint, Guillaume Montay, Clémence Demangel, Claude Garnier, Farid Belhacene, Hicham Benhayoune,
    Effect of SMAT parameters on microstructural features using DOE technique.
    11th International Congress on Shot Penning, South Bend, Indiana, USA, September 2011, 6.
    2011.
  87. Sami Jelliti, Caroline Richard, Delphine Retraint, J Landoulsi, Clemence Demangel,
    Comportement en tribocorrosion de l'alliage Ti6Al4V dans une solution de Ringer.
    Journées Internationales Francophones de tribologie (JIFT¿11), Strasbourg, Mai 2011, 4.
    2011.
  88. Ibrahim Assouroko, Guillaume Ducellier, Benoit Eynard,
    Amélioration de la gestion collaborative des connaissances produit à partir des technologies du Web sémantique.
    conférence Internationale Conception & Production Intégrée , Oujda, Octobre 2011, 10.
    2011.
  89. M. Malekipour Gharbi, Carl Labergère, Houssem Badreddine, C. Soyarslan, A. Weinrich, M. Hermes, S. Chatti, H. Sulaiman, Khemais Saanouni, E. Tekkaya,
    Advanced experimental-numericla investigations of cold bending of high strength steels.
    International conference on technology of plasticity, dortmund, September 2011, 6.
    2011.
  90. Yuanyuan Pi, Delphine Retraint, Clemence Demangel, Gueda Agoda, Hicham Benhayoune,
    Surface nanocrystallization of Ti-6Al-4V alloy: microstructural and mechanical characterization.
    5th International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT-5), Reims, Octobre 2010, 6.
    2010.
  91. Jianfei Wang, Xiao-Lu Gong,
    Simulation of manufacturing process of aluminum foam-polymer composite.
    Advances and Trends in Engineering Materials and their Applications, AES-ATEMA¿2010 , Brixen, Dolomites ITALY, July 2010, 8.
    2010.
  92. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier,
    Reverse Engineering of a piston using Knowledge Based Reverse Engineering approach.
    CIRP DESIGN SEMINAR 20th, Nantes, Avril 2010, 7.
    2010.
  93. Mahdi Chemkhi, Yuanyuan Pi, Delphine Retraint, Clemence Demangel, Hicham Benhayoune,
    Influence of a nanocrystalline surface layer on fatigue strength of Ti-6Al-4V.
    10th International Fatigue Congress (FATIGUE 2010), Prague, Juin 2010, 6.
    2010.
  94. Pierre-Antoine Adragna, Serge Samper, Hugues Favreliere,
    How form errors impact on 2D precision assembly with clearance?.
    International Precision Assembly Seminar, Chamonix, February 2010, 10.
    Springer, Berlin, 2010.
  95. Delphine Retraint, Juha Uusitalo, Pentti Karjalainen, Mikko Palosaari,
    Effect of the Surface Mechanical Attrition Treatment on the fatigue properties of two austenitic stainless steels.
    10th International Fatigue Congress (FATIGUE 2010), Prague, Juin 2010, 2.
    2010.
  96. Jawhar El Gueder, Lionel Roucoules, Emmanuelle Rouhaud, Florent Cochennec,
    DFM synthesis approach based on product-process interface modelling. Application to the peen forming process.
    CIRP Design Conference 2010, Nantes, France, Avril 2010, 8.
    2010.
  97. Sami Jelliti, Caroline Richard, Delphine Retraint,
    Approche Tribocorrosion des biomatériaux nanostructurés pour applications biomédicales.
    Journées Internationales Francophones de tribologie (JIFT¿10), Albi, Mai 2010, 4.
    2010.
  98. S Jelliti, Caroline Richard, M Bigerelle, Delphine Retraint, Hicham Benhayoune,
    Tribocorrosion d'alliages métalliques (acier inoxydable AISI 316L et TiAl6V) nanostructurés par procédé duplex (SMAT, Nitruration) - Projet « NANOSURF ».
    Journées Internationales Francophones de tribologie (JIFT'09),, Compiègne, Mai 2009, 2.
    2009.
  99. Jawhar El Gueder, Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Product-process interface for effective product design and manufacturing in a DFM approach.
    International Congress Design and Modelling of Mechanical Systems CMSM'2009, Hammamet, Tunisie, Mars 2009, 8.
    2009.
  100. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier,
    Prise en compte de connaissances métiers pour la rétro-conception de pièces mécaniques - le projet PHENIX.
    CoDeKF 2009, Belfort, Novembre 2009, 6.
    2009.
  101. Ibrahim Assouroko, Guillaume Ducellier, Benoit Eynard, Philippe Boutinaud,
    Méthodes et protocoles d'échange et de gestion d'information dans la chaîne cao-calcul.
    Conception et Production Intégrées, Fès, Octobre 2009, 8.
    2009.
  102. Ibrahim Assouroko, Benoit Eynard, Philippe Boutinaud, Guillaume Ducellier,
    La dynamique des connaissances dans le processus d'ingénierie numérique - Intégration CAO-Calcul.
    Congrès Français de Mécanique, Marseille, Août 2009, 8.
    2009.
  103. Dimitri Van Wijk, Benoit Eynard, Nadège Troussier, Farouk Belkadi, Lionel Roucoules, Guillaume Ducellier,
    Integrated Design and PLM Applications in Aeronautics Product Development.
    CIRP DESIGN SEMINAR, Cranfield, March 2009, 6.
    2009.
  104. T. Dupont, Olivier Sicot, Ph Leclaire, Xiao-Lu Gong,
    High sound pressure model for cellular metallic foam with semi open cells.
    EURONOISE 2009, Edinburgh, UK, October 2009, 10.
    2009.
  105. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Experimental investigation on a nanocrystallized multilayered structure obtained with a duplex treatment: SMAT and co-rolling.
    7th EUROMECH Solid Mechanics, Lisbonne, Septembre 2009, 6.
    2009.
  106. Xiao-Lu Gong, Abel Cherouat,
    Etude de l'indentation des mousses d'aluminium avec le pénétrateur de cône.
    9ème congrès de Mécanique, Marrakech, Maroc, Avril 2009, 4.
    2009.
  107. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier, Emmanuel Guyot,
    A new reverse engineering process, the combination between the knowledge extraction and the geometrical recognition techniques.
    International Conference on Computers and Industrial Engineering, CIE 39, Troyes, Juillet 2009, 6.
    2009.
  108. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier, Emmanuel Guyot,
    A new reverse engineering methodology based on knowledge extraction and geometrical recognition approaches.
    International Conference on Engineering Design, ICED'09, Stanford, Août 2009, 12.
    2009.
  109. Houssem Badreddine, Khemais Saanouni,
    3D vs plane stress formulations of anisotropic non normal plastic and damage models for sheet metal forming.
    ICF12: 12th International Conference on Fracture, Ottawa, Canada, Juillet 2009, 6.
    2009.
  110. A. Baczmański, Benoît Panicaud, Manuel François, Khemais Saanouni, N. Hfaiedh, K. Wierzbanowski,
    Study of damage process using self-consistent elastoplastic model.
    Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 1181–1185.
    2008.
  111. Alain Etienne, Emmanuel Guyot, Guilain Cabannes, Guillaume Ducellier, Lionel Roucoules,
    Specification and developments of Interoperability Solutions dedicated to Multiple Expertise Collaboration in a Design Framework.
    International Conférence on Software, Knowledge, Information Management and Applications, KathMandu, March 2008, 6.
    2008.
  112. Wajdi Rajhi, Khémaïs Saanouni, Houssem Badreddine, Carl Labergère,
    Simulation numérique de l¿endommagement dans quelques procédés de formage plastique d'un acier de hautes performances.
    COTUME¿2008: Congrès Tunisien de Mécanique , Hammamet, Tunisie, Mars 2008, 6.
    2008.
  113. Pierre-Antoine Adragna,
    Respecting the loss-cost of a non-symmetrical functional requirement with a statistical tolerancing approach.
    11th CIRP conference on Computer Aided Tolerancing (CAT2009), Annecy, March 2008, 8.
    2008.
  114. Jawhar El Gueder, Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Product-process interface for manufacturing data management as a support for DFM and virtual manufacturing.
    IDMME 2008 - 8th International Conference in Integrated Design and Manufacturing for Mechanical Engineering, Beijing, China, Octobre 2008, 8.
    2008.
  115. Nikolaz Garsot, Abel Cherouat, Xiao-Lu Gong,
    Numerical modelling of mechanical behaviour of Metal Porous Polymer Composite.
    6th International Forum on Advanced Material Science and Technology, HongKong, 11-14 June 2008.
    2008.
  116. N. Garsot, Abel Cherouat, Xiao-Lu Gong,
    Numerical modelling of mechanical behaviour of Metal Porous Polymer Composite.
    The 6th International Forum on Advanced Material Science and Technology, 12-14 June 2008, Hong Kong,, 6.
    2008.
  117. Christophe Cellard, Delphine Retraint, Emmanuelle Rouhaud, Manuel François, Ana Viguera-Sancho,
    Laser Shock Peening of a Titanium Alloy: Influence of Process Parameters.
    ICSP 10 (International Conference on Shot Peening), Tokyo, September 2008, 6.
    2008.
  118. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    HIGH STRENGTH NANOCRYSTALLIZED MULTILAYERED STRUCTURE OBTAINED BY SMAT AND CO-ROLLING.
    The 6th International Forum on Advanced Material Science and Technology (IFAMST , HONG KONG, June 2008.
    2008.
  119. Zhaoting Liu, Tongxiang Fan, Di Zhang, Xiao-Lu Gong,
    Gas Sensing Properties of Biotemplated Porous ZnO.
    The 6th International Forum on Advanced Material Science and Technology, 12-14 June 2008, Hong Kong,, 3.
    2008.
  120. Abraham Nkondo Dika, Guillaume Ducellier, Benoit Eynard, Pascal Lafon, Dominique Deneux,
    From workflow specification to implementation: an industrial use case.
    International Design Conference, Dubrovnik, May 2008, 8.
    2008.
  121. Juha Uusitalo, Pentti Karjalainen, Delphine Retraint, Mikko Palosaari,
    Fatigue properties of steels with ultrasonic attrition treated surface layers.
    International Conference Recent Developments in the Processing and Applications of Structural Metals and Alloys, COMO, Italy, June 2008, 239–248.
    2008.
  122. Houssem Badreddine, Carl Labergère, Khémaïs Saanouni, Wajdi Rajhi, Alain Rassineux, Dominique Kircher,
    F.E. elastoplastic damaged model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation.
    ESAFORM 2008, Lyon, April 2008, 6.
    2008.
  123. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    COMBINATION OF THE SMA-TREATMENT AND THE CO-ROLLING PROCESS FOR THE PRODUCTION OF A NANOSTRUCTURED COMPOSITE STRUCTURE.
    The Tenth International Conference of Shot Peening (ICSP 10), TOKYO, September 2008, 6.
    2008.
  124. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier, William Derigent,
    A new knowledge based approach: the reverse engineering of a product.
    International Design Conference, Design 2008, Dubrovnik, Mai 2008, 8.
    2008.
  125. Guillaume Ducellier, Pierre Alain Yvars, Benoit Eynard,
    A CSP approach for managing Design Change Order in a PLM platform.
    International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bejing, October 2008, 8.
    2008.
  126. Khémaïs Saanouni, Houssem Badreddine,
    3D vs plane stress formulations of anisotropic non normal plasticity with damage for sheet metal forming.
    IDDRG 2008, Olofström, Sweden, Juin 2008, 6.
    2008.
  127. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Surface property modifications of steel induced by SMAT.
    The 21st International Conference on Surface Modification Technologies (SMT21), Paris, Septembre 2007, 6.
    2007.
  128. Guillaume Montay, Bruno Guelorget, Ignacio Lira, Marie Tourneix, Manuel François, Cristian Vial-Edwards,
    Strain localization analysis by combination of the ESPI with bulge test.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  129. Bruno Guelorget, Manuel François, Guillaume Montay,
    Strain evaluation in the neck of a tensile test specimen by ESPI strain rate measurement.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  130. Keqin Wang, Shurong Tong, Benoit Eynard, Lionel Roucoules, Nada Matta,
    Review on Application of Data Mining in Product Design and Manufacturing.
    Fourth International Conference on Fuzzy Systems and Knowledge Discovery, Haikou, August 2007, 10.
    2007.
  131. Christophe Cellard, Pierre Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, Ana Viguera-Sancho,
    Residual Stress and Deformation Induced by Laser Shock Peening on Titanium Alloys.
    ICEM13 (International Conference on Experimental Mechanics), Alexandroupolis, July 2007, 9.
    2007.
  132. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by speckle interferometry combined with the drill of a groove.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  133. Emmanuel Guyot, Guillaume Ducellier, Benoit Eynard, Philippe Girard, Thomas Gallet,
    Product data and digital mock-up exchange based on PLM.
    4th international conference on product Lifecycle Management, Kilometro-Rosso, Stezzano, July 2007, 10.
    2007.
  134. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Prediction of damage in hydro bulging test using a non normal and non quadratic anisotropic plasticity formulation, , 19-21 March 2007.
    2nd World congress Design and Modelling of Mechanical System, Monastir, Tunisia, March 2007, 6.
    2007.
  135. Zhaoting Liu, Tongxiang Fan, Di Zhang, Xiao-Lu Gong,
    Optimization of Synthesis of Biomorphic Cellular Iron Oxide from Wood Templates.
    First int conf. on multidisciplinary design optimization and appl. avril 07 Besançon, CD, 4.
    2007.
  136. Xiao-Lu Gong, Yu Liu, Abel Cherouat, Nikolaz Garsot,
    On the compression behaviour of open-cell aluminium foams.
    CCTAM2007, Beijing Chine, Août 2007, 6.
    2007.
  137. Xiao-Lu Gong, Yu Liu, Nikolaz Garsot, Abel Cherouat,
    On the compression behaviour of open-cell aluminium foams.
    CCTAM2007, Chinese Conference of Theoretical and Applied Mechanics 2007, 19-23 août 2007, Beijing, CD, N° 002187, 6.
    2007.
  138. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Non normal and non quadratic anisotropic plasticity coupled with ductile damage in sheet metal forming: Application to the hydro bulging test..
    10th ESAFORM conference on material forming, Zaragoza, Spain, April 2007, 6.
    2007.
  139. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    21st International Conference on Surface Modification Technologies (SMT21), PARIS, September 2007, 9.
    2007.
  140. Christophe Cellard, Pierre Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, Ana Viguera-Sancho,
    Laser Shock Peening on Titanium Alloys : Residual Stress and Deformations.
    SMT21 (21st International Conference on Surface Modification Technologies), Paris, September 2007, 6.
    2007.
  141. Pierre-Antoine Adragna, Serge Samper, Maurice Pillet,
    Inertial tolerancing applied to 3D and form tolerancing with the modal analysis.
    10th CIRP conference on Computer Aided Tolerancing (CAT 2007), erlangen, March 2007, 12.
    2007.
  142. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Impact of a non associative plasticity on damage prediction in sheet metal forming, May 21-23, 2007.
    IDDRG¿2007, Gyõr, Hungary, May 2007, 6.
    2007.
  143. Pierre-Antoine Adragna, Maurice Pillet, Serge Samper, Fabien Formosa,
    Guarantying a maximum of Non-Conformity on the assembly resultant with a statistical tolerancing approach.
    10th CIRP conference on Computer Aided Tolerancing (CAT 2007), erlangen, March 2007, 12.
    2007.
  144. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    GLOBAL BEHAVIOR OF A NANOSTRUCTURED MULTILAYERED COMPOSITE MATERIAL PRODUCED BY SMAT AND CO-ROLLING.
    International Conference on Experimental Mechanics 13 (ICEM13), ALEXANDROUPOLIS, July 2007, 10.
    2007.
  145. Yu Liu, Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Experimental and numerical study of the compression behaviour of open-cell aluminium foams.
    First int conf. on multidisciplinary design optimization and application, Besançon, Avril 2007, 8.
    2007.
  146. Yu Liu, Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Experimental and numerical study of the compression behaviour of open-cell aluminium foams.
    First int conf. on multidisciplinary design optimization and appl. avril 07 Besançon, CD, 4.
    2007.
  147. Bruno Guelorget, Manuel François, Jian Lu,
    Evaluation of damage and plastic properties by microindentation and inverse method.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  148. Khémaïs Saanouni, Houssem Badreddine,
    Damage prediction in sheet metal forming, 18-21 June, 2007.
    invited paper, NUMIFORM 2007,, Porto, Potugal, June 2007, 6.
    2007.
  149. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiaolu Gong,
    Compressive Behavior of Porous Metal/Polymer Composite: Experiment and Numerical Modeling.
    POROUS METALS AND METALLIC FOAMS: METFOAM 2007, Montreal, September 2007, 4.
    2007.
  150. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Compressive behavior of Metal Porous - Polymer Composite (MPPC): experiment and numerical simulation.
    Metfoam Conference on Porous Metals and Metallic Foams Sep. 5-7, 2007 Montreal Canada, 8.
    2007.
  151. Keqin Wang, Shurong Tong, Benoit Eynard, Lionel Roucoules, Nada Matta,
    Application of Data Mining in Manufacturing Quality Data.
    IEEE International Conference on Engineering, Services and Knowledge Management, pekin, September 2007, 10.
    2007.
  152. Abel Cherouat, Laurence Moreau, Houman Borouchaki, Xiao-Lu Gong, P. Lang,
    Advanced virtual procedures for simulating metal forming processes(conference invitee).
    International Workshop : Advencements in design optimization of materials, structures and mechanical systems, 17-20, dec. 2007, Xi’An China, 4.
    2007.
  153. Abel Cherouat, Laurence Moreau, Houman Borouchaki, Xiao-Lu Gong, P Lang,
    Advanced virtual procedures for simulating metal forming processes.
    International Workshop : Advencements in design optimization of materials, structures and mechanical systems, Xi'An Chine, December 2007, 12.
    2007.
  154. Laurence Giraud-Moreau, Houman Borouchaki, Abel Cherouat,
    Adaptive remeshing method based on refinement and coarsening techniques.
    10th Esaform Conference on Material Forming, Zaragoza - Espagne, April 2007, 6.
    2007.
  155. Abel Cherouat, Laurence Giraud-Moreau, Houman Borouchaki,
    Adaptive Refinement procedure for sheet metal forming.
    9th International Conference on Numerical Methods in Industrial Forming Processes, PORTO, Portugal, June 2007, 937–942.
    2007.
  156. Hugues Favreliere, Serge Samper, Pierre-Antoine Adragna,
    3D statistical analysis and representation of form error by a modal approach.
    10th CIRP conference on Computer Aided Tolerancing (CAT 2007), erlangen, March 2007, 10.
    2007.
  157. Bruno Guelorget, Manuel François, Guillaume Montay, Laurent Daniel, Jian Lu,
    Uncertainty evaluation of strain rate measurement by ESPI during a tensile test.
    Speckle 06, Nimes, September 2006, 6.
    2006.
  158. Guillaume Ducellier, Sébastien Charles, Benoit Eynard, Emmanuel Caillaud,
    Traceability of simulation data in a PLM environment: proposition of a step based system that supports parameter integration.
    9th International Design Conference (Design 2006), Dubrovnik, May 2006, 7.
    2006.
  159. Guillaume Montay, Abel Cherouat, Jian Lu,
    Residual stress analysis in crankshaft using the hole drilling method.
    7th European Conference on Residual Stresses, Berlin (Allemagne), September 2006.
    2006.
  160. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    New rotational kinematics in anisotropic elasto ¿ plasticity with damage 19-21 Jun 2006,.
    IDDRG conference , Porto, Portugal, June 2006, 6.
    2006.
  161. Keqin Wang, Lionel Roucoules, Nada Matta, Shurong Tong, Benoît Eynard,
    Manufacturing Quality Information Supporting Concurrent Design Decisions.
    INCOM 2006, Saint Etienne, May 2006, 7.
    2006.
  162. Keqin Wang, Lionel Roucoules, Nada Matta, Benoit Eynard, Shurong Tong,
    Manufacturing Quality Information Classification based on Group Technology and Quality BOM.
    CESA, Pekin, June 2006, 8.
    2006.
  163. Jian Lu, Pascal Lafon, Delphine Retraint, Emmanuelle Rouhaud,
    Integration of the Residual Stress in the Engineering Design of Mechanical Components and Structure using the Prestress Engineering Approach.
    16th CIRP Design Seminar, Alberta, July 2006, 10.
    2006.
  164. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui,
    Influence of anisotropic non normal plasticity on the isotropic ductile damage in sheet metal forming.
    ICAMEM conference 17-19 Dec 2006, , Hammamet-Tunisia, December 2006, 6.
    2006.
  165. Maurice Pillet, Pierre-Antoine Adragna, Serge Samper, Fabien Formosa,
    Inertial tolerancing: the acceptance sorting problem.
    6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), grenoble, May 2006, 12.
    2006.
  166. Pierre-Antoine Adragna, Maurice Pillet, Serge Samper, Fabien Formosa,
    Inertial tolerancing guarantying a Cpk index on the final characteristic in an assembly production.
    6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), grenoble, May 2006, 12.
    2006.
  167. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    7th European Conference on Residual Stresses, Berlin (Allemagne), Septembre 2006.
    2006.
  168. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    7th European Conference on Residual Stresses, Berlin, Allemagne, 13-15 sep. 2006,, 6.
    2006.
  169. Khémaïs Saanouni, Houssem Badreddine,
    Damage prediction in sheet metal forming. Theory, numerics and application.
    Keynote Lecture, IDDRG 2006, Porto, Portugal, June 2006, 6.
    2006.
  170. Ghassan El Chahal, Pascal Lafon, Rafic Younes,
    Analytical modelling and Shape optimization of a floating brakewater.
    4th IASME / WSEAS Int. Conf. on FLUID MECHANICS and AERODYNAMICS.
    2006.
  171. Florent Cochennec, Emmanuelle Rouhaud, Delphine Retraint, Sébastien Rouquette, Arjen Roos,
    Analysis of the impact of a shot at low velocity using the finite element method. Application to the ultrasonic shot peening process.
    Materials science forum 524-525, 337–342.
    2006.
  172. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat,
    Aging effect on residual stresses field in composite laminate.
    ECCM 12 : 12th European Conference on Composite Materials - 29 août-1er septembre 20, Biarritz, Août 2006, 8.
    2006.
  173. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong,
    Aging effect on residual stresses field in composite laminate.
    12th European Conference on Composite Materials, Biarritz France, sep. 2006, CD, 6.
    2006.
  174. Sébastien Rouquette, Emmanuelle Rouhaud, Hervé Pron, Manuel François, Christian Bissieux,
    Thermo-elasto-plastic model for shot peening : a numerical and experimental approach.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 6.
    2005.
  175. Nabil Belamri, Abel Cherouat, Khémaïs Saanouni, Philippe Autesserre,
    Simulation de refendage 3D des tôles minces en utilisant le couplage de l'écoulement plastique anisotrope avec endommagement ductile.
    Conférence Internationale de Mécanique Avancée (CIMA), Boumerdes Algérie, Septembre 2005, 4.
    2005.
  176. Claude Garnier, Jian Lu, Alain Milley, Guillaume Montay, Delphine Retraint,
    Presentation of a general approach for taking into account the residual stress in the design of automotive components.
    SAE Congress, Detroit, April 2005, 539–546.
    2005.
  177. Nabil Belamri, Abel Cherouat, Khémaïs Saanouni, Philippe Autesserre,
    Numerical simulation 3D of sheet metal slitting process.
    4th International Conference on Fracture and Damage Mechanics, Mallorca, Spain, July 2005, 6.
    2005.
  178. Sébastien Charles, Guillaume Ducellier, Lin Li, Benoît Eynard,
    Improvement of 3D Data Exchanges in the Product Lifecycle Management.
    International Conference on Product Lifecycle Management - PLM'05, Lyon, July 2005, 10.
    2005.
  179. Matthieu Micoulaut, Delphine Retraint, Pascal Viot, Manuel François,
    Heterogeneous ultrasonic shot-peening : experiments and simulations.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 119–124.
    2005.
  180. Emmanuelle Rouhaud, Jean-Louis Chaboche, Manuel François, Choumad Ould, Sébastien Rouquette,
    Finite elements model of shot-peening, effects of material's constitutive law.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 6.
    2005.
  181. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Fatigue life improvement through nanostructuring of stainless steel.
    9th International Conference on Shot-Peening (ICSP9), Marne-La-Vallée, August 2005, 6.
    2005.
  182. Cristian Vial-Edwards, Bruno Guelorget, Manuel François, Ignacio Lira, Marcello Münzenmayer,
    Determination of forming limits of sheet metals by electronic speckle pattern interferometry.
    8th international symposium on laser metrology, Mérida, Mexico, February 2005, 9.
    2005.
  183. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, C Vial,
    Combinaison de l'interférométrie de speckle à l'essai de gonflement pour l'analyse la localisation.
    CMOI, MARSEILLE, Novembre 2005, 6.
    2005.
  184. Ardevan Bakhtari, Pierre-Antoine Adragna, Beno Benhabib,
    Autonomous Surveillance of a Dynamic, Multi-Object Environment: An Implementation for Automated Facial Recognition.
    IEEE International Workshop on Measurement Systems for Homeland Security, Contraband Detection and Personal Safety Workshop (IMS 2005), Orlando, March 2005, 6.
    2005.
  185. Guillaume Montay, Ignacio Lira, Marie Tourneix, Bruno Guelorget, Manuel François, C Vial,
    Analysis of localization of strains by ESPI, in equibiaxial loading (bulge test) of copper sheet metals.
    fringe 2005, stuttgart, Septembre 2005, 4.
    2005.
  186. Nabil Belamri, Mourad Khelifa, Khémaïs Saanouni, Abel Cherouat, Philippe Autesserre,
    Sheet metal blanking simulation using a coupled anisotropic plastic flow damage modelling.
    7th International ESAFORM Conference on Material Forming, Trondheim, Norway, April 2004.
    2004.
  187. Philippe Lestriez, Abel Cherouat, Khémaïs Saanouni, Jean-François Mariage,
    Orthogonal metal cutting simulation by thermo-elasto-visco-plastic constitutive equations fully coupled with ductile damage.
    8th International Conference on Numerical Methods in Industrial Forming Process, Columbus (Etats Unis), June 2004.
    2004.
  188. Philippe Lestriez, Jean-François Mariage, Khémaïs Saanouni, Abel Cherouat,
    Numerical simulation of wheel forming process with damage and thermal effects.
    8th International Conference on Numerical Methods in Industrial Forming Process, Columbus (Etats Unis), June 2004.
    2004.
  189. Laurence Giraud-Moreau, Houman Borouchaki, Abel Cherouat,
    New adaptive remeshing technique for the numerical simulation of thin sheet metal forming.
    4th European Congress on computational Methods in Applied Sciences and Engineering (Eccomas 2004), Jyvâskylä, Finland, July 2004.
    2004.
  190. Xiao-Lu Gong, Yu Liu, Siyuan He, Jian Lu,
    Manufacturing and low-velocity impact response of a new composite material : Metal Porous Polymer Composite (MPPC)”.
    4th Int. Forum on Advanced Material Science and Technology, France, Troyes 7-9 juillet. 2004, 6.
    2004.
  191. Siyuan He, Xiao-Lu Gong, Jian Lu, Y. Liu,
    Impact behavior of porous aluminum alloy under low velocity.
    Fifth Int. Symposium on Impact Eng. (ISIE 5), Cambridge UK 11-15 juillet 2004, 9.
    2004.
  192. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th International conference on residual stress, Xian (China) June 2004.
    2004.
  193. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th Inter. Conf. On Residual Stresses, Xi’An, Chine, Juin 2004 CD, 6.
    2004.
  194. Mourad Khelifa, Nabil Belamri, Khémaïs Saanouni, Abel Cherouat,
    Damage Effect in Metal Forming Processes using Adaptive Remeshing.
    4th International Conference on Engineering Computational Technology, Lisbon, Portugal, September 2004.
    2004.
  195. Guillaume Montay, Abel Cherouat, None Nussair, Jian Lu,
    Caractérisation et modélisation de l'aptitude à la déformation des structures souples.
    4ème Congrès National en Mécanique expérimentale des matériaux et des structures, Tarbes, Janvier 2004.
    2004.
  196. Laurence Giraud-Moreau, Houman Borouchaki, Abel Cherouat,
    Adaptive remeshing for stamping process.
    7th International Conference on Computational Structures Technology (CST2004), Lisbon, Portugal, September 2004.
    2004.
  197. Jean-François Mariage, Khémaïs Saanouni, Philippe Lestriez, Abel Cherouat,
    Sheet metal deburring and drilling simulation by continuum damage mechanics.
    6th International ESAFORM Conference on Material Forming, Salerno (Italia), April 2003.
    2003.
  198. Philippe Lestriez, Khémaïs Saanouni, Jean-François Mariage, Abel Cherouat,
    Numerical prediction of damage in metal forming processes including thermal effects.
    6th International ESAFORM Conference on Material Forming, Salerno (Italia), April 2003.
    2003.
  199. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the residual stress on the mechanical behaviour of composite laminates during monotonous tensile and torque loading.
    Euromech 453, Saint-Etienne, December 2003.
    2003.
  200. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the residual stress on the mechanical behavior of composite laminates during monotonous tensile and torque loading.
    Euromech 453, Saint-Etienne, France, décembre 2003, CD, 6.
    2003.
  201. Abel Cherouat, Houman Borouchaki, Khémaïs Saanouni, Patrick Laug,
    An adaptive remeshing procedure in elastoplastic deformation with ductile damage application in metal forming processes.
    6th International ESAFORM Conference on Material Forming, Salerno (Italia), April 2003.
    2003.
  202. Y Guo, Khémaïs Saanouni, Abel Cherouat, Y Li, G Loppin, K Debray,
    Two methodologies for the simulation of ductile damage in sheet metal forming processes.
    International Symposium on Advanced Forming Technology, Beijing (China), 2002.
    2002.
  203. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Studies of residual stresses in composite laminates by the finite element method.
    6th Inter. Conf. On Residual Stresses, Coimbra, (Portugal), July 2002, 925–934.
    2002.
  204. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Studies of residual stresses in composite laminates by the finite element method.
    6th European Conference on Residual Stresses, Coimbra, Portugal, , juillet 2002, 925–934.
    2002.
  205. Abel Cherouat, Guillaume Montay, Jian Lu,
    Studies of residual stresses in complex parts by the finite element method.
    6th European Conference on Residual stresses, Lisbone (Portugal), July 2002.
    2002.
  206. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Simulation of residual stresses in composite laminates by the finite element method 6th European Conference on residual stresses.
    6th European Conference on Residual stresses, Lisbone (Portugal), July 2002.
    2002.
  207. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Simulation numérique du forgeage d'un écrou six pns avec prise en compte du couplage comportement endommagement dans Forge 2 et Forge 3.
    4ème Journées Scientifiques et Techniques en Mécanique et Matériaux JSTMM'02, Monastir (Tunisie) OCTOBRE 2002.
    2002.
  208. J.F Mariage, Khémaïs Saanouni, Abel Cherouat,
    Sheet metal cutting simulation by continum damage mechanics.
    5th International Conference on Material Forming, Krakow (Poland), APRIL 2002.
    2002.
  209. Houman Borouchaki, Abel Cherouat,
    Schéma adaptatif en mécanique des structures : application à la mise en forme des matériaux.
    4ème Journées Scientifiques et Techniques en Mécanique et Matériaux JSTMM'02, Monastir (Tunisie) OCTOBRE 2002.
    2002.
  210. Houman Borouchaki, P Laug, Abel Cherouat, Khémaïs Saanouni,
    Remeshing process in large deformation. Application to 2 D structure forming.
    8th International Conference on Numerical Grid Generation in Computational Field Simulations, Honolulu (Hawaii), JUNE 2002.
    2002.
  211. Abel Cherouat, Khémaïs Saanouni, P Lestriez,
    Numerical simulation of hydroforming processes with damage occurrence.
    5th International Conference on Material Forming, Krakow (Poland), APRIL 2002.
    2002.
  212. Khémaïs Saanouni, Abel Cherouat, P Lestriez, Houman Borouchaki,
    Numerical simulation of damage in metal forming processes using Abaqus.
    Abaqus World User's Conference, Newport (Rhode Island, USA), MAY 2002.
    2002.
  213. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Numerical simulation of damage in metal forming processes.
    MPD 4, Cachan (France), OCTOBER 2002.
    2002.
  214. Abel Cherouat, J.F Mariage, P Lestriez, Khémaïs Saanouni,
    Numerical Simulation of damage in metal forming process.
    4th International Conference on Materials Processes Defects, Cachan (France), September 2002.
    2002.
  215. P Lestriez, J.F Mariage, Khémaïs Saanouni,
    Numerical Simulation of 3D Sheet Forming Processes.
    5th International Conference and Workshop on, Taejon (Korea), October 2002.
    2002.
  216. P Lestriez, Khémaïs Saanouni, J.F Mariage, Abel Cherouat,
    Numerical prediction of damage in metal forming processes including thermal effects.
    7th International Mechanical Engineering Congress, ASME'02, New Orleans (USA), November 2002.
    2002.
  217. Abel Cherouat, J.L Billoet,
    Modèle numérique pour la modélisation du comportement des tissus pré-imprégnés lors de la mise en forme.
    Matériaux 2002 de la Conception à la Mise en œuvre, Tours (France), octobre 2002.
    2002.
  218. Katsuji Tosha, Jian Lu, Delphine Retraint, Bruno Guelorget, Kisuke Iida,
    Influence of pre-annealing on surface and surface layer characteristics produced by shot peening.
    The 8th International Conference on Shot Peening (ICSP-8), Garmisch-Partenkirch, September 2002, 173–180.
    2002.
  219. Abel Cherouat, Houman Borouchaki, Khémaïs Saanouni, Karim Nesnas, Jean-François Mariage,
    Ductile damage prediction in hydroforming processes.
    5th International Conference and Workshop on, Taejon (Korea), October 2002.
    2002.
  220. Xiao-Lu Gong, A Laksimi,
    Prediction of damage initiation in glass - epoxy composite under combined tension-torsion loading.
    13th International Conference of Composite Material (ICCM13), Pékin (Chine), June 2001, 1130.
    2001.
  221. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Optimization of Hydroforming Processes with Respect to Fracture.
    4th International Conference on Material Forming, ESAFORM, Liege (Belgium), April 2001.
    2001.
  222. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Effect of residual stresses on torque behaviors of composite laminate.
    13th International Conference of Composite Materials(ICCM13), Pékin (Chine).ISBN 7-9000-75-4, JUNE 2001, 1524.
    2001.
  223. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Influence of the residual stresses on the mechanical behaviour of advanced composite parts.
    International Conference Stress Evalutaion, Meca-sens 2000, Reims (France), DECEMBER 2000, 1.
    2000.
  224. Xiao-Lu Gong, Abel Cherouat, Olivier Sicot, Jian Lu,
    Determination of residual stresses in the case of composite laminate.
    6th International Conference on Residual Stresses, Oxford (United Kingdom), JULY 2000, 6.
    2000.
  225. Xiao-Lu Gong, Abel Cherouat, Xiao-Jing Gong, Jian Lu,
    Residual Stress distribution and its influence on the mechanical behaviour of composite laminates.
    12th International Conference of Composite Materials( ICCM12), Paris (France), JUILLET 1999, 1160.
    1999.
  226. Xiao-Lu Gong, Abel Cherouat, Xiao-Jing Gong, Jian Lu,
    Residual stress distribution and its influence on the mechanical behaviour of composite laminates.
    International Conference of Composite Materials, Paris (France), JULY 1999, 1160.
    1999.
  227. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Modèle numérique pour la caractérisation des contraintes résiduelles dans les matériaux multicouches.
    Congrès de Mécanique SMSM 4, Mohammadia (Maroc), AVRIL 1999, 1.
    1999.
  228. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Modèle numérique pour la caractérisation des contraintes résiduelles dans les matériaux multicouches.
    SMSM'4, Congrès de Mécaniques, Mohammadia (Maroc), AVRIL 1999, 1.
    1999.
  229. Xiao-Lu Gong, A Laksimi, M.L Benzeggagh,
    Application de critère de Tsai-Wu dans le cas des composites soumis en torsion.
    SMSM'4, congrès de Mécaniques, Mohammadia (Maroc), AVRIL 1999, 79–80.
    1999.
  230. Xiao-Lu Gong, Abdel Laksimi, Malk Benzeggagh,
    Stress and damage analysis in composite plates under torque loadings.
    3eme Congres de Mecanique, Tetouan (MParoc), Avril 1997, 761–767.
    1997.
  231. Bounouas, Xiao-Lu Gong, Abdel Laksimi, Cherfaoui, Haddouth,
    Identification de l'endommagement dans le polypropylène renforcé par des fibres de verre.
    Congrès de Mécanique, SMSM 3, TETOUAN (Maroc), Avril 1997, 299–305.
    1997.
  232. Xiao-Jing Gong, Xiao-Lu Gong, Aivazzadeh, Malk Benzeggagh,
    Fier bridging in DCB specimens and its effects on R-curves of a glass/epoxy compositye.
    Internation conference on composite Materials ICCM 10, VANCOUVER (Canada), AOUT 1995, 117–124.
    1995.
  233. Xiao-Lu Gong, Abdel Laksimi, Dawei Lai, Malk Benzeggagh,
    Damage analysis of glass/epoxy plates under combined tension-torsion loadings.
    International Conference on composite Materials ICCM 10, VANCOUVER (Canada), AOUT 1995, 351–358.
    1995.

Unindexed proceedings articles

  1. Elena Vakhitova, Denis Sornin, F. Barcelo, Manuel François,
    Texture evolution in Oxide Dispersion Strengthened (ODS) steel during tubes pilgering process.
    Proceedings of the 18th International Conference on Textures of Materials (ICOTOM-18).
    2017.
  2. Evangelia Diamantopoulou, Carl Labergere, Bruno Guelorget, Manuel François, Khemais Saanouni,
    An experimental-numerical study of the plastic flow localization based on a generalized micromorphic formulation.
    Proceedings of the 5th International Conference on Material Modeling (ICMM5).
    2017.
  3. Cong Cuong Pham, Nada Matta, Alexandre Durupt, Benoit Eynard, Marianne Allanic, Guillaume Ducellier, Marc Joliot, Philippe Boutinaud,
    Using Ontologies to access complex Data : Applications on Bio-Imaging.
    proceedings of AI4KM Workshop, IJCAI, 6.
    2016.
  4. Clémence Demangel, Daniella Tchana, Delphine Retraint, Hicham Benhayoune,
    Use of Surface Mechanical Attrition Treatment for implantable material wear enhancement.
    3rd International Conference on BioTribology (ICoBT 2016), Imperial College London (UK), 11-14 September.
    2016.
  5. Akram Alhussein, Félix Boisselier, Philippe Vannerot,
    Towards an innovated methodology for manufacturing homogeneous metallic alloys by the EBM technology.
    1st International Conference on Electron Beam Additive Manufacturing EBAM, Nuremberg-Germany.
    2016.
  6. Abel CHEROUAT, Guillaume MONTAY, Youcef BOUZIDI,
    Thermo-mechanical characterization of composite hemp fibers behavior.
    6 th International Symposium on Aircraft Materials ACMA 2016 Agadir - Morocco.
    2016.
  7. Armand Kanjer, Zelin Wu, Pascal Berger, Virgil Optasanu, Steeve Dejardin, Maria Carmen Marco de Lucas, Manuel François, Tony Montesin, Luc Lavisse,
    Retarding the high temperature oxidation of Titanium by shot-peening surface treatment.
    Proceedings of the 30th International Conference on Surface Modification Technologies (SMT30).
    2016.
  8. Fazia BOUARABA, Salim LAMRI, Mohammed.Said. BELKAID,
    Optical and structural properties of undoped ZnO thin films prepared by DC reactive magnetron sputtering.
    The International Conference on Electrical Engineering, Batna, Algeria , (October 2016).
    2016.
  9. Zhenming Yue, Houssem Badreddine, Khemais Saanouni,
    Numerical prediction of incremental sheet forming based on ductile damage model with considering distortional hardening.
    NUMIFORM2016, July 4th - 6th 2016, Troyes, France.
    2016.
  10. Mohamed Fares Slim, Akram Alhussein, Manuel François,
    New analytical development to determine the elastic constants of thin films using impulse excitation technique.
    Conference of Materials Science and Engineering (MSE), Darmstadt-Germany.
    2016.
  11. Benjamin Sarre, Sylvain Flouriot, V. De Rancourt, Benoit Panicaud, Guillaume Geandier,
    Mechanical behaviour and fracture mechanisms of Ti-6Al-4V welded joints made by pulsed laser beam welding.
    21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy.
    2016.
  12. Armand Kanjer, Zelin Wu, Pascal Berger, Virgil Optasanu, Steeve Dejardin, Maria Carmen Marco de Lucas, Manuel François, Patrice Peyre, Tony Montesin, Luc Lavisse,
    Influence of surface Shock-peening treatment on high temperature oxidation of Titanium.
    Proceedings of the 30th International Conference on Surface Modification Technologies (SMT30).
    2016.
  13. F. Wang, Alain Rassineux, Carl Labergere, Khemais Saanouni,
    Improving 3D complex crack propagation in tetrahedral element.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  14. Djezouli Moulai-Khatir, Paire Eriv, Pierre-Antoine Adragna,
    Impact du mode de répartition des tolérances sur l’assemblage de lots.
    The International congress for applied mechanics.
    2016.
  15. Mohamed Ali Dhifallah, Carl Labergere, Houssem Badreddine, Khemais Saanouni,
    Fatigue Life prediction methodology applied to 3D mechanical component.
    2th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  16. Souhail Ben Afia, Delphine Retraint, Benoît Panicaud, Jean-Luc Grosseau Poussard,
    Comparison of growth stresses developed in a thermally growing oxide on a nanocrystallised stainless steel, evaluated by in-situ Raman spectroscopy and numerical simulations.
    The 30th International Conference on Surface Modification Technologies (SMT30), Milan (Italy), 29 June - 1st July.
    2016.
  17. Zohra Sendi, Houssem Badreddine, Carl Labergere, Khemais Saanouni,
    Advanced numerical simulation based on a non-local micromorphic model for metal forming processes.
    12th International Conference on Numerical Methods in Industrial Forming Processes, 4-7 July 2016, Troyes, 2016.
    2016.
  18. Szymon Bajda, Dmytra Svyetlichnyy, Delphine Retraint, Janusz Majta, Michal Krzyzanowski,
    3D analysis of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials by duplex technique.
    XXV International Materials Research Congress (IMRC 2016), Cancun (México), 14-19 August.
    2016.
  19. Nada Matta, Guillaume Ducellier,
    Learning from Daily Knowledge : how to capture and structure it in cooperative activity.
    AI4KM Workshop, IJCAI 2015, 10.
    2015.
  20. Amélie Morançais, Pascale Kanouté, Manuel François, Mathieu Fèvre, Anaïs Gaubert,
    Evolution of residual stresses and strain hardening during cycling loading and their impact on fatigue behavior of a single crystal nickel based superalloy.
    12th International Conference on the Mechanical Behavior of Materials (ICM12).
    2015.
  21. Sofiane Achache, Salim Lamri, Manuel François, Frédéric Sanchette,
    Effect of oxygen addition on the properties of quaternary (TNTZ) superelastic thin films obtained by magnetron sputtering.
    EMRS Meetings.
    2015.
  22. Zhidan Sun, Delphine Retraint, Yangcan Wu, Bruno Guelorget, Laurent Waltz,
    Characterization of mechanical behavior of nanocrystalline layer induced by SMAT using micro-pillar compression technique coupled with finite element analysis.
    Nanomechanical Testing in Material Research and Development V, Albufeira, Portugal, October 4-9.
    2015.
  23. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    The Lagrangean description of a continuum corresponds to components of an Eulerian description with a 4D formalism.
    Colloque International des Théories Variationnelles, CITV 2014, Aix en Provence, France.
    2014.
  24. C. Sacristan, T. Dupont, O. Sicot, P. Leclaire, K. Verdière, R. Panneton, Xiao-Lu Gong,
    Etude acoustique des mousses métalliques bicouches avec interface à gradient de propriétés.
    Congrès Francais d'Acoustique 2014 (CFA2014) Poitiers FRANCE 22-25 avril 2014,, 691–697.
    2014.
  25. Joël Faure, Richard Drevet, Nader Ben Jaber, Sylvain Potiron, Clémence Demangel, Delphine Retraint, Hicham Benhayoune,
    Electrophoretic Deposition of Hydroxyapatite and Bioactive Glasses coatings on the Ti6Al4V alloy subjected to Surface Mechanical Attrition Treatment.
    The International Conference on Electrophoretic Deposition V: Fundamentals and Applications (EPD 2014).
    2014.
  26. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy,
    Dynamic Material Flow Analysis of steel: state of art and methodology development.
    Proceedings in the 5th World Resources Forum 2014, 6.
    2014.
  27. Intissar Frih, Pierre-Antoine Adragna, Guillaume Montay, Alexandre Thomas,
    Dimensionnement mécano-fiabiliste des structures soudées en acier à hautes propriétés mécaniques.
    21ème CONGRÉS FRANÇAIS DE MÉCANIQUE [CFM2013].
    2014.
  28. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between residual stress induced by conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on a Titanium alloy.
    9th European Conference on Residual Stresses (ECRS9), Troyes.
    2014.
  29. Houssem Badreddine, Khemais Saanouni, Trong Dung Nguyen,
    The use of an advanced anisotropic damage model to the sheet metal forming simulations.
    The XII International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS2013, September 3-5, 2013, Barcelona, Spain, 6 pages.
    2013.
  30. Laurent Daniel,
    Système Totalement Bourrin de Récupération des Calories des Salles Serveurs.
    Journées Réseaux 2013.
    2013.
  31. Souhail Ben Afia, Delphine Retraint, Benoît Panicaud, Emmanuelle Rouhaud, Arjen Roos, Léa Le Joncour, Matthieu Micoulaut,
    Modélisation par transition d’échelles de la nanocristallisation d’un acier 316L par le procédé SMAT.
    11e Colloque National en Calcul des Structures (CSMA 2013).
    2013.
  32. Wajdi Rajhi, Ahmed Jaballah, Habib Sidhom, Khemais Saanouni,
    Mise en evidence expérimentale de l’anisotropie induite par l’endommagement ductile dans l’acier inoxydable austénitique AISI 316L.
    5ème Congrès International Conception et Modélisation des Systèmes Mécaniques (CMSM’2013), 25-27 Mars 2013, Djerba (Tunisie), 6 pages.
    2013.
  33. Gwénaëlle Proust, Mélanie Gilles, Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Laurent Waltz,
    Microstructural Evolution of Stainless Steel after Surface Mechanical Attrition Treatment and Nitriding.
    The 5th International Conference on Recrystallization and Grain Growth (ReX GG 2013), Sydney (Australia).
    2013.
  34. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Clémence Demangel, Laurent Waltz,
    Influence of a Nanocrystalline surface layer combined with low temperature plasma Nitriding on Microstructure and Tribological Properties of a stainless steel.
    International conference on Materials Innovations in Surface Engineering (MISE 2013), Adelaide (Australia).
    2013.
  35. Frédéric Velard, Christine Guillaume, Florence Draux, Sylvie Bouthors, Clémence Demangel, Yuanyuan Pi, Arnaud Lemelle, Hicham Benhayoune, Delphine Retraint, Dominique Laurent-Maquin,
    In Vitro Evidence that SMAT is a Promising Treatment for the Increasing Lifespan of Orthopaedic Devices.
    The European Society for Biomaterials (ESB2013), Madrid (Spain).
    2013.
  36. Frédéric Velard, Christine Guillaume, Florence Draux, Sylvie Bouthors, Clémence Demangel, Yuanyuan Pi, Arnaud Lemelle, Hicham Benhayoune, Delphine Retraint, Dominique Laurent-Maquin,
    Human Primary Osteoblasts Response to Surface Mechanical Attrition Treatment of Titanium Alloy: A Step Closer toward Expanded Lifespan Implants.
    The Third International Conference on Multifunctional, Hybrid and Nanomaterials, Sorrento (Italy).
    2013.
  37. Mohamed Hamed, Khemais Saanouni,
    Formulation non locale d’un modèle élastoplastique en gradient d’endommagement et d’écrouissage isotrope micromorphiques.
    11ème Colloque National en Calcul des Structures (CSM 2013), 13-17 Mai 2013, Giens, France, 6 pages.
    2013.
  38. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni,
    Experimental characterization and comparison of planar and corrugated aluminum sheets.
    Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 , pp. 1066-1074, Barcelona 3-5 September 2013, Spain, 6 pages.
    2013.
  39. M. Assarar, S. Buet, R. Ayad, Abel Cherouat, Xiao-Lu Gong,
    Effet de vieillissements contrôlés sur le comportement mécanique d’éco-composite à fibres de chanvre.
    JNC18, Journées Nationales sur les Composites, 12-14 Juin 2013 Nantes, 8.
    2013.
  40. Mahdi Chemkhi, Delphine Retraint, Arjen Roos, Guillaume Montay, Clémence Demangel,
    Duplex surface treatments combining surface mechanical attrition treatment (SMAT) and low temperature plasma nitriding.
    The 12th International Workshop on Plasma-Based Ion Implantation and Deposition, Poitiers (France), July 4.
    2013.
  41. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Comparison between conventional shot peening (SP) and surface mechanical attrition treatment (SMAT) on the induced superficial mechanical properties of a Titanium alloy.
    International conference on Materials Innovations in Surface Engineering (MISE 2013) , Adelaide (Australia).
    2013.
  42. Mohamed Hamed, Khemais Saanouni,
    Advanced Nonlocal Elatoplastic Constitutive Equations in the Framework of the Micromorphic Continua.
    CFRAC’2013: the 3rd International Conference on Computational Modeling of fracture and Failure of Material and Strcuture, 5-7 June 2013, Prague, Czech Republic, 6 pages.
    2013.
  43. Jawad Badreddine, Donato Gallitelli, Emmanuelle Rouhaud, Matthieu Micoulaut, Sebastien Remy, Manuel François, V. Desfontaine, F. Château, P. Renaud and G. Doubre-baboeuf,
    Complete simulation of ultrasonic shot peening process.
    Proceedings of the 21st Surface modification Technologies conference (SMT21), Lyon 2012.
    2012.
  44. Trong Dung Nguyen, Houssem Badreddine, Khémais Saanouni,
    Plasticité anisotrope non-associée couplée à un endommagement anisotrope en transformations finies.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  45. Shuai Jin, Xiao-Lu Gong,
    Influence du vieillissement en humidité relative sur les propriétés mécaniques des fibres de chanvre.
    20ème Congrès Français de mécanique. CFM 2011 , Besançon France, Août 2011, 6.
    2011.
  46. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Grenaillage ultrason : expériences et simulations.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  47. Philippe Leclaire, Thoma Dupont, Xiao-Lu Gong, Olivier Sicot,
    Propriétés acoustiques de matériaux poreux saturés d'air incluant une porosité partiellement ouverte.
    10ème Congrès Francais d'Acoustique (CFA10) , Lyon, FRANCE , Avril 2010, 8.
    2010.
  48. Mahdi Chemkhi, Delphine Retraint, Guillaume Montay, Claude Garnier, Farid Belhacene,
    Les plans d'expériences appliqués à l'optimisation des paramètres de nanocristallisation par SMAT (Surface Mechanical Attrition Treatment).
    MATERIAUX 2010 , Nantes, France, Octobre 2010, 11.
    2010.
  49. Mahdi Chemkhi, Nader Ben Jaber, Delphine Retraint, Farid Belahcene,
    Caractérisation ultrasonore de couches nanostructurées par SMAT (Surface Mechanical Attrition Treatment).
    Journées de la Matière Condensée (JMC12), Troyes, Août 2010, 1.
    2010.
  50. Alexandre Durupt, Sebastien Remy, Guillaume Ducellier, Emmanuel Guyot,
    Proposition d'un processus de rétro-conception par extraction des connaissances et techniques de reconnaissances géométriques.
    11ème colloque National AIP Primeca, La Plagne, Avril 2009, 12.
    2009.
  51. Dimitri Van Wijk, Nadège Troussier, Benoit Eynard, Lionel Roucoules, Guillaume Ducellier,
    PLM intéropérable pour la conception intégrée et le travail collaboratif en entreprise.
    Congrès International de Génie Industriel 2009, Tarbes, Juin 2009, 8.
    2009.
  52. Abel Cherouat, R Taiar, Bruno Guelorget,
    Méthode inverse pour la caractérisation du comportement de l'articulation du genou lors de rééducation.
    9ème colloque national en calcul des structures, Giens, Mai 2009, 6.
    2009.
  53. Xiao-Lu Gong, Abel Cherouat,
    Etude de l’indentation des mousses d’aluminium avec le pénétrateur de cône.
    9 ème Congrès de Mécanique , Marrakech, Maroc, 21-24 Avril 2009, 4.
    2009.
  54. Delphine Retraint,
    Effet d'une couche superficielle nanostructurée sur les propriétés mécaniques de pièces métalliques.
    4ème colloque 3M « Matériaux, Mécanique, Microstructures », Saclay, Juin 2009.
    2009.
  55. Carl Labergère, Houssem Badreddine, Wajdi Rajhi, Khémaïs Saanouni, Alain Rassineux,
    Caractérisation numérique de l'endommagement ductile d¿aciers à hautes performances. Essais d¿expansion et de pliage.
    CFM'2009:XIXème congrès Français de Mécanique, Marseille, Août 2009, 6.
    2009.
  56. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier,
    Analyse mécanique et microstructurale d'un matériau multicouches élaboré par co-laminage de tôles nanostructurées par SMAT.
    19ème Congrès Français de Mécanique (CFM19), Marseille, Août 2009, 6.
    2009.
  57. Cochennec F., Emmanuelle Rouhaud, L. Roucoules, B. Flan,
    Numerical and experimental investigation on shot-peening induced deformation. Application to sheet metal forming. Advances in X-ray Analysis,.
    Proceedings of the 8th International Conference on Residual Stresses (ICRS8), Denver USA, 52, 511-518, 2008.
    2008.
  58. Delphine Retraint,
    Le procédé SMAT : de la nanostructuration à l'amélioration des propriétés des surfaces et des propriétés mécaniques des matériaux métalliques.
    journée sur «Les Contraintes Résiduelles» organisée par l'Association de Traitement Thermique et de Traitement de Surface (A3TS), Paris, Février 2008, 9.
    2008.
  59. Maurice Pillet, Pierre-Antoine Adragna, Vincent Ouzouf, Anne Sophie Guerra,
    Pilotage par carte de contrôle dans le cas du tolérancement inertiel.
    Qualita 2007, tanger, Mars 2007, 8.
    2007.
  60. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Modélisation numérique du comportement en compression de Métal poreux -Polymère Composite par homogénéisation.
    18ème CFM 2007, Grenoble France, Août 2007, 6.
    2007.
  61. Hugues Favreliere, Serge Samper, Pierre-Antoine Adragna,
    Métrologie et caractérisation des défauts d¿une surface sphérique.
    4ème Conférence Internationale Conception et Production Intégrées (CPI 2007), rabat, Octobre 2007, 14.
    2007.
  62. C. Cellard, P. Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, A. Viguera-Sancho,
    Laser shock peening on titanium alloys: residual stress and deformations. Proceedings of the 21st International Conference on Surface Modification Technologies.
    Proceedings of the 21st International Conference on Surface Modification Technologies, 24-26 September 2007, Paris..
    2007.
  63. Laurent Waltz, Delphine Retraint, Arjen Roos, Patrick Olier, Jian Lu,
    Comportement mécanique d'une structure multicouche obtenue par co-laminage de tôles nanostructurées par SMAT.
    18ème Congrès Français de Mécanique (CFM2007) , GRENOBLE, Août 2007, 6.
    2007.
  64. Dimitri Denimal, Maurice Pillet, Frédéric Germain, Alain Sergent, Pierre-Antoine Adragna, Max Giordano,
    Comment identifier les défauts les coefficients d¿influence des écarts dans un assemblage ? Contrôler les variations sur les conditions fonctionnelles.
    4ème Conférence Internationale Conception et Production Intégrées (CPI 2007), rabat, Octobre 2007, 13.
    2007.
  65. Pierre-Antoine Adragna, Serge Samper, Hugues Favreliere, Maurice Pillet,
    Analyses des assemblages avec prise en compte des défauts de forme.
    4ème Conférence Internationale Conception et Production Intégrées (CPI 2007), rabat, Octobre 2007, 16.
    2007.
  66. N. Garsot, Y. Liu, Abel Cherouat, Xiao-Lu Gong,
    Modélisation numérique de la compression de mousses métalliques d’aluminium avec cellules ouvertes.
    Matériaux 2006, 14-16 Nov. 2006 Dijon France, sur CD, 8.
    2006.
  67. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Modélisation numérique de la compression de mousses métalliques d¿aluminium avec cellules ouvertes.
    Matériaux 2006, Dijon, Dijon, Novembre 2006, 8.
    2006.
  68. Florent Cochennec, Lionel Roucoules, Emmanuelle Rouhaud,
    Mechanical Analysis to identify knowledge for a DFM approach. Application to Shot Peen-forming process.
    Virtual Concept 2006 conference, Cancun, November 2006, 10.
    2006.
  69. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    7th European Conference on Residual Stress (ECRS), Berlin.
    2006.
  70. Y. Liu, X.L. Gong,
    Interpenetrating microstructure and fracture mechanism of Metal Porous Polymer Composite (MPPC).
    5th Int. Forum on Advanced Material Science and Technology, Hunan, Chine, Juin 2006 CD., 6.
    2006.
  71. Yu Liu, Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Etude expérimentale et numérique de l’indentation des mousses d’aluminium avec cellules ouvertes.
    Matériaux 2006, 14-16 Nov. 2006 Dijon France, sur CD, 8.
    2006.
  72. Yu Liu , Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Etude expérimentale et numérique de l'indentation des mousses d¿aluminium avec cellules ouvertes.
    Matériaux 2006, Dijon, Novembre 2006, 8.
    2006.
  73. Cellard C., P. Osmond, Delphine Retraint, Emmanuelle Rouhaud, Sebastien Remy, A. Viguera-Sancho,
    Application of laser shock peening to titanium alloys: determination of the residual stress profile and deformation.
    Proceedings of the 21st International Conference on Surface Modification Technologies (SMT), Paris France, 24-26 septembre 2006.
    2006.
  74. Maurice Pillet, Pierre-Antoine Adragna, Serge Samper, Fabien Formosa,
    Une approche du contrôle réception avec le tolérancement inertiel.
    4ème Conférence Internationale Conception et Production Intégrées (CPI 2005), casablanca, Novembre 2005, 10.
    2005.
  75. Pierre-Antoine Adragna, Maurice Pillet, Fabien Formosa, Serge Samper,
    Tolérancement inertiel et indice de capabilité dans la production d¿assemblage.
    4ème Conférence Internationale Conception et Production Intégrées (CPI 2005), casablanca, Novembre 2005, 17.
    2005.
  76. Rouquette S., Emmanuelle Rouhaud, H. Pron, Manuel François, C. Bissieux,
    Thermo-elastic-plastic model for shot peening: a numerical and experimental approach.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  77. Nabil Belamri, Abel Cherouat, Khémaïs Saanouni, Philippe Autesserre,
    Simulation numérique du refendage de tôles minces.
    17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.
  78. Philippe Lestriez, Khémaïs Saanouni, Abel Cherouat, Philippe Autesserre,
    Simulation de la coupe orthogonale par couplage thermique-comportement-endommagement en TF.
    17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.
  79. Thierry Roland, Delphine Retraint, Ke Lu, Jian Lu,
    Propriétés mécaniques d'un acier inoxydable nanostructuré.
    17ème congrès français de mécanique (CFM), Troyes, Septembre 2005, 6.
    2005.
  80. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Nouvelle approche dans l¿analyse des contraintes résiduelles par l¿interférométrie de Speckle.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  81. Sébastien Rouquette, Choumad Ould, Emmanuelle Rouhaud, Manuel François, Jean-Louis Chaboche,
    Modélisation thermo-élasto-plastique du procédé de grenaillage par la méthode des éléments finis.
    17ème congrès français de mécanique, Troyes, Août 2005, 6.
    2005.
  82. Bruno Guelorget, Manuel François, C Vial, Laurent Daniel, Jian Lu,
    Mesure de vitesse de déformation par interférométrie électronique de granularité laser (ESPI) sur une tôle de cuivre mi-dur en traction : un nouveau regard sur l'amorçage de la localisation.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  83. Matthieu Micoulaut, Delphine Retraint, Pascal Viot, Manuel François,
    Grenaillage ultrasonore hétérogène.
    17ème congrès français de mécanique, Troyes, Août 2005, 119–124.
    2005.
  84. Houssem Badreddine, Khémaïs Saanouni, Abdelwahab Dogui, Mourad Khelifa, Amen Gahbich,
    Formulation en GD d'un modèle élastoplastique couplé à l'endommagement, , Troyes, 29 août, 2 Septembre, 2005.
    CFM2005, 17ème Congrès Français de Mécanique, Troyes, Août 2005, 6.
    2005.
  85. Emmanuelle Rouhaud, A. Ouakka, C. Ould, J.-L. Chaboche, Manuel François,
    Finite Element model of Shot Peening, Effects of Material’s Constitutive Law.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  86. Xiao-Lu Gong, Sy. He, Y. Liu, Olivier Sicot, Jian Lu,
    Elaboration et étude du comportement en compression d’un nouveau matériau composite :Métal Poreux Polymère Composite (MPPC).
    JNC 14, Compiègne, mars 2005, CD, 8.
    2005.
  87. Xiao-Lu Gong, Sy. He, Jian Lu, Y. Liu,
    Proposition d’un nouveau type de matériau composite : Mousse Métallique-Polymère Composite.
    Journée d’études techniques JET-3 2004, Marrakech Maroc 14-16 avril 2004, 5.
    2004.
  88. Ilyes Ben Naceur, Houman Borouchaki, Abel Cherouat, Jean Marie Bachmann,
    Anisotropic elastoplastic behavior fully coupled with isotropic ductile damage for sheet metal forming.
    7th International conference on Computation Structures Technology (CST2004), Lisbon, Portugal, September 2004.
    2004.
  89. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Optimisation de la méthode du trou incrémental pour la mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  90. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Optimisation de la méthode du trou incrémental pour la mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    16ème Congrès Français de Mécanique, 1-5 sep 2003 Nice, CD ID.129, 6.
    2003.
  91. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles par la méthode du trou incrémental.
    13ème Journées Nationales des Composites, Strasbourg, Mars 2003.
    2003.
  92. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles par la méthode du trou incrémental.
    JNC13, Strasbourg, mars 2003, 1, 63–71.
    2003.
  93. Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles dans les matériaux composites stratifiés.
    13ème Journées Nationales des Composites, Strasbourg, Mars 2003.
    2003.
  94. Guillaume Montay, Abel Cherouat, Jian Lu,
    Influence des contraintes résiduelles dans des dépôts de carbure de tungstène.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  95. Bruno Guelorget, Raul Cordero, Manuel François, Cristian Vial-Edwards, Ignacio Lira,
    Detection par ESPI de la localisation des déformations plastiques dans des tôles d'aluminium.
    Journée scientifique AFM progrès récents des méthodes optiques dans des conditions extrêmes (grandes déformation forte localisation) en mécanique expérimentale, Poitiers, Mai 2003, 6.
    2003.
  96. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Application de la méthode de la flèche à la détermination des contraintes résiduelles dans les composites stratifiés.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  97. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Application de la méthode de la flèche à la détermination des contraintes résiduelles dans les composites stratifiés.
    16ème Congrès Français de Mécanique, 1-5 sep 2003 Nice, CD ID.182, 6.
    2003.
  98. P Lestriez, Abel Cherouat, J.F Mariage, Khémaïs Saanouni,
    Simulation numérique du couplage thermomécanique-endommagement : application à la mise en forme.
    1er Colloque sur les interactions de modèles, expériences en mécanique du solide, Besançon (France), JUILLET 2002.
    2002.
  99. J.F Mariage, Khémaïs Saanouni, P Lestriez, Abel Cherouat,
    Simulation numérique d'un procédé de perçage-ébavurage d'une roue en plasticité avec endommagement.
    Matériaux 2002 de la Conception à la Mise en œuvre, Tours (France), octobre 2002.
    2002.
  100. Abel Cherouat, Guillaume Montay, Jian Lu,
    Méthode numérique et expérimentale pour la détermination des contraintes résiduelles dans les dépôts.
    Matériaux 2002 de la Conception à la Mise en œuvre, Tours (France), octobre 2002.
    2002.
  101. Guillaume Montay, Abel Cherouat, Jian Lu,
    Influence des contraintes résiduelles dans les dépôts de carbure de tungstène : influence de la géométrie et du mode de projection.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux Troyes (France), MARS 2002.
    2002.
  102. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Détermination par la méthode du trou incrémental des contraintes résiduelles dans un alliage TiAl grenaillé par ultrasons.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux, Troyes (France), MARS 2002, 6.
    2002.
  103. Nada Matta, Benoît Eynard, Lionel Roucoules, Marc Lemercier,
    Continuous capitalisation of design knowledge.
    Proceedings of the workshop on Knowledge Management and Organizational Memory, European Conference on Artificial Intelligent (ECAI), Lyon (France), July 2002.
    2002.
  104. Benoît Eynard, Lionel Roucoules, Nada Matta,
    Capitalisation de connaissances en ingénierie collaborative : de la modélisation des données du produit à la traçabilité de la logique de conception.
    Colloque sur l'Ingénierie de la Production et des Organisations Industrielles, IPI, Autrans (France), Janvier 2002.
    2002.
  105. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Approche des contraintes résiduelles dans les composites stratifiés par la méthode de la compliance.
    Colloque GFAC, Caractérisation expérimentale des contraintes : techniques avancées et nouveaux matériaux, Troyes, mars 2002, 173–178.
    2002.
  106. Guillaume Montay, Abel Cherouat, Jian Lu,
    The hole drilling technique applied on complex shapes.
    Annual Conference on Experimental and Applied Mechanics, Portland (Oregon, USA), JUNE 2001, 3.
    2001.
  107. A Elhami, Abel Cherouat, J.L Billoet,
    The frictional contact of the Shaping of the composite fabric.
    5e congrès de mécanique du Maroc, Meknes (Morocco), APRIL 2001, 2.
    2001.
  108. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Optimization of hydroforming processes with respect to fracture.
    4 th Esaform Conference on material forming, liège (Belgium), APRIL 2001, 3.
    2001.
  109. Khémaïs Saanouni, Abel Cherouat, J.F Mariage, Karim Nesnas,
    On the numerical simulation of 3D forging of some complex parts considering the damage occurence.
    4 th Esaform conference on material forming, Liège (Belgium), APRIL 2001, 4.
    2001.
  110. Khémaïs Saanouni, Abel Cherouat, Y Hammi,
    Numerical Simulation of Damage in Metal Forming Processes.
    4th International Conference on Material Forming, ESAFORM, Liege (Belgium), APRIL 2001, 3.
    2001.
  111. Abel Cherouat, J.L Billoet, Houman Borouchaki,
    Nouveau modèle numérique pour la simulation de la déformation des composites à renforts tissés.
    15e Congrès Français de Mécanique, Nancy (France), 2001, 312.
    2001.
  112. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    Nano-scratching process and fracture mechanism of amorphous carbon films.
    3rd International Colloquium-Micro-tribology, , 2001.
    2001.
  113. Liye Huang, Kewei Xu, Jianmin Zhang, Bruno Guelorget,
    Nano-Scratch Behavior of Diamond-like Carbon Films on Silicone Substrate.
    Maison de la Chimie, , 2001, 5.
    2001.
  114. P Breitkofpf, A Rassineux, P Villon, Abel Cherouat, Khémaïs Saanouni,
    Meshfree operators for consistent field transfert in large deformation plasticity.
    ECCM, Cracow (Poland), JUNE 2001.
    2001.
  115. Houman Borouchaki, Abel Cherouat, J.L. Billoet, P De Luca,
    Integration of a new geometrical model for textile forming processes in the Quickform software.
    4th ESAFORM conference on material forming, Liège (Belgium), APRIL 2001, 3.
    2001.
  116. Liye Huang, Kewei Xu, Jian Lu, Bruno Guelorget,
    In vitro assessment of mechanical properties of diamond like carbon films for biomedical application.
    1st International Conference on Biomaterials, China,.
    2001.
  117. Bruno Guelorget, David Gloaguen, Manuel François,
    Evolution de la dureté : un échantillon de Zirconium déformé plastiquement.
    Tarbes (France), NOVEMBRE 2001.
    2001.
  118. Benoît Eynard, Marc Lemercier, Nada Matta,
    Apports des technologies internet et du langage XML dans la constitution de mémoires de projet en conception de produits.
    Colloque Coopération, Innovation et Technologies, CITE'2001, TROYES, NOVEMBRE 2001.
    2001.
  119. J.L Billoet, Abel Cherouat,
    A specific finite element model for composite fabric forming processes.
    4th Esaform Conference on material forming, Liège (Belgium), APRIL 2001, 3.
    2001.
  120. Abel Cherouat, Houman Borouchaki, J.L Billoet,
    Simulation of the laying-up of preimpregnated fabric : numerical tool of the predimensioning and the optimisation of the forming of thin fabric composite parts.
    Journées SF2M, revue de Metallurgie, Paris (France), OCTOBER 2000, 1.
    2000.
  121. Jian Lu, Guillaume Montay, Abel Cherouat, H Bianchi, N Baradel,
    Role of substrate nature and the spraying temperature on the residual stress distribution in plasma sprayed zirconia coating.
    6th International Conference on Residual Stresses, Oxford (United Kingdom), JULY 2000.
    2000.
  122. Khemais Saanouni, Abel Cherouat, Y Hammi,
    Numerical aspects of finite elastoplasticity with damage for metal forming.
    EUROMECH 417 Numerical Modelling in Damage Mechanics, Troyes (France), OCTOBER 2000, 1.
    2000.
  123. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu, P Olivier,
    Nouvelle méthode de mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    12ème Journée Nationale des Composites, Paris (France), NOVEMBRE 2000, 9.
    2000.
  124. J.L Billoet, Houman Borouchaki, Abel Cherouat,
    New numerical tools for virtual textile composite forming.
    5th International Conference on Textile Composite, TEXCOMP'5, Leuven (Belgium), SEPTEMBER 2000, 3.
    2000.
  125. Guillaume Montay, Abel Cherouat, Jian Lu, H Bianchi, N Baradel,
    Modélisation des contraintes résiduelles introduites dans les matériaux multicouches.
    12e Journée Nationale des Composites, Paris (France), NOVEMBRE 2000.
    2000.
  126. J.L Billoet, Abel Cherouat, Houman Borouchaki,
    Mise en forme virtuelle de pièces composites à base de renforts textiles : application aux composites tissés préimprégnés.
    Journées PRIMECA : Prototype virtuel Mythe ou Réalité, ENSIMEV, Valenciennes (France), MARS 2000, 11.
    2000.
  127. Abel Cherouat, Houman Borouchaki, J.L Billoet,
    Mechanical and Geometrical Approaches to Simulate the Shaping Deformation of Composite Fabric.
    European Congress on Computational Methods in Applied Sciences and Engineering, Barcelona (Spain), SEPTEMBER 2000.
    2000.
  128. Guillaume Montay, Abel Cherouat, Jian Lu,
    Incremental hole drilling and X-ray diffraction techniques to measure the residual stresses introduce by shot peening in titanium alloy.
    International Conference Stress Evaluation, MECA-SENS 2000, Reims (France), DECEMBER 2000, 1.
    2000.
  129. J.L Billoet, Houman Borouchaki, Abel Cherouat,
    From the predimensioning approach to the optimisation of forming processes of thin fabric composite parts.
    3nd Internation Conference on Integrated Design and Manufacturing in Mechanical Engineering, Montreal (Canada), MAY 2000, 204.
    2000.
  130. J.L Billoet, Houman Borouchaki, Abel Cherouat,
    Du prédimensionnement à l'optimisation de la mise en forme des textiles composites.
    12ème Journée Nationale des Composites, Cachan (France), NOVEMBRE 2000.
    2000.
  131. Emmanuelle Rouhaud, D. Deslaef,
    Analysis of a Finite Element Model of Shot Peening..
    Proceedings of the 6th International Conference on Residual Stress (ICRS6), Oxford Grande Bretagne, 10-12 juillet 2000..
    2000.
  132. Houman Borouchaki, Alain Milley, Abel Cherouat,
    Simplification de maillages pour les éléments finis et le prototypage rapide.
    Congrès sur la numérisation 3D, design et digitalisation, création industrielle, Paris (France), MAI 1999.
    1999.
  133. Jean-Louis Billoet, Abel Cherouat,
    Numerical Behaviour of Prepreg Woven Fabric for The Simulation of Shaping Deformation.
    4th International Conference and Workshop on Numerical Simulation of 3D sheet Forming Processes? Numesheet'99, Besancon (France), SEPTEMBRE 1999, 5.
    1999.
  134. G. Fadel, I. Tyvaert, Emmanuelle Rouhaud,
    Methodology to Create STL Files Out of Data Point Clouds Generated with the Coordinate Measuring Machine..
    Proceedings of the Tenth Annual Solid Freeform Fabrication Symposium, Austin Etats-Unis, 9-11 août 1999.
    1999.
  135. Abel Cherouat, Jean-Louis Billoet,
    Meso-Structural Behaviour of Composite Fabric for the Simulation of Manufacturing of Thin Composite by Shaping Process.
    12th International Conference of Composite Material, ICCM 12, Paris (France), JUILLET 1999, 1172.
    1999.
  136. Jean-Louis Billoet, Abel Cherouat,
    Mechanical and Numerical Modelling of Composite Manufacturing Processes : Deep-drawing and Laying-up of thin preimpregnated woven fabrics.
    International Conference on Advances in Materials and Processing Technologies, AMPT'99 and 16th Annual on the Irish Manufacturing Commitee, IMC 16, Dublin (Ireland), AOUT 1999, 17.
    1999.
  137. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d’un composite stratifié.
    AMAC, JST Composite, Compiègne, novembre 1999, 6.
    1999.
  138. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    AMAC, Colloque Composite, Compiègne (France), NOVEMBRE 1999.
    1999.
  139. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    AMAC, JST Composite, Compiègne (France), NOVEMBRE 1999.
    1999.
  140. Abel Cherouat, Jean-Louis Billoet,
    Computational Simulation of the Shaping Process of Reinforced Composite Fabric by the Finite Element Method.
    4th International Conference and Workshop on Numerical Simulation of 3D sheet Forming Processes, Besancon (France), SEPTEMBRE 1999, 5.
    1999.
  141. D. Deslaef, Emmanuelle Rouhaud,
    A Dynamic Finite Element Simulation for the Optimization of Shot Peening Processes,.
    Reliability, Failure, Porto Portugal, 19-22 juillet 1999.
    1999.
  142. David Deslaef, Emmanuelle Rouhaud, Shabnam Rasouli-Yazdi,
    3 D finite Element Models of Shot Peening Processes.
    ECRS 5, Zwijndrecht, NL, SEPTEMBER 1999.
    1999.
  143. Abel Cherouat, Jean-Louis Billoet,
    Un modèle élément fini pour la modélisation du comportement des tissus composites à résine non polymérisée lors de la mise en forme.
    2èmes Journées Scientifiques et Techniques en Mécanique et Matériaux, MONASTIR (Tunisie), NOVEMBRE 1998, 7.
    1998.
  144. S Belous, Abel Cherouat, J.L Billoet,
    Two-component finite element model for the simulation of shaping prepreg woven fabric.
    IDMME'98, Compiegne (France), MAI 1998, 7.
    1998.
  145. Zhu Wu, Xiao-Lu Gong, Jian Lu,
    Nouvelle méthodologie de mesure de contraintes résiduelles par la technique de Moire interférométrie et la méthode du trou incrémental.
    JNC'11, ARCACHON (France), NOVEMBRE 1998 -1, 665–674.
    1998.
  146. Abel Cherouat, J.L Billoet, Sid Belhous,
    New finite element approach for the simulation of shaping prepreg woven fabric.
    ICCE/5, LAS VEGAS (NEVADA), JULY 1998, 1.
    1998.
  147. Sid Belhous, Abel Cherouat, Jean-Louis Billoet,
    Modèle élément fini bi-composant pour la simulation Numérique de la Mise en forme de tissus préimprégnés.
    IDMME' 98, COMPIEGNE (France), MAI 1998, 7.
    1998.
  148. David Deslaef, Emmanuelle Rouhaud, Jian Lu,
    Finite Element Modeling of Shot-Peening Processes.
    SEM'98, HOUSTON (Texas, USA), JUNE 1998, 3.
    1998.
  149. Delphine Retraint, Jian Lu,
    Evaluation of residual stresses in an ultrasonic shot-peened aluminium composite.
    SEM'98, HOUSTON (Texas), JUNE 1998, 1.
    1998.
  150. Xiao-Lu Gong, A Laksimi, M.L Benzeggagh,
    Comportement en fatigue du composite en verre-époxyde sous chargement simple et combiné de traction/torsion.
    JNC'11, ARCACHON (France), NOVEMBRE 1998, 731–740.
    1998.
  151. Sid Belhous, Abel Cherouat, Jean-Louis Billoet,
    Approche element fini bi-composant pour la modelisation du comportement des tissus preimpregnes.
    JNC'11, ARCACHON (France), NOVEMBRE 1998, 9.
    1998.
  152. Jean-Louis Billoet, Abel Cherouat,
    Simulation numérique de la mise en forme de pièces composites : drapage et emboutissage.
    Université d'été : Conception et Fabrication Intégrées Assistées par Ordinateur, Cachan (France), SEPTEMBRE 1997.
    1997.
  153. Jean-Louis Billoet, Abel Cherouat,
    Procédure de validation de logiciels éléments finis en approche non linéaire géométrique (grands déplacements et grandes rotations).
    Approche pratique de la mécanique non linéaire, Paris (France), NOVEMBRE 1997, 32.
    1997.
  154. Milley A., Emmanuelle Rouhaud, J. Lu,
    Prediction of Residual Stress Relaxation in Three-Dimensional Structures under Tensile and Torsionnal.
    Proceedings of the 5th International Conference on Residual Stresses (ICRS5), Linköping Suède, 16-18 juin 1997.
    1997.
  155. Alain Milley, Emmanuelle Rouhaud, Jian Lu,
    Prediction of Residual Stress Relaxation in Three-dimensional Structures under Tensil and Torsional Loading.
    ICRS 5, LINKOPING (Sweden), JUNE 1997, 5.
    1997.
  156. Emmanuelle Rouhaud, Alain Milley, Jian Lu,
    Introduction of Residual Stress Fields in Finite Element Three-Dimensional Structures.
    ICRS 5, LINKOPING (Sweden), JUNE 1997, 5.
    1997.
  157. Emmanuelle Rouhaud, A. Milley, J. Lu,
    Introduction of Residual Stress Fields in Finite Element Three Dimensional Structures.
    Proceedings of the 5th International Conference on Residual Stresses (ICRS5), Linköping Suède, 16-18 juin 1997.
    1997.
  158. P Boisse, K Buet, Abel Cherouat,
    Finite element of textile composite forming including the biaxial fabric behaviour. Proceeding of the Third Internation Conference on Composite Engineering.
    Third International Conference on Composite Engineering ICCE/3, NEW ORLEANS, JULY 1996.
    1996.
  159. J.C Gelin, Abel Cherouat,
    Modelling the glass fiber fabrics deformations processes.
    NUMIFORM'95 : Simulation of Materials Processing , Theory Methods and Applications, ITHACA (USA), JUIN 1995, 9.
    1995.
  160. Abel Cherouat, M Borr, P Boisse,
    Modelling of fiber fabric shaping taking into account mezzo-mechanical phenomena. Proceeding of the Second International Conference on Composite Enginerring.
    Second International Conference on Composite Engineering ICCE/2, NEW ORLEANS, AUGUST 1995, 1.
    1995.
  161. P Boisse, Abel Cherouat, J.C Gelin, H Sabhi,
    Modélisation mécanique et numérique du comportement multiaxial des tissus de fibres de verre.
    Congrès Francais de Mécanique, STRASBOURG, 1995.
    1995.
  162. Xiao-Lu Gong, A. Laksimi, D. Lai, M.L Benzeggagh,
    Etude de l'endommagement dans une plaque trouée verre/époxyde soumise à un couple de torsion.
    journée nationale sur les composites (JNC9) Saint-Etienne novembre 1994, 687–697.
    1994.
  163. Ml. Benzeggagh, Xiao-Lu Gong, Xiao-Jing Gong, J.M. Roelandt,
    Evolution de la participation du mode II dans le cas d'un délaminage en mode mixte I+II d'un composite stratifié verre/époxy.
    journée nationale sur les composites (JNC7) Lyon novembre 1990, 509–517.
    1990.

Conference talks with no proceedings

  1. Hmaidouch H., C. Hamdan, B. Latouche, Emmanuel Guyot, Emmanuelle Rouhaud,
    Simulation of mechanical pickling of stainless steel coils.
    ICSP13, Montréal, Canada.
    2017.
  2. Jean-Patrick Goulmy, Emmanuelle Rouhaud, Matthieu Micoulaut, Yann Colaitis,
    Shot-Visual : a software to visualize shot dynamics.
    ICSP13, Montréal, Canada.
    2017.
  3. Jianqiang Zhou, Zhidan Sun, Pascale Kanouté, Delphine Retraint,
    Self-consistent modeling of the mechanical behavior of an austenitic stainless steel under low cycle fatigue loading.
    ICMM5 – 5th International Conference on Material Modelling, Rome, Italy, 13-16 June 2017.
    2017.
  4. Maxime Gelineau, Laurent Barrallier, Emmanuelle Rouhaud, Régis Kubler, Q. Puydt,
    Residual stress field prediction and fatigue post processing for shot peened mechanical parts with complex geometry.
    ICSP13, Montréal, Canada.
    2017.
  5. Rida A., Emmanuelle Rouhaud, Matthieu Micoulaut, Ali Makke, Delphine Retraint,
    Molecular dynamics investigations for surface mechanical attrition treatment.
    ICSP13, Montréal, Canada.
    2017.
  6. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Modelling of the work hardening influence on the relaxation of residual stresses for shot peened Inconel 718 turbine disk.
    ICSP13.
    2017.
  7. Vincent Boyer, Jean-Patrick Goulmy, Maxime Gelineau, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté, Serge Kruch, Laurent Barrallier, Régis Kubler,
    Investigation of relevant experimental parameters for the description of work-hardening in shot peened materials.
    ICSP13, Montréal, Canada.
    2017.
  8. Ali Rida, Ali Makke, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Influence of grain size on the mechanical properties of nano-crystalline copper: insights from molecular dynamics simulation.
    ESAFORM, Dublin, Ireland.
    2017.
  9. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud, Patrice Peyre, Cyril Gorny, Gwénaëlle Proust,
    Experimental analysis of stainless steel 316L treatment by conventional shot peening, ultrasonic shot peening and laser peening processes.
    ICSP13, Montréal, Canada.
    2017.
  10. Gwénaëlle Proust, Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud, Patrice Peyre,
    Comparison of the Effects of Shot Peening, Surface Mechanical Attrition Treatment and Laser Shock Peening on a 316L Stainless Steel.
    7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7), Sydney (Australia), 2-7 July.
    2017.
  11. Camille Bour, Christine Guillaume, Clémence Demangel, Bruno Cauwe, Joël Faure, Hicham Benhayoune, Dominique Laurent-Maquin, Delphine Retraint, Frédéric Velard,
    Can SMAT on UHMWPE be a Process to Limit Aseptic Loosening of Orthopaedic Implants?.
    The 28th European Conference on Biomaterials (ESB2017), Athen (Greece), September 4-8.
    2017.
  12. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Assessment of shot-peening on fatigue life of Inconel 718 turbine disk.
    ICSP13.
    2017.
  13. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Analyses expérimentale et numérique des contraintes résiduelles et de l’écrouissage générés au cours du grenaillage de l’inconel 718 Direct Aged.
    Colloque Mecamat, Aussois, France.
    2017.
  14. Vincent Boyer, Jean-Patrick Goulmy, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    A constitutive model for simulation of shot-peening and fatigue.
    ICSP13, Montréal, Canada.
    2017.
  15. Felaniaina Rakotovao, Zhaojun Tao, Benoit Panicaud, Jean-Luc Grosseau-Poussard, Patrick Girault, Gilles Bonnet, Guillaume Geandier, Pierre-Olivier Renault, Philippe Goudeau, Nathalie Boudet, Nils Blanc, Henry Vitoux, Bernard Gorges,
    Viscoplasticbehaviour of thermally grown oxide obtained by synchrotron radiation diffraction.
    Colloque on Metallurgy at the Mines School of Saint Etienne.
    2016.
  16. F. Rakotovao, Z. Tao, Benoit Panicaud, J.L. Grosseau-Poussard, P. Girault, G. Bonnet, G. Geandier, P.O. Renault, P. Goudeau, N. Boudet, N. Blanc, H. Vitoux, B. Gorges,
    Viscoplastic behaviour of thermally grown oxide obtained by synchrotron radiation diffraction.
    Colloque de l’école des Mines de Saint-Etienne, 27 juin au 1er juillet 2016, Saint-Etienne,.
    2016.
  17. Van Tuan Dang, Pascal Lafon, Carl Labergere, Laurent Daniel,
    Surrogate models for sheet metal stamping problem based on the combination of Proper Orthogonal Decomposition and Radial Basis Function.
    Engineering Mechanics Institute International Conference.
    American Society of Civil Engineers, 2016.
  18. Maxime Gelineau, Laurent Barrallier, Emmanuelle Rouhaud, Régis Kubler,
    Residual stress field prediction in shot peened mechanical parts with complex geometries.
    ICRS10, Sydney, Australie.
    2016.
  19. Maxime Gelineau, Emmanuelle Rouhaud, Laurent Barrallier, Régis Kubler,
    Residual stress field prediction in shot peened mechanical parts with complex geometries.
    ICOMP2016, Liège, Belgique.
    2016.
  20. Daniella Tchana, Delphine Retraint, Hicham Benhayoune, Clémence Demangel, Gwénaëlle Proust,
    Residual stress evaluation using hole-drilling method on a Co-Cr-Mo alloy after a nanocrystallisation surface treatment.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  21. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Relaxation thermique des contraintes résiduelles dans l’Inconel 718 : grenaillage et aspects microstructuraux.
    A3TS, Nancy, France.
    2016.
  22. Szymon Bajda, Dmytra Svyetlichnyy, Delphine Retraint, Michal Krzyzanowski,
    Modelling of grain refinement around highly reactive interfaces in processing of nanocrystallised multilayered metallic materials.
    Applied Nanotechnology and Nanoscience International Conference (ANNIC16).
    2016.
  23. Carl Labergere, Khemais Saanouni, F. Bumbieler,
    Modeling and Simulation of the long term mechanical behavior of a steel casing subjected to general corrosion.
    EMI International Conference, Metz, France, 25-27 October, 2016.
    2016.
  24. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, ,
    Modèle analytique pour le calcul des contraintes résiduelles après grenaillage classique ou ultrasonore.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov..
    2016.
  25. Jianqiang Zhou, Zhidan Sun, Pascale Kanouté, Delphine Retraint,
    Low cycle fatigue properties of an austenitic stainless steel 316L processed by surface mechanical attrition treatment.
    15th European Mechanics of Materials Conference (EMMC15), Brussels, Belgium, 2016.
    2016.
  26. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, S. Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Influence of initial microstructure of IN718 on the residual stresses and the work hardening induced by shot peening.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  27. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud, ,
    Influence du grenaillage sur de vie de disque de turbine en Inconel 718.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov..
    2016.
  28. K.Cheour, M.Assarar, D.Scida, R.Ayad, Xiao-Lu Gong,
    Identification of damping properties of vegetal-fibre reinforced composites.
    1ière conférence Euromaghrébine des BioComposites, le 28-29 Mars 2016 à Marrakech, Maroc.
    2016.
  29. K Cheour, M Aaaarar, D Scida, R Ayad, Xiao-Lu Gong, JM Bertholot,
    Hybridation effect on the mechanical and dynamical properties of glass-flax and carbon-flax fibre reinforced epoxy composites.
    2nd International Conference on Mechanics of Composites. 11-14 July 2016 Porto, Portugal.
    2016.
  30. Denis Boivin, Nicolas Horezan, Pascale Kanouté, Serge Kruch, Yves Renollet, D. Retraint,
    Fatigue resistance of N18 nickel based superalloy treated by surface mechanical attrition treatment (SMAT).
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  31. Emmanuelle Rouhaud, Benoit Panicaud, Mingchuan Wang, F. Sidoroff, Richard Kerner,
    Eulerian approach with the Lie derivative for a thermodynamic construction of hyperelastic models.
    CITV, La Rochelle, France.
    2016.
  32. Ali Rida, Emmanuelle Rouhaud, Matthieu Micoulaut, Ali Makke,
    Etude des propriétés mécaniques des matériaux métalliques nanocristallins élaborés par grenaillage ultrason : approche par dynamique moléculaire.
    journée ROMEO, Reims.
    2016.
  33. Fazia BOUARABA, Salim LAMRI, Nora ZIANI, Mohammed Said BELKAID,
    Effects of oxygen flow rate on the properties of ZnO thin films prepared by DC reactive magnetron sputtering..
    International Conference on Fracture Mechanics "FRACT'3", Chlef, Algeria (November 2016)..
    2016.
  34. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy, Jean-Pierre Birat, Philippe Russo,
    Dynamic Material Flow Analysis of steel in Europe.
    10th Society and Materials International Conference, Rome, Italy.
    2016.
  35. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    Constitutive models for elastoplasticity from a 4D thermodynamic construction and its applications to the simulation of large deformations.
    NUMIFORM Troyes, France.
    2016.
  36. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Caractérisation par DRX des contraintes résiduelles et de l'écrouissage générés au cours du grenaillage de l'Inconel 718 Direct Aged.
    GFAC, Toulouse, France.
    2016.
  37. Vincent Boyer, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, ,
    Caractérisation par DRX des contraintes résiduelles et de l'écrouissage générés au cours du grenaillage de l'Inconel 718 Direct Aged.
    Groupement Français d'Analyses des Contraintes Résiduelles, Toulouse, 17-18 nov.
    2016.
  38. Maxime Gelineau, Laurent Barrallier, Emmanuelle Rouhaud, Régis Kubler, Q. Puydt,
    Caractérisation et modélisation des contraintes résiduelles de grenaillage dans les pièces à géométrie complexe.
    GFAC, Toulouse, France.
    2016.
  39. Jean-Patrick Goulmy, Vincent Boyer, Louise Toualbi, Pascale Kanouté, Serge Kruch, Delphine Retraint, Emmanuelle Rouhaud,
    Assessment of shot-peening on fatigue life of Inconel 718 turbine disk.
    International Conference on Fatigue Damage of Structural Materials XI, Hyannis Resort and Conference Center, Hyannis, MA (USA), 18-23 September.
    2016.
  40. C. Hamdan, Emmanuelle Guyot, Emmanuelle Rouhaud, B. Latouche,
    A model of shot dynamic for conventional shot peening processes.
    ICOMP2016, Liège, Belgique.
    2016.
  41. Vincent Boyer, Jean-Patrick Goulmy, Emmanuelle Rouhaud, Delphine Retraint, Louise Toualbi, Pascale Kanouté,
    A constitutive model for simulation of shot-peening and fatigue.
    2nd International Conference on COmputational methods in Manufacturing Processes (ICOMP16) Liège (Belgium), 18-20 May.
    2016.
  42. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, F. Sidoroff, Richard Kerner,
    The covariance principle and a 4D formalism for rate formulations of constitutive models.
    ICDM2, Troyes, France.
    2015.
  43. Amélie Morançais, Manuel François, Pascale Kanouté, Mathieu Fèvre, Anaïs Gaubert,
    Prise en compte de l’effet du grenaillage dans l’analyse de durée de vie des aubes de turbine monocristallines.
    journée MAIA, SafranTech.
    2015.
  44. Amélie Morançais, Manuel François, Pascale Kanouté, Mathieu Fèvre, Anaïs Gaubert,
    Prise en compte de l’effet du grenaillage dans l’analyse de durée de vie des aubes de turbine monocristallines.
    Journées de Printemps de la Commission Fatigue de la SF2M.
    2015.
  45. Benoit Panicaud, Emmanuelle Rouhaud, Mingchuan Wang, F. Sidoroff, Richard Kerner,
    Eulerian approach with the Lie derivative for a thermodynamic construction of 4D constitutive models. Application to elasto-plastic materials undergoing finite deformations.
    ICMM4, Berkeley, Etats-Unis.
    2015.
  46. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy, Jean-Pierre Birat, Philippe Russo,
    Estimation of in-use stock in Europe.
    ISIE conference 2015 - Taking stock of industrial ecology.
    2015.
  47. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy,
    Dynamic Material Flow Analysis of steel in Europe.
    9th Society and Materials International Conference, SAM9, Luxembourg.
    2015.
  48. Mathieu Fèvre, Amélie Morançais, Manuel François,
    Détermination des contraintes résiduelles dans les monocristaux, application aux superalliages.
    Colloque Rayons X & Matière, Grenoble, 1-4 décembre 2015.
    2015.
  49. Emmanuelle Rouhaud, C. Gay, Benoit Panicaud,
    Conditions to establish hyper-elasticity from hypoelastic models. Application to the identification of models of complex fluids.
    CMM4, Berkeley, Etats-Unis.
    2015.
  50. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy,
    Analyse dynamique de flux des matières: état d’art et développement d’une méthodologie.
    14ème colloque nationale « Produits, Procédés, Systèmes, intelligents et durables », AIP Primeca, La Plagne, France.
    2015.
  51. Guillaume Altmeyer, Emmanuelle Rouhaud, Benoit Panicaud, Mingchuan Wang, Richard Kerner, Arjen Roos,
    Viscoelasticity modeling in finite transformations using Lie derivative. Application to Maxwell time models..
    24th International Workshop on Computational Micromechanics of Materials (IWCMM24), Madrid, Spain,.
    2014.
  52. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    The rate of deformation is a true rate – Application to elastic-inelastic decompositions.
    European Mechanics of Materials Conference (EMMC14), Gothenburg, Sweden.
    2014.
  53. Chengheri Bao, Léa Le Joncour, Manuel François,
    Strain Localization monitored by Speckle Pattern Interferometry.
    European Mechanics of Materials Conference (EMMC-14) Gothenburg Sweden August 27-29 2014.
    2014.
  54. Ali Makke, Benoît Panicaud, Zhidan Sun, Lea Le Joncour, Delphine Retraint, Emmanuelle Rouhaud,
    Plastic deformation and damage initiation in nanocrystalline metals.
    International Colloquium of Mechanics - Multi-physics modeling of solids, Paris, October 6-8.
    2014.
  55. Emmanuelle Rouhaud, F. Dussoulier, Matthieu Micoulaut, Jawad Badreddine, Sebastien Remy, Delphine Retraint, Donato Galitelli, Guillaume Montay, Manuel François, Vincent Desfontaine, Pierre Renaud,
    Model of shot dynamics for shotpeening of parts with complex geometries.
    First International Conference on Computational methods in Manufacturing (ICOMP14) Saint-Etienne, France.
    2014.
  56. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, Jawad Badreddine, Carl Labergère, Manuel Francois,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  57. Lahouari Benabou, Zhidan Sun,
    Finite element simulation of cracking from sulfur-induced dynamic embrittlement in a polycrystalline copper specimen.
    International Colloquium of Mechanics - Multi-physics modeling of solids, Paris, October 6-8.
    2014.
  58. Daryna Panasiuk, Bertrand Laratte, Sébastien Remy,
    Dynamic Material Flow analysis: state of art and methodology development.
    8th Society and Materials International conference, 20-21 Mai, Liège.
    2014.
  59. Emmanuelle Rouhaud, O. Ameline, Guillaume Altmeyer, Benoit Panicaud, Mingchuan Wang, Arjen Roos, Richard Kerner,
    Construction of frame-indifferent constitutive models for viscoelastic materials undergoing finite transformations with the four-dimensional formalism of the theory of relativity.
    9th International Conference on the Mechanics of Time-Dependent Materials (MTDM), Montréal.
    2014.
  60. Jawad Badreddine, Matthieu Micoulaut, Sebastien Remy, Emmanuelle Rouhaud, Pierre Renaud, F. Chateau, Vincent Desfontaine,
    A model for ultrasonic shot peening: optimization of chamber design in an industrial context.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  61. Benoit Panicaud, Mingchuan Wang, Emmanuelle Rouhaud, Arjen Roos, Richard Kerner,
    On the use of a four-dimensional formalism to build linear or non-linear anisotropic elastic behaviors. Application to micromechanical problems.
    International workshop on Computational mechanics of Materials (IWCMM XXIII) Singapore,.
    2013.
  62. Benoit Panicaud, Emmanuelle Rouhaud, Richard Kerner, Arjen Roos,
    On the use of a four-dimensional formalism to build hypo-elastic or visco-elastic constitutive behavior models.
    Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), Montréal, Canada.
    2013.
  63. Souhail Benafia, Delphine Retraint, Benoît Panicaud, Léa Le Joncour, Emmanuelle Rouhaud, Matthieu Micoulaut,
    Modelling of grain refinement induced by SMAT process, using a complete numerical chaining methodology.
    Proceedings of the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNSMP), Oulu Finland.
    2013.
  64. Mohamed Hamed, Khemais Saanouni,
    Elastoplastic nonlocal micromorphic formulation with damage and hardening gradients.
    The XII International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS2013, September 3-5, 2013, Barcelona, Spain.
    2013.
  65. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling and numerical simulation of ductile damage in cold bulk metal forming.
    46th ICFG Plenary Meeting, Paris September 15th to 18th, 2013.
    2013.
  66. Emmanuelle Rouhaud, Benoit Panicaud, Richard Kerner,
    Stress rate definitions with the four-dimensional formalism of differential geometry.
    International workshop on Computational mechanics of Materials (IWCMM XXII) Baltimore USA.
    2012.
  67. Delphine Retraint, Clémence Demangel,
    Nanocristallisation de surface de biomatériaux : une voie pour améliorer leurs propriétés mécaniques et leur résistance à l'usure.
    Journée sur les implants orthopédiques, Strasbourg, Mars 2012.
    2012.
  68. Gwénaëlle Proust, Mélanie Gillles, Laure Aschehoug, Pat Trimby, Mahdi Chemkhi, Delphine Retraint, Arjen Roos,
    Microstructural evolution of stainless steel after surface treatments.
    Workshop Nanospec on EBSD, Sydney, November 2012.
    2012.
  69. Miriam Kozemjakin da Silva, Tatiana Reyes, Sebastien Remy,
    Environmental traceability in product lifecycle.
    IEEE International Symposium on Sustainable Systems and Technology, Boston, May 2012, 2.
    2012.
  70. Delphine Retraint, Clemence Demangel, Mahdi Chemkhi, Yuanyuan Pi, Hicham Benhayoune, Sami Jelliti, Caroline Richard,
    Biomatériaux : les apports d'un traitement de surface de nanocristallisation.
    Forum Innovation MEDTECH (conférence invitée), Lyon, Avril 2012.
    2012.
  71. Laurent Waltz, Pascale Kanouté, Delphine Retraint,
    Mechanical characterization of a SMATed 316L stainless steel: use of cyclic nanoindentation.
    European Congress on Advanced Materials and Processes (Euromat 2011), Montpellier, September 2011.
    2011.
  72. Wiem Toumi Ajimi, Farid Belahcene, Jazzar Hoblos, Delphine Retraint, Guillaume Montay,
    In situ ultrasonic non destructive evaluation of applied stress in prestressed bars.
    European congress and exhibition on advanced materials and processes, Montpellier, Septembre 2011.
    2011.
  73. Benoit Panicaud, Delphine Retraint, Jean-Luc Grosseau-Poussard, M Guérain,
    Experimental study on the mechanical effects of a nano-crystallization treatment during high temperature oxidation of ZrO2 oxide films growing on Zr alloy.
    European Congress on Advanced Materials and Processes (Euromat 2011), Montpellier, September 2011.
    2011.
  74. Wiem Toumi Ajimi, Farid Belahcene, Jazzar Hoblos, Delphine Retraint, Guillaume Montay,
    Evaluation non destructive, par ultrasons, de l'effort présent dans des barres de précontrainte en service.
    20ème Congrès Français de Mécanique, Besançon, Août 2011.
    2011.
  75. Guillaume Montay, Emmanuelle Rouhaud, A Sornin,
    Analyse des contraintes résiduelles par la méthode de la rainure et du trou incrémental.
    Oujda 10ième Congrès de Mécanique, 19, 22 Avril 2011, Oujda, Maroc.
    2011.
  76. Cochennec F., Emmanuelle Rouhaud, B. Flan, L. Roucoules,
    Numerical simulation of peen forming induced deformation: modeling and experimental validation.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  77. Jawad Badreddine, Emmanuelle Rouhaud, Delphine Retraint, Matthieu Micoulaut, Manuel François,
    Modeling of ultrasonic shot peening: dynamic of shot during the peening process.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  78. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Modeling of ultrasonic shot peening : Dynamic of shot during the peening process.
    ECRS-8, Riva del Garda , June 2010.
    2010.
  79. Mahdi Chemkhi, Delphine Retraint, Guillaume Montay, Farid Belahcene,
    Les plans d'expériences appliqués à l'optimisation des paramètres de nanocristallisation par SMAT.
    JMC12, Troyes, France, Août 2010.
    2010.
  80. Cochennec F., Emmanuelle Rouhaud, Manuel François, Lionel Roucoules,
    Eigenstrain based model for incremental hole drilling residual stress measurement.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  81. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    On the modelling of initial and induced anisotropies for the accurate numerical simulation of sheet and bulk metal forming processes.
    FTF'2009: Forming Technology Forum, Zurich, Suisserland, May 2009.
    2009.
  82. Delphine Retraint, Claude Garnier, Delphine Auzene,
    Effet d¿une couche nanocristalline superficielle sur les propriétés tribologiques de matériaux métalliques.
    Journée Nationale sur « Les conditionnements mécaniques et chimiques des surfaces appliqués aux pièces mécaniques », Le Mans, Octobre 2009.
    2009.
  83. Khemais Saanouni, Houssem Badreddine, Carl Labergère,
    Advanced Modelling in metal forming including the ductile damage occurrence.
    PLASTICITY 2009, Saint Thomas, USA, January 2009.
    2009.
  84. N. Hirai, K. Tosha, Emmanuelle Rouhaud,
    Finite Element Analysis of Shot Peening -On the Profile of a single dent.
    Proceedings of the 10th International Conference on Shot Peening, Tokyo, Japan, 15-18 septembre 2008.
    2008.
  85. A. Maras, Guillaume Montay, O. Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by Speckle Interferometry combined with the drill of a groove.
    Proceedings of the 13rd International Conference on Experimental Mechanics (ICEM13), Alexandroupolis Grèce, 1- 6 juillet 2007..
    2007.
  86. S. Rouquette, Emmanuelle Rouhaud, Arjen Roos, H. Pron, Manuel François, C. Bissieux,
    Thermomechanical modeling of a steel plate impacted by a shot and experimental validation..
    The 7th European Conference on Residual Stresses (ECRS7), Berlin Allemagne, 13-15 septembre 2006..
    2006.
  87. H. Nobuyuki, K. Tosha, Emmanuelle Rouhaud,
    Finite Element Analysis of Shot Peening-On the form of a single dent.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  88. Emmanuelle Rouhaud, D. Deslaef,
    Influence of shot’s material on shot peening, a finite element model.
    Materials Science Forum, The 6th European Conference on Residual Stresses (ECRS6) Coimbra, 2002.
    2002.
  89. J.L. Billoet, Abel Cherouat, Houman Borouchaki,
    La simulation de la mise en forme de pièces composites dans la chaîne de conception virtuelle.
    Journées S3P: Simulation de Produits, de Procédés et de Processus industriels, Biarritz (France), 2001.
    2001.
  90. Delphine Retraint, Claude Garnier, Bruno Guelorget, Jian Lu,
    Study of the influence of ultrasonic shot peening on the fatigue behaviour of a 41CR4 steel.
    Integrity Reliability Failure, Porto, June 1999, 112.
    1999.
  91. D. Deslaef, Emmanuelle Rouhaud,
    A Dynamic Finite Element Simulation for the Optimization of Shot Peening Processes.
    Integrity, Reliability, Failure, Porto Portugal, 19-22 juillet 1999..
    1999.
  92. David Deslaef, Emmanuelle Rouhaud,
    A dynamic finite element simulation for the optimisation of shot peening processes.
    IRF 99, Porto, Portugal, JULY 1999.
    1999.
  93. P Bonhomme, G Balossier, Delphine Retraint, J Michel,
    Potentialités de la microscopie électronique analytique à transmission pour l'étude de l'interface os/implant.
    Colloque sur les Biomatériaux, Reims, OCTOBRE 1996.
    1996.
  94. Emmanuelle Rouhaud, G.I. Zahalak,
    Interaction Between Contraction and Metabolism in Skeletal Muscle: A Distribution-Moment Model.
    Distribution-Moment Model, IVth International Symposium on Computer Simulation in Biomechanics, Montlignon France, 1-3 juillet 1993.
    1993.

Conference posters

  1. Vincent Boyer, Jean-Patrick Goulmy, Delphine Retraint, Emmanuelle Rouhaud, Louise Toualbi, Pascale Kanouté, Serge Kruch,
    Analyse expérimentale et numériques des contraintes résiduelles et de l’écrouissage générés au cours du grenaillage de l’Inconel 718 Direct Aged.
    Colloque MECAMAT – Fatigue des Structures et des Matériaux – Aussois, 24-27 janvier.
    2017.
  2. Luciane Yumi Suzuki de Oliveira, C. Eliana, B. Marino, Carlos Siqueira, Delphine Retraint, N. Kazue Kuromoto,
    Ti6Al4V surface modification with SMA treatment: Tribological studies and fragments characterization.
    9th Latin American Congress on Artificial Organs and Biomaterials (COLAOB 2016), Foz do Igaçu (Brazil), 24-27 august.
    2016.
  3. Donato Gallitelli, Delphine Retraint, Emmanuelle Rouhaud,
    Surface Mechanical Attrition Treatment effect on gas nitriding treatment of a martensitic steel.
    The 10th International Conference on Residual Stresses (ICRS10), Sydney (Australia), 3-7 July.
    2016.
  4. F. Rakotovao, Z. Tao, Benoit Panicaud, P. Girault, G. Bonnet, J.L. Grosseau-Poussard, G. Geandier, P.O. Renault, P. Goudeau, N. Boudet, N. Blanc, H. Vitoux, B. Gorges,
    Stress build-up and relaxation in chromia scales during high temperature oxidation.
    3. 9th International Symposium on High-Temperature Corrosion and Protection of Materials (HTPCM2016), 15-20 May 2016, Les Embiez, France.
    2016.
  5. Imane Bouabibsa, Salim Lamri, Frédéric Sanchette,
    Properties of Ti and Al co-doped diamond-like carbon coating deposited by hybrid process RF PECVD/PVD.
    2016.
  6. Benjamin Sarre, Sylvain Flouriot, Thomas Paris, Benoit Panicaud, Khemais Saanouni, Guillaume Geandier, Elisabeth Aeby-Gautier,
    Multiscale investigation of the mechanical behavior of a TA6V welded joint.
    MMM Dijon.
    2016.
  7. Zhaojun Tao, Felaniaina Rakotovao, Jean-Luc Grosseau-Poussard, Benoit Panicaud, Guillaume Geandier, Pierre-Olivier Renault, Philippe Goudeau, Nathalie Boudet, Nils Blanc, ,
    Modelling of the Mechanical Behaviour of a Chromia Forming Alloy Under Thermal Loading.
    9th International Symposium on High-Temperature Corrosion and Protection of Materials (HTPCM2016), 15-20 May 2016, Les Embiez, France.
    2016.
  8. Lamia Radjehi, Salim Lamri, Djelloul Abdelkader, Frederic Sanchette.,
    Electrical and Structural properties of Cu2O thin films deposited at different temperatures by magnetron sputtering. Lamia Radjehi, Salim Lamri, Djelloul Abdelkader,.
    Garmisch- Partenkirchen, Germany, September 2016..
    2016.
  9. Mingchuan Wang, Emmanuelle Rouhaud, Benoit Panicaud,
    Conditions to establish hyperelasticity from hypoelastic models and vice-versa,.
    Mecamat, Aussois, France.
    2016.
  10. Alicia Duran, Javier Signorelli, Diego Celentano, Maria Cruchaga, Manuel François,
    Numerical Simulation of the Forming Limit Curves of a Heat Treated AA110-H14 Aluminium Alloy Sheet using an Efficient Implementation of VPSC based MK model.
    WCCM 2014, ECCM V & ECFD VI, 20-25 juillet 2014, Barcelone, Espagne.
    2014.
  11. F. Dussoulier, Donato Gallitelli, Emmanuelle Rouhaud, Jawad Badreddine, Delphine Retraint, Matthieu Micoulaut,
    Models for shot dynamics: conventional and ultrasonic shot peening.
    9th European Conference on Residual Stresses (ECRS9), Troyes.
    2014.
  12. Mingchuan Wang, Benoit Panicaud, Emmanuelle Rouhaud, Guillaume Altmeyer, Richard Kerner, Arjen Roos,
    Incremental constitutive equation for elastoplasticity in finite transformations using a four-dimensional formalism..
    Multi-Physics modeling of solids (MPMS) Palaiseau, France.
    2014.
  13. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni, Manuel François, Virginie Lacote,
    Experimental Characterization and Comparison of Plane and Corrugated Aluminium Sheets Behavior.
    ESAFORM 2013, Aveiro University, 22-24 avril 2013, Portugal.
    2013.
  14. Sofiane Achache, Salim Lamri, Mohamed Arab Pour Yazdi, Alain Billard, Manuel François, Frederic Sanchette.,
    Elaboration and characterization of Beta-titanium super elastic coatings (Beta-TSEC) obtained by dc magnetron sputtering..
    12th International Workshop onPlasma-Based Ion Implantation and Deposition, Poitiers, France,.
    2013.

Scientific books (or chapters)

  1. Nada Matta, Hassan Atifi, Guillaume Ducellier,
    Daily Knowledge Valuation in Organizations.
    ISTE-Willey, 2016.
  2. Benoît Panicaud, Léa Le Joncour, Neïla Hfaeidh, Khemais Saanouni,
    Micromechanical Polycrystalline damage-Plasticity Modeling for metal forming processes.
    Handbook of Damage Mechanics, Nano to Macro Scale for Materials and Structures 2, 963 – 1020.
    Springer, 2015.
  3. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.
  4. Khemais Saanouni, Mohamed Hamed, Carl Labergère, Houssem Badreddine, ,
    Ductile Damage in Metal Forming.
    Handbook of Damage Mechanics Advanced Macroscopic Modeling and Numerical Simulation, 815–875.
    Springer, 2015.
  5. Frederic Sanchette, C. Ducros, G. Ravel,
    Nanolayered Hard Coatings for Mechanical Applications.
    Nanomaterials and Surface Engineering, 227–246.
    John Wiley and Sons, 2013.
  6. Frederic Sanchette, C. Ducros, Alain Billard,
    Aluminum-Based Nanostructured Coatings Deposited by Magnetron Sputtering for Corrosion Protection of Steels.
    Nanomaterials and Surface Engineering, 207–226.
    John Wiley and Sons, 2013.
  7. Pierre-Antoine Adragna, Pascal Hernandez,
    A new method of expressing functional requirements and how to allocate tolerance to parts.
    Product Life-Cycle Management, Geometric Variations, 1–14.
    ISTE Wiley, 2013.
  8. Alice Yalaoui, Hicham Chehade, Farouk Yalaoui, Lionel Amodeo,
    Optimization of logistics.
    HP-ISTE Ltd/John Wil, London, 2012.
  9. khemais saanouni,
    Damage Mechanics in metal forming. Advanced modeling and numerical simulation.
    ISTE/Wiley, 2012.
  10. Nisrine Jrad, Pierre Beauseroy, Édith Grall-Maes,
    Learning multiclass rules with class-selective rejection and performance constraints.
    Pattern Recognition Recent Advances, 1–24.
    IN-TECH, VIENNE, 2010.
  11. Hugues Favreliere, Serge Samper, Pierre-Antoine Adragna,
    Caractérisation des défauts d'une surface sphérique.
    Revue Internationale d'Ingénierie Numérique : Conception Collaborative et Simulation 1.
    2009.
  12. Pierre-Antoine Adragna, Hugues Favreliere, Serge Samper, Maurice Pillet,
    Statistical assemblies with form errors ¿ a 2D example.
    Micro-Assembly Technologies and Applications, 23–33.
    springer, boston, 2008.
  13. Maurice Pillet, Dimitri Denimal, Pierre-Antoine Adragna, Serge Samper,
    Interest of the inertial tolerancing method in the case of watch making micro assembly.
    Micro-Assembly Technologies and Applications, 189–197.
    springer, boston, 2008.
  14. Pierre-Antoine Adragna, Serge Samper, Fabien Formosa, Maurice Pillet,
    Modal Tolerancing ¿ Application to Gap and Flush Analysis.
    Advances in Integratd Design and Manufacturing in Mechanical Engineering II, 417–430.
    springer, dordrecht, 2007.
  15. Frédéric Germain, Max Giordano, Pierre-Antoine Adragna,
    Tacking Manufacturing dispersions into account for assembly: modelling and simulation.
    Journal of Machine Engineering : Manufacturing Accuracy Increasing Problems - Optimization, 83–94.
    drukarnia oficyny, wroclaw, 2006.
  16. Pierre-Antoine Adragna, Maurice Pillet, Fabien Formosa, Serge Samper,
    Inertial tolerancing and capability indices in an assembly production.
    Revue Internationale d'Ingénierie Numérique : Conception Collaborative et Simulation, 71–88.
    lavoisier, cachan, 2006.
  17. Maurice Pillet, Pierre-Antoine Adragna, Frédéric Germain,
    Inertial Tolerancing : The Sorting Problem.
    Journal of Machine Engineering : Manufacturing Accuracy Increasing Problems - Optimization, 95–102.
    drukarnia oficyny, wroclaw, 2006.
  18. Pierre-Antoine Adragna, Serge Samper, Maurice Pillet, Hugues Favreliere,
    Analysis of shape deviations of measured geometries with a modal basis.
    Journal of Machine Engineering : Manufacturing Accuracy Increasing Problems - Optimization, 134–143.
    drukarnia oficyny, wroclaw, 2006.
  19. Laurence Giraud-Moreau, Houman Borouchaki, Abel Cherouat,
    A Remeshing Procedure for Numerical Simulation of Forming Processes in Three Dimensions.
    15th International Meshing Roundtable, 127–143.
    Springer, New York, 2006.
  20. Delphine Retraint, Céline Pile, Claude Garnier, Jian Lu,
    ultrasonic shot peening.
    Handbook on residual stress, 146–159.
    SEM, USA, 2005.
  21. Emmanuelle Rouhaud, David Deslaef, Jian Lu, Jean-Louis Chaboche,
    Modeling of Residual Stress, Shot Peening.
    Handbook on residual stress, 116–148.
    SEM, USA, 2005.
  22. Abel Cherouat, Jean-Louis Billoet, Sid Belhous,
    Two-component finite element model for the simulation of shaping prepreg woven fabrics.
    Integrated Design and Manufacturing in Mechanical Engineering, 323–330.
    Kluwer Academic Publishers, Dordrecht (Pays Bas), 1999.
  23. Jian Lu, Caroline Richard, M Mellali, Pierre Fauchais, Gerard Beranger, Michel Jeandin,
    Optimisation of the residual stresses in thermal spraying coating materials.
    Surface modification technologies VIII, 817–823.
    IOM COMMUNICATIONS L, London, 1995.

Popularization books (or chapters)

  1. Micoulaut Matthieu, Emmanuelle Rouhaud, Emmanuel Guyot,
    Site d’information sur ShotVisual.
    2016.
  2. Clémence Demangel, Delphine Retraint,
    La nanocristallisation renforce les prothèses articulaires en CoCrMo.
    DeviceMed, 48–49.
    2016.

Books or journal issues directions

  1. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Proceedings of the 9th International Conference on Residual Stresses (ECRS-9).
    Adavanced Materials Research 996.
    Trans Tech Publications, 2014.
  2. Nada Matta, Guillaume Ducellier,
    Special issue on Knowledge Management and collaboration.
    International Journal of Knowledge Management Research and Practices 10.4 and 11.4(4).
    2013.

PhD theses

  1. Miriam Kozemjakin Da Silva,
    Study of the impact of information collected during the design process on the environmental expert.
    2014.
  2. Keqin Wang,
    Knowledge discovery in manufacturing quality data to support product design decision making.
    Université de technologie de Troyes, 2010.
  3. Guillaume Ducellier,
    Gestion de règles expertes en ingénierie collaborative : application aux plateformes PLM.
    2008.

Other productions

  1. delphine Retraint,
    Surface Mechanical Attrition Treatment (SMAT): from nanostructure formation to enhanced mechanical and wear properties.
    invited seminar, Civil Engineering School, University of Sydney (Australia), 11 juillet.
    2016.
  2. delphine Retraint,
    How to Enhance Mechanical and Wear Properties of Metals by Creating a Superficial Nanocrystalline Layer.
    invited seminar, Materials & Surface Science Institute, University of Limerick (Ireland), 8 mai.
    2015.
  3. Alexandre Leblanc, Xia Lu Gong, Youcef Bouzidi, Catalin Popa, François Henry,
    Efficience par la Simulation, l’Eco-conception et les Matériaux pour le chauffage électrique..
    Rapport de recherche.
    2015.
  4. Emmanuelle Rouhaud, Delphine Retraint,
    Shot peening processes, Materials and Mechanics.
    Invited seminar, Laboratory for Multi-Scale Mechanics / Mechanical Engineering, École Polytechnique de Montréal, Montréal, Canada, April 24th.
    2014.
  5. Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Metal Finishing News.
    Metal Finishing News 4, 26–29.
    2003.
  6. Emmanuelle Rouhaud, Alain Milley,
    Rapport issu d'un contrat avec un équipementier automobile.
    2001.
  7. Benoît Eynard, Nada Matta, Lionel Roucoules, B Carratt, M Gouel, Sébastien Charles,
    Etat des travaux de recherche dans le cadre du projet ENHANCE.
    2001.
  8. Manuel Zacklad, Nada Matta, Hassan Atifi, Imed Boughzala, Benoît Eynard, Myriam Lewkowicz, Lionel Roucoules, Eddie Soulier,
    Actes de Coopération, Innovation, Technologie, CITE'2001, Troyes.
    2001.