Peer-reviewed journal articles indexed in international databases

  1. Yuchen Zhao, Léa Le Joncour, Andrzej Baczmanski, Elzbieta Gadalińska, Sebastian Wroński, Benoît Panicaud, Manuel François, Chedly Braham, Thomas Buslaps,
    Stress distribution correlated with damage in duplex stainless steel studied by synchrotron diffraction during plastic necking.
    Materials and Design 113, 157–168.
    Elsevier, 2017.
  2. Armand Kanjer, Virgil Optasanu, Luc Lavisse, Maria Carmen Marco de Lucas, Steeve Dejardin, Manuel François, Pascal Berger, Patrice Peyre, Cyril Gorny, Tony Montesin,
    Influence of mechanical surface treatment on high temperature oxidation of pure-titanium.
    Oxidation of Metals.
    Springer, 2017.
  3. Yunlong Zhu, Julien Vaillant, Manuel François, Guillaume Montay, Aurelien Bruyant,
    Co-axis digital holography based on sinusoidal phase modulation using generalized lock-in detection.
    Applied Optics 56(13), F97–F104.
    Optical Society of America, 2017.
  4. Mohamed Fares Slim, Akram Alhussein, Frederic Sanchette, Bruno Guelorget, Manuel François,
    An enhanced formulation to determine Young's and shear moduli of thin films by means of Impulse Excitation Technique.
    Thin Solid Films 631, 172–179.
    Elsevier, 2017.
  5. Sofiane Achache, Akram Alhussein, Salim Lamri, Manuel François, Frederic Sanchette, Cesar Pulgarin, John Kiwi, Sami Rtimi,
    Sputtered Gum metal thin films showing bacterial inactivation and biocompatibility.
    Colloids and Surfaces B: Biointerfaces 146, 687–691.
    Elsevier, 2016.
  6. Mohamed Fares Slim, Akram Alhussein, Alain Billard, Frederic Sanchette, Manuel François,
    On the determination of Young’s modulus of thin films with impulse excitation technique.
    Journal of Materials Research 32, 1–15.
    Cambridge - Materials Research Society, 2016.
  7. Sofiane Achache, Salim Lamri, Akram Alhussein, Alain Billard, Manuel François, Frederic Sanchette,
    Gum Metal thin films obtained by magnetron sputtering of a Ti-Nb-Zr-Ta target.
    Materials Science & Engineering A 673, 492–502.
    Elsevier, 2016.
  8. Andrzej Baczmański, Yuchen Zhao, Elzbieta Gadalińska, Léa Le Joncour, Sebastian Wroński, Chedly Braham, Benoît Panicaud, Manuel François, Thomas Buslaps, K. Soloducha,
    Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model.
    International Journal of Plasticity 81, 102–122.
    2016.
  9. Chengheri Bao, Manuel François, Léa Le Joncour,
    A closer look at the diffuse and localized necking of a metallic thin sheet - evolution of the two bands pattern.
    Strain, 244–260.
    Wiley, 2016.
  10. Frédéric Menan, Pierre-Antoine Adragna, Manuel François,
    The Stress-Strength Interference Method Applied to Fatigue Design: the Independence of the Random Variables.
    Procedia Engineering 133, 746 – 757.
    Elsevier, 2015.
  11. Amélie Morançais, Mathieu Fèvre, Manuel François, Pascale Kanouté, Serge Kruch, Arnaud Longuet,
    Residual stress determination in a shot-peened nickel-based single crystal superalloy using X-ray diffraction.
    Journal of Applied Crystallography 48, 1761–1776.
    International Union of Crystallography / Wiley, 2015.
  12. Sofiane Achache, Salim Lamri, Arab Pour Yazdi, Alain Billard, Manuel François, Frédéric Sanchette,
    Ni-free superelastic binary Ti-Nb coating obtained by DC magnetron co-sputtering.
    Surface and Coatings Technology 275, 283–288.
    Elsevier, 2015.
  13. Alicia I. Durán, Javier W. Signorelli, Diego J. Celentano, Marcela A. Cruchaga, Manuel François,
    Experimental and numerical analysis on the formability of a heat treated AA1100 aluminum alloy sheet.
    Journal of Materials Engineering and Performance 24(10), 4156–4170.
    Springer, 2015.
  14. Yugang Li, Pascale Kanouté, Manuel François,
    Disturbance induced by surface preparation on instrumented indentation test.
    Materials Science and Engineering A 642, 381–390.
    Elsevier, 2015.
  15. Andrzej Baczmanski, Elzbieta Gadalinska, Sebastian Wronski, Léa Le Joncour, Benoît Panicaud, Manuel François, Chedly Braham, Vincent Klosek, Anna Paradowska,
    Study of Stresses in Texture Components Using Neutron Diffraction.
    Materials Science Forum 768-769, 289–295.
    Trans Tech Publications, 2014.
  16. A. Baczmański, E. Gadalińska, C. Braham, S. Wroński, Léa Le Joncour, Benoît Panicaud, Manuel Francois, V. Klosek,
    Study of micromechanical behaviour of two phase polycrystalline materials using diffraction and self consistent model.
    Materials Science Forum 783-786, 2059–2064.
    2014.
  17. Andrzej Baczmanski, Elzbieta Gadalinska, Sebastian Wronski, Chedly Braham, Wilfrid Seiler, Manuel François, Léa Le Joncour, Benoît Panicaud, Thomas Buslaps, Houda Yahyaoui, Habib Sidhom, Yuchen Zhao,
    Study of mechanical behaviour of polycrystalline materials at the mesoscale using high energy X-ray diffraction.
    Advanced Materials Research 996, 118–123.
    Trans Tech Publications, 2014.
  18. Kun Jia, Mohammad Khayway, Yugang Li, Jean-Louis Bijeon, Pierre-Michel Adam, Régis Déturche, Bruno Guelorget, Manuel François, Guy Louarn, Rodica Eléna Ionescu,
    Strong improvements of LSPR sensitivity by using Au/Ag bi-metallic nanostructures modified with poly-dopamine films.
    ACS Applied Materials & Interfaces 6, 219–227.
    ACS, 2014.
  19. Johann Petit, Guillaume Montay, Manuel François,
    Strain rate measurements by speckle interferometry for necking investigation in stainless steel.
    Int. J. of Solids and Structures 51, 540–550.
    Elsevier, 2014.
  20. Carl Labergère, Bruno Guelorget, Manuel François,
    Strain Rate Distribution and Localization Band Width Evolution during Tensile Test.
    International Journal of Solids and Structures 51(23-24), 3944–3961.
    Elsevier, 2014.
  21. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Preface.
    Advanced Materials Research 996.
    2014.
  22. Amélie Morançais, Mathieu Fèvre, Manuel François, Pascale Kanouté, Serge Kruch,
    Impact of residual stresses on the fatigue behavior of a Nickel‐based superalloy.
    Materials Science Forum 768-769, 747–754.
    Trans Tech Publications, 2014.
  23. Fabien Lefebvre, Eric Wasniewski, Manuel Francois, J. Cacot, P. Le-Bec, E. Baumhauer, D. Bouscaud, T. Bergey, D. Blaize, D. Gloaguen, A. Cosson, S. Jegou, Y. Cheynet, S. Leray, M. Meheux, J.C. Monvoisin, P. Allain, J.C. Vidal, J.M. Sprauel, P. Goudeau, C. Charles, L. Daflon, C. Fischer, L. Desmas, A. Ouakka, M.J. Moya, Y. Bordiec, H. Hamdi,
    External reference samples for residual stress analysis by X-ray diffraction.
    Advanced Materials Research 996, 221–227.
    Trans Tech Publications, 2014.
  24. F. Lefebvre, E. Wasniewski, Manuel Francois, J. Cacot, P. Le-Bec, E. Baumhauer, D. Bouscaud, T. Bergey, D. Blaize, D. Gloaguen, A. Cosson, S. Jegou, Y. Cheynet, S. Leray, M. Meheux, J.C. Monvoisin, P. Allain, J.C. Vidal, J.M. Sprauel, P. Goudeau, C. Charles, L. Daflon, C. Fischer, L. Desmas, A. Ouakka, M.J. Moya, Y. Bordiec, H. Hamdi,
    External reference samples for residual stress analysis by X-ray diffraction.
    Advanced Materials Research 996, 221–227.
    Trans Tech Publications, 2014.
  25. Houda Yahyaoui, Habib Sidhom, Chedly Braham, Andrzej Baczmanski, Manuel Francois, Wilfrid Seiler,
    Effect of interlamellar spacing on the monotonic behavior of C70 pearlitic steel.
    Advanced Materials Research 996, 88–93.
    Trans Tech Publications, 2014.
  26. Yugang Li, Pascale Kanouté, Manuel François,
    Characterization of residual stresses and accumulated plastic strain induced by shot peening through simulation of instrumented indentation.
    Advanced Materials Research 996, 367–372.
    Trans Tech Publications, 2014.
  27. Laura Raceanu, Virgil Optasanu, Tony Montesin, Guillaume Montay, Manuel François,
    Shot-peening of pre-oxidized plates of zirconium: Influence of residual stress on oxidation.
    Oxidation of Metals 79(1-2), 135–145.
    Springer, 2013.
  28. Yugang Li, Pascale Kanouté, Manuel François,
    Influence of residual stress and work hardening on instrumented indentation.
    Matériaux & Techniques 101(3), 306–311.
    EDP Sciences, 2013.
  29. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Sébastien Remy, Delphine Retraint, Manuel François,
    Effect of the confinement on the properties of ultrasonic vibrated granular gases.
    Granular Matter 15(3), 367–376.
    Elsevier, 2013.
  30. Manuel François, Benoît Panicaud, Léa Le Joncour, Andrzej Baczmanski, Ana Paradowska, Sebastian Wronski, Elzbieta Gadalinska,
    Comparison of strain/stress behaviour of a duplex stainless steel between mesoscopic and macroscopic scales by neutron measurements extended to the necking range.
    Thin Solid Films 530, 62–65.
    Elsevier, 2013.
  31. Andrzej Baczmanski, Léa Le Joncour, Anita Gaj, Sebastian Wronski, Manuel François, Benoît Panicaud, Chedly Braham, Anna Paradowska,
    Study of stress localization in polycrystalline grains using self-consistent model and neutron diffraction.
    Philosophical Magazine 92(24), 3015–3035.
    Taylor and Francis, 2012.
  32. Diego Celentano, Bruno Guelorget, Manuel François, Marcella Cruchaga, Amara Slimane,
    Numerical simulation and experimental validation of the microindentation test applied to bulk elastoplastic materials.
    Modelling and Simulation in Materials Science and Engineering 20(4).
    IOP Science, 2012.
  33. Johann Petit, Laurent Waltz, Guillaume Montay, Delphine Retraint, Arjen Roos, Manuel François,
    Multilayer modelling of stainless steel with a nanocrystallised superficial layer.
    Materials Science and Engineering: A 536, 124–128.
    Elsevier, 2012.
  34. Christophe Cellard, Delphine Retraint, Manuel François, Emmanuelle Rouhaud, Didier Le Saunier,
    Laser shock peening of Ti-17 titanium alloy: influence of process parameters.
    Materials Science & Engineering A 532, 362–372.
    Elsevier, 2012.
  35. Manuel François, Benoît Panicaud, Léa Le Joncour, Andrzej Baczmanski, Anna Paradowska, Sebastian Wronski, Elizabetha Gadalinska,
    Comparison of strain/stress behaviour of duplex stainless steels between mesoscopic and macroscopic scales by neutron measurements extended to the necking range.
    Thin Solid Films 530, 62–65.
    Elsevier, 2012.
  36. Benoit Panicaud, Khemais Saanouni, Andrzej Baczmanski, Manuel François, Lionel Cauvin, Lea Lejoncour,
    Theoretical modelling of ductile damage in Duplex stainless steels- Comparison between two micro-mechanical elastoplastic approaches..
    Computational Materials Science 50, 1908–1916.
    2011.
  37. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Simulation and experimental approach for shot velocity evaluation in ultrasonic shot peening.
    Mécanique et Industries 12, 223–229.
    EDP Sciences, Les Ulis, FRANCE, 2011.
  38. A. Baczmanski, Léa Le Joncour, Benoît Panicaud, Manuel Francois, C. Braham, A.M. Paradowska, S. Wronski, S. Amara, R. Chiron,
    Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture.
    Journal of Applied Crystallography 44(5), 966–982.
    2011.
  39. Anita Gaj, Léa Le Joncour, Andrzej Baczmanski, Sebastian Wronski, Benoît Panicaud, Manuel François, Chedly Braham, Anna Paradowska,
    Localization of stresses in polycrystalline grains measured by neutron diffraction and predicted by selfconsistent model.
    Materials Science Forum 681, 103–108.
    Trans Tech Publications, 2011.
  40. Johann Petit, Guillaume Montay, Manuel François,
    Localisation phenomenon investigation on SMATed stainless steel samples by speckle interferometry.
    Strain 47(4), 363–371.
    2011.
  41. Andrzej Baczmanski, Léa Le Joncour, Benoît Panicaud, Manuel François, Chedly Braham, Anna Paradowska, Sebastian Wronski, Slimane Amara, Robert Chiron,
    Duplex steel at small and large deformation until damage: neutron diffraction and self-consistent model,.
    Journal of Applied Crystallography 44(5), 966–982.
    International Union of Cristallography, 2011.
  42. Benoît Panicaud, Ludovic Cauvin, Léa Le Joncour, Andrzej Baczmanski, Khémaïs Saanouni, Manuel François,
    Analysis of ductile damage – Comparison between micromechanical models an neutron diffraction experiments.
    Materials Science Forum 681, 91–96.
    Trans Tech Publications, 2011.
  43. Léa Le Joncour, Benoît Panicaud, A. Baczmański, Manuel Francois, C. Braham, A. Paradowska,
    Large deformation and mechanical effects of damage in aged duplex stainless steel.
    Materials Science Forum 652, 155–160.
    2010.
  44. Léa Le Joncour, Benoît Panicaud, A. Baczmański, Manuel Francois, C. Braham, A. Paradowska, S. Wroński, R. Chiron,
    Damage in duplex steels studied at mesoscopic and macroscopic scales.
    Mechanics of Materials 42(12), 1048–1063.
    2010.
  45. Guillaume Montay, Olivier Sicot, Afaf Maras, Emmanuelle Rouhaud, Manuel François,
    Two dimensions residual stresses analysis through incremental groove machining combined with electronic speckle pattern interferometry.
    Experimental Mechanics 49(4), 459–469.
    2009.
  46. Johann Petit, Guillaume Montay, Manuel François,
    Strain rate evolution in aluminium alloy measured by ESPI during tensile test.
    Materials Science Forum 614, 155–162.
    2009.
  47. Bruno Guelorget, Manuel François, Guillaume Montay,
    Strain localization band width evolution by electronic speckle pattern interferometry strain rate measurement.
    Scripta Materialia 60(8), 647–650.
    2009.
  48. N. Hfaiedh, Khemais Saanouni, Manuel François, Arjen Roos,
    Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials.
    Procedia Engineering 1(1), 229–232.
    2009.
  49. Sébastien Rouquette, Emmanuelle Rouhaud, Manuel François, Arjen Roos, Jean-Louis Chaboche,
    Coupled thermo-mechanical simulations of shot impacts: Effects of the temperature on the residual stress field due to shot peening.
    Journal of materials processing technology 209(8), 3879–3886.
    2009.
  50. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, Christian Vial-Edwards, Ignacio Lira,
    Strain and strain rate measurement during the bulge test by electronic speckle pattern interferometry.
    Journal of Materials Processing Technology 184(1-3), 428–435.
    2007.
  51. Bruno Guelorget, Manuel François, Jian Lu,
    Microindentation as a local damage measurement technique.
    Materials letters 61, 34–36.
    2007.
  52. Matthieu Micoulaut, Sergei Mechkov, Delphine Retraint, Pascal Viot, Manuel François,
    Granular gases in mechanical engineering : on the origin of heterogeneous ultrasonic shot-peening.
    Granular Matter 9(1-2), 25–33.
    2007.
  53. Bruno Guelorget, Manuel François, Cheng Liu, Jian Lu,
    Extracting the plastic properties of metal materials from microindentation tests: experimental comparison of recently published methods.
    Journal of materials research 22(6), 1512–1519.
    2007.
  54. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, Christian Vial-Edwards, Ignacio Lira,
    Analysis of plastic strain localization by a combination of the speckle interferometry with the bulge test.
    Optics and Lasers in Engineering 45(1), 222–228.
    2007.
  55. Bruno Guelorget, Manuel François, Christian Vial-Edwards, Guillaume Montay, Laurent Daniel, Jian Lu,
    Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset.
    Materials Science and Engineering A 415(1-2), 234–241.
    2006.
  56. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by Speckle Interferometry.
    Materials Science Forum 524-525, 465–470.
    2006.
  57. Mohammed Amen Gahbiche, Ammari, Tarek Benameur, Manuel François, Bruno Guelorget, Abdel Dogui,
    Textures and mechanical responses with strain path in Fe PO4.
    International journal of forming processes 8(2), 0–0.
    2005.
  58. Céline Pile, Manuel François, Delphine Retraint, Emmanuelle Rouhaud, Jian Lu,
    Modelling of ultrasonic shot-peening process.
    Materials science forum 490, 67–72.
    2005.
  59. Matthieu Micoulaut, Serguei Mechkov, Delphine Retraint, Pascal Viot, Manuel François,
    Granular gases in mechanical engineering : on the origin of heterogeneous ultrasonic shot-peening.
    ArXiv : condensed matter 9(1-2), 0–6.
    2005.
  60. Céline Pilé, Delphine Retraint, Manuel François, Jian Lu,
    Effect of very high stress levels on the fatigue life of a TiAl based alloy.
    Materials science forum 490, 418–423.
    2005.
  61. Tarek Benameur, Khalil Hajlaoui, Alain Reza Yavari, Bruno Guelorget, Manuel François,
    synchrotron radiation and instrumented indentation studies of compressive plastic deformation in Zr-based bulk metallic glasses.
    Journal of Metastable and Nanocrystalline Materials -1, 425–434.
    2004.
  62. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Generation of extremely hight stress levels in a TiAl based alloy.
    Materials science forum 404, 89–94.
    2002.

Unindexed peer-reviewed journal articles

  1. Chengheri Bao, Manuel François, Léa Le Joncour,
    Influence of Specimen Geometry on Strain Localization Phenomena in Steel Sheets.
    Applied Mechanics and Materials 784, 514–519.
    Trans Tech Publications, 2015.
  2. Sébastien Rouquette, Emmanuelle Rouhaud, Arjen Roos, Hervé Pron, Manuel François, Christian Bissieux,
    Thermomecanical modeling of a steel plate impacted by a shot and experimental validation.
    Materials science forum 524, 167–172.
    2006.
  3. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    Materials science forum 524, 161–166.
    2006.
  4. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    A new approach in residual stresses analysis by speckle interferometry.
    Materials science forum 524, 465–470.
    2006.
  5. Choumad Ould, Emmanuelle Rouhaud, Manuel François, Jean-Louis Chaboche,
    A kinematic hardening finite elements model to evaluate residual stresses in shot-peened parts, local measurements by X-ray diffraction.
    Materials science forum 524, 161–166.
    2006.

Invited conference talks

  1. Manuel François, Delphine Retraint, Emmanuelle Rouhaud,
    Mesure des contraintes résiduelles par méthodes optiques.
    Les contraintes résiduelles dans les pièces en titane : génération, mesure, effet sur la fatigue Séminaire, ISAE, Toulouse, 29 janvier.
    2013.
  2. Emmanuelle Rouhaud, Delphine Retraint, Guillaume Montay, L. Roucoules, Manuel François,
    Shot peening processes: Form elaboration to XAO.
    Mechanical Surface treatment, Second French German meeting, Karlsruhe Allemagne, 15 novembre 2006.
    2006.

Proceedings articles indexed in international databases

  1. Mohamed Fares Slim, Akram Alhussein, Frederic Sanchette, Manuel François,
    Determination of Elasticity Constants of Isotropic Thin Films Using Impulse Excitation Technique.
    19th International Conference on Experimental Mechanics and Applications, Madrid-Spain, 26-27 March 2017. 4(3), 734.
    World Academy of Science, Engineering and Technology - International Journal of Aerospace and Mechanical Engineering, 2017.
  2. Amélie Morançais, Mathieu Fèvre, Manuel François, Nicolas Guel, Serge Kruch, Pascale Kanouté, Arnaud Longuet,
    Shot-peened Nickel based Single Crystal Superalloy : From Measurements to Modeling.
    13th International Symposium on Superalloys (Superalloys 2016).
    2016.
  3. Amélie Morançais, Mathieu Fèvre, Manuel Francois, Nicolas Guel, Serge Kruch, Pascale Kanouté, Arnaud Longuet,
    Influence of residual stresses on the fatigue life of a shot-peened nickel-based single crystal superalloy: From measurements to modeling.
    Proceedings of the International Symposium on Superalloys 2016-January, 867–876.
    Huron E.,Glatzel U.,Rae C.,Tin S.,Lewis B.,Seetharaman V.,Hardy M.,Griffin B., 2016.
  4. Johann Petit, Danièle Wagner, Nicolas Ranc, Guillaume Montay, Manuel François,
    Comparison of different techniques for the monitoring of the Piobert-Lüders bands development.
    13th International Conference on Fracture (ICF13), Beijing 26-30 mai 2013 5, 3797–3809.
    2013.
  5. Hassène Bouzaiene, Mohamed Ayadi, Manuel François, Bruno Guelorget,
    Influence of clamping and cooling on the distribution of residual stresses in Friction Stir Welding of aluminum alloy.
    International Conference on Manufacturing Engineering and Technology for Manufacturing Growth METMG 2012, San Diego, November 2012, 6.
    2012.
  6. Donato Gallitelli, Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Carl Labergère, Manuel François,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    9th International Conference on Residual Stresses (ICRS-9), Garmisch-Partenkirchen, October 2012, 6.
    2012.
  7. Jawad Badreddine, Donato Gallitelli, Matthieu Micoulaut, Emmanuelle Rouhaud, Sebastien Remy, Manuel François, Vincent Desfontaines, F. Chateau, P. Renaud, Gaelle Doubre-Baboeuf,
    Complete Simulation of ultrasonic shot-peening process.
    26th International Conference on Surface Modification Technologies (SMT-26), Lyon, June 2012, 6.
    2012.
  8. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Impact velocity and distribution in ultrasonic shot peening.
    International Conference on Shot Peening - ICSP11, South Bend - USA, September 2011, 6.
    2011.
  9. N. Hfaiedh, Khemais Saanouni, Manuel François, Arjen Roos,
    Self consistent intragranular ductile damage modelling in large plasticity for FCC polycrystalline materials.
    Procedia Engineering 1(1), 229–232.
    2009.
  10. A. Baczmański, Benoît Panicaud, Manuel François, Khemais Saanouni, N. Hfaiedh, K. Wierzbanowski,
    Study of damage process using self-consistent elastoplastic model.
    Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 1181–1185.
    2008.
  11. Christophe Cellard, Delphine Retraint, Emmanuelle Rouhaud, Manuel François, Ana Viguera-Sancho,
    Laser Shock Peening of a Titanium Alloy: Influence of Process Parameters.
    ICSP 10 (International Conference on Shot Peening), Tokyo, September 2008, 6.
    2008.
  12. Guillaume Montay, Bruno Guelorget, Ignacio Lira, Marie Tourneix, Manuel François, Cristian Vial-Edwards,
    Strain localization analysis by combination of the ESPI with bulge test.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  13. Bruno Guelorget, Manuel François, Guillaume Montay,
    Strain evaluation in the neck of a tensile test specimen by ESPI strain rate measurement.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  14. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by speckle interferometry combined with the drill of a groove.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  15. Bruno Guelorget, Manuel François, Jian Lu,
    Evaluation of damage and plastic properties by microindentation and inverse method.
    13th International Conference on Experimental Mechanics, Alexandroupolis, July 2007, 6.
    2007.
  16. Bruno Guelorget, Manuel François, Guillaume Montay, Laurent Daniel, Jian Lu,
    Uncertainty evaluation of strain rate measurement by ESPI during a tensile test.
    Speckle 06, Nimes, September 2006, 6.
    2006.
  17. Sébastien Rouquette, Emmanuelle Rouhaud, Hervé Pron, Manuel François, Christian Bissieux,
    Thermo-elasto-plastic model for shot peening : a numerical and experimental approach.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 6.
    2005.
  18. Matthieu Micoulaut, Delphine Retraint, Pascal Viot, Manuel François,
    Heterogeneous ultrasonic shot-peening : experiments and simulations.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 119–124.
    2005.
  19. Emmanuelle Rouhaud, Jean-Louis Chaboche, Manuel François, Choumad Ould, Sébastien Rouquette,
    Finite elements model of shot-peening, effects of material's constitutive law.
    9th international conference on shot-peening, Marne-la-Vallée, September 2005, 6.
    2005.
  20. Cristian Vial-Edwards, Bruno Guelorget, Manuel François, Ignacio Lira, Marcello Münzenmayer,
    Determination of forming limits of sheet metals by electronic speckle pattern interferometry.
    8th international symposium on laser metrology, Mérida, Mexico, February 2005, 9.
    2005.
  21. Guillaume Montay, Manuel François, Marie Tourneix, Bruno Guelorget, C Vial,
    Combinaison de l'interférométrie de speckle à l'essai de gonflement pour l'analyse la localisation.
    CMOI, MARSEILLE, Novembre 2005, 6.
    2005.
  22. Guillaume Montay, Ignacio Lira, Marie Tourneix, Bruno Guelorget, Manuel François, C Vial,
    Analysis of localization of strains by ESPI, in equibiaxial loading (bulge test) of copper sheet metals.
    fringe 2005, stuttgart, Septembre 2005, 4.
    2005.

Unindexed proceedings articles

  1. Elena Vakhitova, Denis Sornin, F. Barcelo, Manuel François,
    Texture evolution in Oxide Dispersion Strengthened (ODS) steel during tubes pilgering process.
    Proceedings of the 18th International Conference on Textures of Materials (ICOTOM-18).
    2017.
  2. Evangelia Diamantopoulou, Carl Labergere, Bruno Guelorget, Manuel François, Khemais Saanouni,
    An experimental-numerical study of the plastic flow localization based on a generalized micromorphic formulation.
    Proceedings of the 5th International Conference on Material Modeling (ICMM5).
    2017.
  3. Armand Kanjer, Zelin Wu, Pascal Berger, Virgil Optasanu, Steeve Dejardin, Maria Carmen Marco de Lucas, Manuel François, Tony Montesin, Luc Lavisse,
    Retarding the high temperature oxidation of Titanium by shot-peening surface treatment.
    Proceedings of the 30th International Conference on Surface Modification Technologies (SMT30).
    2016.
  4. Mohamed Fares Slim, Akram Alhussein, Manuel François,
    New analytical development to determine the elastic constants of thin films using impulse excitation technique.
    Conference of Materials Science and Engineering (MSE), Darmstadt-Germany.
    2016.
  5. Armand Kanjer, Zelin Wu, Pascal Berger, Virgil Optasanu, Steeve Dejardin, Maria Carmen Marco de Lucas, Manuel François, Patrice Peyre, Tony Montesin, Luc Lavisse,
    Influence of surface Shock-peening treatment on high temperature oxidation of Titanium.
    Proceedings of the 30th International Conference on Surface Modification Technologies (SMT30).
    2016.
  6. Amélie Morançais, Pascale Kanouté, Manuel François, Mathieu Fèvre, Anaïs Gaubert,
    Evolution of residual stresses and strain hardening during cycling loading and their impact on fatigue behavior of a single crystal nickel based superalloy.
    12th International Conference on the Mechanical Behavior of Materials (ICM12).
    2015.
  7. Sofiane Achache, Salim Lamri, Manuel François, Frédéric Sanchette,
    Effect of oxygen addition on the properties of quaternary (TNTZ) superelastic thin films obtained by magnetron sputtering.
    EMRS Meetings.
    2015.
  8. Jawad Badreddine, Donato Gallitelli, Emmanuelle Rouhaud, Matthieu Micoulaut, Sebastien Remy, Manuel François, V. Desfontaine, F. Château, P. Renaud and G. Doubre-baboeuf,
    Complete simulation of ultrasonic shot peening process.
    Proceedings of the 21st Surface modification Technologies conference (SMT21), Lyon 2012.
    2012.
  9. Jawad Badreddine, Emmanuelle Rouhaud, Matthieu Micoulaut, Delphine Retraint, Sébastien Remy, Manuel François, Pascal Viot, Gaelle Doubre-Baboeuf, Didier Le Saunier, Vincent Desfontaine,
    Grenaillage ultrason : expériences et simulations.
    20ème Congrès Français de Mécanique, Besançon, Août 2011, 6.
    2011.
  10. Afaf Maras, Florent Cochennec, Emmanuelle Rouhaud, Guillaume Montay, Manuel François,
    Introduction of residual stresses as initial conditions and the study of their correlation with Almen arc height.
    7th European Conference on Residual Stress (ECRS), Berlin.
    2006.
  11. Rouquette S., Emmanuelle Rouhaud, H. Pron, Manuel François, C. Bissieux,
    Thermo-elastic-plastic model for shot peening: a numerical and experimental approach.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  12. Afaf Maras, Guillaume Montay, Olivier Sicot, Emmanuelle Rouhaud, Manuel François,
    Nouvelle approche dans l¿analyse des contraintes résiduelles par l¿interférométrie de Speckle.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  13. Sébastien Rouquette, Choumad Ould, Emmanuelle Rouhaud, Manuel François, Jean-Louis Chaboche,
    Modélisation thermo-élasto-plastique du procédé de grenaillage par la méthode des éléments finis.
    17ème congrès français de mécanique, Troyes, Août 2005, 6.
    2005.
  14. Bruno Guelorget, Manuel François, C Vial, Laurent Daniel, Jian Lu,
    Mesure de vitesse de déformation par interférométrie électronique de granularité laser (ESPI) sur une tôle de cuivre mi-dur en traction : un nouveau regard sur l'amorçage de la localisation.
    cmoi, marseille, Novembre 2005, 6.
    2005.
  15. Matthieu Micoulaut, Delphine Retraint, Pascal Viot, Manuel François,
    Grenaillage ultrasonore hétérogène.
    17ème congrès français de mécanique, Troyes, Août 2005, 119–124.
    2005.
  16. Emmanuelle Rouhaud, A. Ouakka, C. Ould, J.-L. Chaboche, Manuel François,
    Finite Element model of Shot Peening, Effects of Material’s Constitutive Law.
    Proceedings of the 9th International Conference on Shot Peening (ICSP9), Paris France, 6-9 septembre 2005.
    2005.
  17. Bruno Guelorget, Raul Cordero, Manuel François, Cristian Vial-Edwards, Ignacio Lira,
    Detection par ESPI de la localisation des déformations plastiques dans des tôles d'aluminium.
    Journée scientifique AFM progrès récents des méthodes optiques dans des conditions extrêmes (grandes déformation forte localisation) en mécanique expérimentale, Poitiers, Mai 2003, 6.
    2003.
  18. Celine Pile, Delphine Retraint, Manuel François, Jian Lu,
    Détermination par la méthode du trou incrémental des contraintes résiduelles dans un alliage TiAl grenaillé par ultrasons.
    Colloque caractérisation expérimentales des contraintes : techniques avancées et nouveaux matériaux, Troyes (France), MARS 2002, 6.
    2002.
  19. Bruno Guelorget, David Gloaguen, Manuel François,
    Evolution de la dureté : un échantillon de Zirconium déformé plastiquement.
    Tarbes (France), NOVEMBRE 2001.
    2001.

Conference talks with no proceedings

  1. Amélie Morançais, Manuel François, Pascale Kanouté, Mathieu Fèvre, Anaïs Gaubert,
    Prise en compte de l’effet du grenaillage dans l’analyse de durée de vie des aubes de turbine monocristallines.
    journée MAIA, SafranTech.
    2015.
  2. Amélie Morançais, Manuel François, Pascale Kanouté, Mathieu Fèvre, Anaïs Gaubert,
    Prise en compte de l’effet du grenaillage dans l’analyse de durée de vie des aubes de turbine monocristallines.
    Journées de Printemps de la Commission Fatigue de la SF2M.
    2015.
  3. Mathieu Fèvre, Amélie Morançais, Manuel François,
    Détermination des contraintes résiduelles dans les monocristaux, application aux superalliages.
    Colloque Rayons X & Matière, Grenoble, 1-4 décembre 2015.
    2015.
  4. Chengheri Bao, Léa Le Joncour, Manuel François,
    Strain Localization monitored by Speckle Pattern Interferometry.
    European Mechanics of Materials Conference (EMMC-14) Gothenburg Sweden August 27-29 2014.
    2014.
  5. Chengheri Bao, Léa Le Joncour, Manuel François,
    Necking of a Metallic Thin Sheet Followed by Speckle Pattern Interferometry.
    ASME 2014 International Mechanical Engineering Congress Montreal 14-20 Nov. 2014.
    2014.
  6. Emmanuelle Rouhaud, F. Dussoulier, Matthieu Micoulaut, Jawad Badreddine, Sebastien Remy, Delphine Retraint, Donato Galitelli, Guillaume Montay, Manuel François, Vincent Desfontaine, Pierre Renaud,
    Model of shot dynamics for shotpeening of parts with complex geometries.
    First International Conference on Computational methods in Manufacturing (ICOMP14) Saint-Etienne, France.
    2014.
  7. Donato Gallitelli, Emmanuelle Rouhaud, Delphine Retraint, Jawad Badreddine, Carl Labergère, Manuel Francois,
    From process parameters to residual stress field: complete ultrasonic shot peening simulation.
    12th International Conference on Shot Peening (ICSP-12) Goslar, Germany.
    2014.
  8. Jawad Badreddine, Emmanuelle Rouhaud, Delphine Retraint, Matthieu Micoulaut, Manuel François,
    Modeling of ultrasonic shot peening: dynamic of shot during the peening process.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  9. Jawad Badreddine, Matthieu Micoulaut, Emmanuelle Rouhaud, Delphine Retraint, Manuel François,
    Modeling of ultrasonic shot peening : Dynamic of shot during the peening process.
    ECRS-8, Riva del Garda , June 2010.
    2010.
  10. Cochennec F., Emmanuelle Rouhaud, Manuel François, Lionel Roucoules,
    Eigenstrain based model for incremental hole drilling residual stress measurement.
    8th European Conference on Shot Peening, ECRS8, Riva del Garda, Italie, 26-28 June.
    2010.
  11. A. Maras, Guillaume Montay, O. Sicot, Emmanuelle Rouhaud, Manuel François,
    Residual strain and stress analysis by Speckle Interferometry combined with the drill of a groove.
    Proceedings of the 13rd International Conference on Experimental Mechanics (ICEM13), Alexandroupolis Grèce, 1- 6 juillet 2007..
    2007.
  12. S. Rouquette, Emmanuelle Rouhaud, Arjen Roos, H. Pron, Manuel François, C. Bissieux,
    Thermomechanical modeling of a steel plate impacted by a shot and experimental validation..
    The 7th European Conference on Residual Stresses (ECRS7), Berlin Allemagne, 13-15 septembre 2006..
    2006.

Conference posters

  1. Alicia Duran, Javier Signorelli, Diego Celentano, Maria Cruchaga, Manuel François,
    Numerical Simulation of the Forming Limit Curves of a Heat Treated AA110-H14 Aluminium Alloy Sheet using an Efficient Implementation of VPSC based MK model.
    WCCM 2014, ECCM V & ECFD VI, 20-25 juillet 2014, Barcelone, Espagne.
    2014.
  2. Sabeur Msolli, Carl Labergère, Houssem Badreddine, Khemais Saanouni, Manuel François, Virginie Lacote,
    Experimental Characterization and Comparison of Plane and Corrugated Aluminium Sheets Behavior.
    ESAFORM 2013, Aveiro University, 22-24 avril 2013, Portugal.
    2013.
  3. Sofiane Achache, Salim Lamri, Mohamed Arab Pour Yazdi, Alain Billard, Manuel François, Frederic Sanchette.,
    Elaboration and characterization of Beta-titanium super elastic coatings (Beta-TSEC) obtained by dc magnetron sputtering..
    12th International Workshop onPlasma-Based Ion Implantation and Deposition, Poitiers, France,.
    2013.

Books or journal issues directions

  1. Manuel François, Guillaume Montay, Benoît Panicaud, Delphine Retraint, Emmanuelle Rouhaud,
    Proceedings of the 9th International Conference on Residual Stresses (ECRS-9).
    Adavanced Materials Research 996.
    Trans Tech Publications, 2014.