Peer-reviewed journal articles indexed in international databases

  1. Chuan Zhang, Julien Gardan, Feng Zhu, Houssem Badreddine, Xiao-Lu Gong,
    Thermal Behavior Analysis of open-Cell Metal Foams Manufactured by Rapid Tooling.
    Journal of Porous Media 20.
    BegellHouse, 2017.
  2. Yishi Su, Zhiqiang Li, Xiao-lu Gong, Qiubao Ouyang, Qiang Guo, Cuiping Guo, Jie Zhang, Di Zhang,
    Structural modeling and mechanical behavior of Metal-Porous-Polymer-Composites (MPPCs) with different polymer volume fractions.
    Composite Structures 153, 673–681.
    Elsevier, 2016.
  3. Feng ZHU, Chuan ZHANG, Xiao-lu GONG,
    Numerical analysis and comparison of the thermal performance enhancement methods for metal foam/ phase change material composite.
    Applied Thermal Engineering 109(Part A), 373–383.
    Elsevier, 2016.
  4. Yishi Su, Di Zhang, Xiao-Lu Gong, Min Shen,
    Mchanical behavior in bending deformation of thermoplastic composite laminates with different stacking sequences.
    Journal of Composite Materials 50(8), 1037–1048.
    SAGE journals, 2016.
  5. Khouloud Cheour, Mustapha Assarar, Daniel Scida, Rezak Ayad, Xiao-Lu Gong,
    Effect of Water Ageing on the Free Vibration Behaviour of Flax-Fibre Reinforced Composite Materials.
    Composite Structures 152(15), 259–266.
    2016.
  6. C Sacristán, Th Dupont, O Sicot, Ph Leclaire, K Verdière, RPanneton, Xiao-Lu Gong,
    A mixture approach to the acoustic properties of a macroscopically inhomogeneous porous aluminum in the equivalent fluid approximation.
    Journal of the Acoustical Society of America 14(4), 2847–2855.
    AIP Publishing, 2016.
  7. Xiaohui ZHANG, Xiao-Lu GONG, Guillaume MONTAY,
    The influences of compression temperature on the fiber structure and tensile properties of hemp reinforced polypropylene composites.
    Advanced Materials Research 1073-1076, 62–65.
    2015.
  8. Chuan Zhang, Feng Zhu, Houssem Badreddine, Xiao-lu Gong,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    Journal of Materials Science and Chemical Engineering 3, 113–118.
    Scientific Research, 2015.
  9. Chuan Zhang, Feng Zhu, Houssem Badreddine, Xiao-lu Gong,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    Journal of Materials Science and Chemical Engineering 3, 113–118.
    Scientific Rechearch, 2015.
  10. Shijie Zhu, Abel Cherouat, Houman Borouchaki, Xiao-Lu Gong,
    3D remeshing simulation of aluminum foams behavior under static load.
    Advanced Materials Research 1099, 17–24.
    Trans Tech Publications, 2015.
  11. Abel Cherouat, Shi Jie Zhu, Houman Borouchaki, Xiao-Lu Gong,
    3D Numerical Simulation of Aluminum Foams Behavior in Large Deformation.
    Applied Mechanics and Materials 749, 3–7.
    Trans Tech Publications, 2015.
  12. Jianfei Wang, Yishi Su, Xiao-Lu Gong,
    Thermo-mechanical Behavior Analysis of Pressure Infiltration Casting Process for Manufacturing Open-cell Metal Foam.
    Advanced Materials Research 853, 125–130.
    2014.
  13. Hongchang HAN, Xiao-Lu GONG,
    One-Step Green Treatment of Hemp Fiber Used in Polypropylene Composites.
    Polymer Composites DOI: 10.1002/pc.23191, DOI: 10.1002/pc.23191.
    2014.
  14. Si-Yuan He, Zong-Ren Jiang, Ge Dai, Yi Zhang, Xiao-Lu Gong,
    Manipulation of TiH2 decomposition kinetics for Two Steps Foaming method.
    Advanced Engineering Materials, 02/2014, 12.
    2014.
  15. Zhongmeng WEN, Xiao-Lu GONG,
    Influence of ageing effect on the residual stress distribution and mechanical behavior of carbon/epoxy composite laminates.
    Advanced Materials Research 996, 958–963.
    2014.
  16. Xiao-Lu GONG, Zhongmeng WEN, Yishi SU,
    Experimental Determination of Residual Stresses in Composite Laminates [0₂/θ₂]s.
    Advanced Composites Materials DOI: 10.1080/09243046.2014.937136.
    2014.
  17. HongChang HAN, Xiao-Lu GONG,
    Effect of fiber surface modification with different functional groups silane agents on mechanical properties of hemps/Polypropylene composites.
    Applied Mechanics and Materials 470, 23–26.
    2014.
  18. Yishi Su, Zhiqiang Li, Jiang, Xiao-Lu GONG, Genlian Fan, Di Zhang,
    Computational structural modeling and elastoplastic mechanical properties of carbon nanotube reinforced aluminum matrix composites.
    Materials Science and Engineering A 614, 273–283.
    2014.
  19. Xiao-Lu Gong, F. Zhao, D. Zhang,
    Study of Wear Properties of in situ TiB/TiC Reinforced Ti1100 Composites.
    Key Engineering Materials. Vol. 550, 107–113.
    Trans Tech Publications, 2013.
  20. Boyang Liu, Wang Zhang, Haoming Lu, Di Zhang, Xiao-Lu Gong,
    Novel Ag decorated biomorphic SnO2 inspired by natural 3D nanostructures as SERS substrates.
    Materials letters 66(74), 43–45.
    2012.
  21. Yishi Su, Xiao-Lu Gong,
    Mechanical properties of open-cell metal foams under low-velocity impact loading.
    World Journal of Engineering 9(4), 285–292.
    2012.
  22. Shuai Jin, Xiao-Lu Gong,
    Effect of Ultraviolet and Moisture Aging on the Mechanical Properties of Hemp Fibers Composites.
    Applied Mechanics and Materials 226, 1739–1742.
    2012.
  23. Abel Cherouat, Xiao-Lu Gong, Florent Ilczyszyn, S Jin, Guillaume Montay,
    Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers.
    International Journal of Advanced Materials Research 1, 270–273.
    2012.
  24. Yishi Su, Xiao-Lu Gong,
    An analytical stress-strain model for open-cell metal foam.
    Journal of porous media 15(12), 1137–1145.
    2012.
  25. Shuai Jin, Xiao-Lu Gong,
    Study of mechanical properties and performance of aging hemp fibers.
    world Jurnal of Engineering 8(4), 225–330.
    2011.
  26. Fei Zhao, Xiao-Lu Gong, Di Zhang,
    Strengthening mechanism of in-situ TiB/TiC reinforced Ti1100 composites.
    World Journal of Engineering 8, 1335–133.
    2011.
  27. Yishi Su, Xiao-Lu Gong,
    Porosity predication with microstructural method for open-cell aluminium foam.
    Journal Special Topics and Reviews in Porous Media 2(1), 65–72.
    2011.
  28. T. Dupont, Ph. Leclaire, Olivier Sicot, Xiao-Lu Gong, R. Panneton,
    Acoustic properties of air-saturated porous materials containing dead-end porosity.
    Journal of applied physics 110(9), 94903.
    2011.
  29. Z Liu, T Fan, D Zhang, Xiao-Lu Gong, J Xu,
    Hierarchically porous ZnO with high sensitivity and selectivity to H2S derived from biotemplates.
    Sensors and Actuators, B:Chemical 136, 499–509.
    2009.
  30. Nikolaz Garsot, Abel Cherouat, Yu Liu, Xiao-Lu Gong,
    Compressive Behavior of Porous Metal/Polymer Composite: Experiment and Numerical Modeling.
    POROUS METALS AND METALLIC FOAMS: METFOAM 2007 1, 391–394.
    2008.
  31. Nicolas Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Compressive Behavior of Porous Metal/Polymer Composite: Experiment and Numerical Modeling.
    POROUS METALS AND METALLIC FOAMS: METFOAM 2007 METFOAM 2007, 391–394.
    2008.
  32. Zhaoting Liu, Tongxiang Fan, Jiajun Gu, Di Zhang, Xiao-Lu Gong, Qixin Guo, Jiaqiang Xu,
    Preparation of Porous Fe from Biomorphic Fe2O3 Precursors with Wood Templates.
    Materials Transition 48(4), 878–881.
    2007.
  33. Yu Liu, Xiao-Lu Gong,
    Study on the Compressive behavior and energy absorption of Metal Porous Polymer Composite (MPPC) with an interpenetrating network structure.
    Transaction of nonferrous metals 16, 439–443.
    2006.
  34. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    Material Science Forum 524, 813–817.
    2006.
  35. S.Y. He, Xiao-Lu Gong, F. Chen,
    Sound absorption property of porous aluminum.
    Journal of Porous Media 8(6), 1–9.
    2005.
  36. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of residual stresses on the mechanical behavior of composite laminate materials.
    Advanced Composites Materials 14(4), 319–342.
    2005.
  37. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of residual stresses on the mechanical behavior of composite laminate materials.
    Advanced Composites Materials 14(4), 319–342.
    2005.
  38. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    Material Science Forum 490, 533–539.
    2005.
  39. Xiao-Lu Gong, Y. Liu, S.-Y. He, Jian Lu,
    Manufacturing and low-velocity impact response of a new composite material: Metal Porous Polymer Composite (MPPC).
    Journal of Materials Science and Technology 20, 65–68.
    2004.
  40. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the experimental parameters on the determination of residual stresses by using the incremental hold-drilling method.
    Composites science and technology 64, 171–180.
    2004.
  41. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the experimental parameters on the determination of residual stresses by using the incremental hold-drilling method.
    Composite Sciences and Technology 64, 171–180.
    2004.
  42. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of residual stress in composite laminates using the incremental hole-drilling method.
    Journal of Composite Materials 37(9), 831–844.
    2003.
  43. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of residual stress in composite laminates using the incremental hole-drilling method.
    Journal of Composite Materials 37(9), 831–844.
    2003.
  44. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Study of residual stresses in composite laminates by the finite element method and experimental analysis.
    Journal of Material Science Forum 404-407, 925–934.
    2002.
  45. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Influence of the residual stresses on the mechanical behaviour of advanced composite parts.
    Journal of Neutron Research 9(-1), 319–330.
    2001.
  46. A Laksimi, A Ahmed Benyahia, Xiao-Lu Gong, S Benmedakhene,
    Mode II delamination in + - q laminates : Analysis and optimisation.
    Advanced Composite Materials 9(3), 207–221.
    2000.
  47. A Laksimi, A Ahmed Benyahia, M.L Benzeggagh, Xiao-Lu Gong,
    Initiation and bifurcation mechanics in multi-directional laminates.
    Composites science and technology 60, 597–604.
    2000.
  48. Xiao-Lu Gong, Xiao-Jing Gong, A Laksimi, M.L Benzeggagh,
    Application of Tsai-Wu criterion to notched and unnotched composite laminates under torque loading.
    Journal of composite materials 34(6), 460–478.
    2000.
  49. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    Annales des composites 1, 65–69.
    1999.
  50. Xiao-Lu Gong, Abdel Laksimi, Malk Benzeggagh,
    Nouvelle approche de l'émission acoustique et son application à l'identification des mécanismes d'endommagement dans les matériaux composites.
    Revue des composites et des matériaux avancés 8(1), 7–23.
    1998.
  51. Xiao-Lu Gong, A Laksimi, D Lai, M.L Benzeggagh,
    Stress analysis in unidirectional composite plates under torque loading : Experimental observation.
    Journal of Reinforced Plastics and Composites 14(1), 29–44.
    1995.
  52. A Laskimi, Xiao-Lu Gong, M.L Benzeggagh,
    Damage mechanisms analysis in a centrally notched Glass-fiber/Epoxy plate.
    Composites science and technology 52, 85–91.
    1994.

Proceedings articles indexed in international databases

  1. Chuan ZHANG, Feng ZHU, Houssem BADREDDINE, Siyuan HE, Xiao-Lu GONG,
    Simulation of melting process of phase change materials in high mechanical property open-cell metal foams.
    International Conf. on Mech. of Complex Solids and Fluids (ICMCSF) 17-22 mai 2015, Lille, France.
    2015.
  2. Yi Zhang, Siyuan He, Xiao-Lu Gong, Ge Dai, Jin Yu,
    Radial density-graded foam-filled column for crushing performances.
    Fourth Int. Conference on Multifunctional, Hybrid and Nanomaterials. Sitges, Spain, 9-13 March 2015.
    2015.
  3. Feng ZHU, Jerome POULET, Xiao-Lu GONG,
    Numerical simulation of the casting defects of open-cell aluminium foam prepared by negative pressure infiltration.
    Energy & Materials Research Conference (EMR2015), Madrid, Spain, 25 to 27 February 2015.
    2015.
  4. Zhongmeng WEN, Xiao-Lu GONG,
    Influence of residual stresses on the damage of composite laminate under tensile loading.
    Second International Conference on Damage Mechanics (ICDM2) Troyes, France, 8-10 July 2015.
    2015.
  5. Feng ZHU, Jerome POULET, Siyuan HE, Xiao-Lu GONG,
    Effect of the manufacturing parameters on the defects in the open cell aluminum foam.
    Second International Conference on Damage Mechanics (ICDM2) Troyes, France, 8-10 July 2015.
    2015.
  6. Chuan ZHANG, Feng ZHU, Houssem BADREDDINE, Xiao-Lu GONG,
    A Modified Kelvin Model for Thermal Performance Simulation of High Mechanical Property Open-Cell Metal Foams.
    International Conf. on Adv. Composite Mat. (ACM) 19-21 July, 2015 Shanghai, China.
    2015.
  7. XiaoHui ZHANG, Xiao-Lu GONG, Guillaume MONTAY,
    The influences of compression temperature on the fiber structure and tensile properties of hemp reinforced polypropylene composites.
    International Conference on Energy, Environment and Sustainable Development (EESD 2014) Oct. 25-26, 2014 Nanjing, China.
    2014.
  8. ZhongMeng WEN, Xiao-Lu GONG,
    The influence of residual stresses on the mechanical behaviour of angle-ply composite laminates.
    16th European Conference for Composite Materials (ECCM16).
    Seville, Spain, 2014.
  9. Hongchang HAN, Xiao-Lu GONG,
    Investigation of humidity ageing mechanism of hemp fiber reinforced polypropylene composites.
    16th European Conference for Composite Materials (ECCM16), 22-26 June 2014 Seville, Spain, 8.
    2014.
  10. Zhongmeng WEN, Xiao-Lu GONG,
    Influence of ageing effect on the residual stress distribution and mechanical behavior of carbon/epoxy composite laminates.
    9th European Conference on Residual Stresses (ECRS 9) 7-10 july 2014, Troyes, France.
    2014.
  11. Hc Han, Xiao-Lu Gong,
    Effect of fiber surface modification with different functional groups silane agents on mechanical properties of hemps/Polypropylene composite.
    2nd International Conference on Mechanical Engineering, Materials Science and Civil Engineering (2nd ICMEMSCE2013), Oct.25-26, 2013 Beijing, China, 6.
    2013.
  12. Abel Cherouat, M Assarar, H Sabhi, Xiao-Lu Gong,
    Mechanical behavior of recycled polypropylene hemp fiber composite material.
    5th Int Conf. on Polymer Behavior , Aveiro Portugal, October 2012, 6.
    2012.
  13. Abel Cherouat, H Saidane, Xiao-Lu Gong, H Sabhi, M Assarar,
    Les matériaux composites et agro-composites : Mise en forme, Caractérisation et Modélisation.
    CRATT'2012 Conférence internationale, ISET Radès Tunisie, Octobre 2012, 6.
    2012.
  14. Yishi Su, Xiao-Lu Gong,
    Influence du taux de remplissage de polymère sur les propriétés en compression des métaux poreux polymères composites (MPPC).
    International Symposium on Aircraft Materials 2012, Fez Maroc, Mai 2012, 6.
    2012.
  15. Xiao-Lu Gong, Fei Zhao, Di Zhang,
    Etude expérimentale et numérique des propriétés de frottements des composites de matrice titane renforcée in situ par TiB/TiC.
    International Symposium on Aircraft Materials 2012, Fez Maroc, Mai 2012, 7.
    2012.
  16. Xiao-Lu Gong,
    Effect of ultraviolet and moisture aging on the mechanical properties of hemp fibers Composites.
    ICVSEM 2012, 2012 International Conference on Vibration, Structural Engineering and Measurement 19-21 oct. 2012 ShangHai China, 6.
    2012.
  17. F. Zhao, Xiao-Lu Gong, D. Zhang,
    The strengthen mechanism of in situ TiB/TiC reinforced Ti1100 composites and finite element analysis.
    ICCE 19, 19th Annual Int. Conf. on Comp. or Nano Eng, , 24-30 Juillet, 2011, Shanghai Chine,, 6.
    2011.
  18. Yishi Su, Xiao-Lu Gong,
    Study of dynamic drop impact response of open-cell metal foam.
    International Conference on Composites/Nano Engineering (ICCE-19), Shanghai Chine, July 2011.
    2011.
  19. Yishi Su, Xiao-Lu Gong,
    Study oF compressive properties of metal porous polymer composites under different temperature conditions.
    ICCM18, International Conference of Composite Materials , Jeju Island, KOREA, August 2011, 6.
    2011.
  20. Shuai Jin, Xiao-Lu Gong,
    Effects of ultraviolet aging on the mechanical properties of hemp fibers.
    International Conference on Composites/Nano Engineering (ICCE-19), shanghai Chine, July 2011, 6.
    2011.
  21. Abel Cherouat, Xiao-Lu Gong, Florent Ilczyszyn, Shuai Jin, Guillaume Montay,
    Effect of the fibre morphology and aging conditions on the mechanical properties of hemp fibers.
    The 2nd International Conference on Advances in Materials and Manufacturing Processes (2nd CAMMP), GuiLin Chine, December 2011, 6.
    2011.
  22. Jianfei Wang, Xiao-Lu Gong,
    Simulation of manufacturing process of aluminum foam-polymer composite.
    Advances and Trends in Engineering Materials and their Applications, AES-ATEMA¿2010 , Brixen, Dolomites ITALY, July 2010, 8.
    2010.
  23. T. Dupont, Olivier Sicot, Ph Leclaire, Xiao-Lu Gong,
    High sound pressure model for cellular metallic foam with semi open cells.
    EURONOISE 2009, Edinburgh, UK, October 2009, 10.
    2009.
  24. Xiao-Lu Gong, Abel Cherouat,
    Etude de l'indentation des mousses d'aluminium avec le pénétrateur de cône.
    9ème congrès de Mécanique, Marrakech, Maroc, Avril 2009, 4.
    2009.
  25. Nikolaz Garsot, Abel Cherouat, Xiao-Lu Gong,
    Numerical modelling of mechanical behaviour of Metal Porous Polymer Composite.
    6th International Forum on Advanced Material Science and Technology, HongKong, 11-14 June 2008.
    2008.
  26. N. Garsot, Abel Cherouat, Xiao-Lu Gong,
    Numerical modelling of mechanical behaviour of Metal Porous Polymer Composite.
    The 6th International Forum on Advanced Material Science and Technology, 12-14 June 2008, Hong Kong,, 6.
    2008.
  27. Zhaoting Liu, Tongxiang Fan, Di Zhang, Xiao-Lu Gong,
    Gas Sensing Properties of Biotemplated Porous ZnO.
    The 6th International Forum on Advanced Material Science and Technology, 12-14 June 2008, Hong Kong,, 3.
    2008.
  28. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Compressive behavior of porous metal/polymer composite : Experiment and numerical modeling.
    5th International conference on Porous Metals and Metallic Foams, Montréal - Québec, September 2008, 391–394.
    2008.
  29. Zhaoting Liu, Tongxiang Fan, Di Zhang, Xiao-Lu Gong,
    Optimization of Synthesis of Biomorphic Cellular Iron Oxide from Wood Templates.
    First int conf. on multidisciplinary design optimization and appl. avril 07 Besançon, CD, 4.
    2007.
  30. Xiao-Lu Gong, Yu Liu, Abel Cherouat, Nikolaz Garsot,
    On the compression behaviour of open-cell aluminium foams.
    CCTAM2007, Beijing Chine, Août 2007, 6.
    2007.
  31. Xiao-Lu Gong, Yu Liu, Nikolaz Garsot, Abel Cherouat,
    On the compression behaviour of open-cell aluminium foams.
    CCTAM2007, Chinese Conference of Theoretical and Applied Mechanics 2007, 19-23 août 2007, Beijing, CD, N° 002187, 6.
    2007.
  32. Yu Liu, Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Experimental and numerical study of the compression behaviour of open-cell aluminium foams.
    First int conf. on multidisciplinary design optimization and application, Besançon, Avril 2007, 8.
    2007.
  33. Yu Liu, Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Experimental and numerical study of the compression behaviour of open-cell aluminium foams.
    First int conf. on multidisciplinary design optimization and appl. avril 07 Besançon, CD, 4.
    2007.
  34. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Compressive behavior of Metal Porous - Polymer Composite (MPPC): experiment and numerical simulation.
    Metfoam Conference on Porous Metals and Metallic Foams Sep. 5-7, 2007 Montreal Canada, 8.
    2007.
  35. Abel Cherouat, Laurence Moreau, Houman Borouchaki, Xiao-Lu Gong, P. Lang,
    Advanced virtual procedures for simulating metal forming processes(conference invitee).
    International Workshop : Advencements in design optimization of materials, structures and mechanical systems, 17-20, dec. 2007, Xi’An China, 4.
    2007.
  36. Abel Cherouat, Laurence Moreau, Houman Borouchaki, Xiao-Lu Gong, P Lang,
    Advanced virtual procedures for simulating metal forming processes.
    International Workshop : Advencements in design optimization of materials, structures and mechanical systems, Xi'An Chine, December 2007, 12.
    2007.
  37. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    7th European Conference on Residual Stresses, Berlin (Allemagne), Septembre 2006.
    2006.
  38. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong, Abel Cherouat, Jian Lu,
    Dependence between aging treatments and residual stresses on composite laminate.
    7th European Conference on Residual Stresses, Berlin, Allemagne, 13-15 sep. 2006,, 6.
    2006.
  39. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat,
    Aging effect on residual stresses field in composite laminate.
    ECCM 12 : 12th European Conference on Composite Materials - 29 août-1er septembre 20, Biarritz, Août 2006, 8.
    2006.
  40. Olivier Sicot, Xiao-Lu Gong, Xiao-Jing Gong,
    Aging effect on residual stresses field in composite laminate.
    12th European Conference on Composite Materials, Biarritz France, sep. 2006, CD, 6.
    2006.
  41. Xiao-Lu Gong, Yu Liu, Siyuan He, Jian Lu,
    Manufacturing and low-velocity impact response of a new composite material : Metal Porous Polymer Composite (MPPC)”.
    4th Int. Forum on Advanced Material Science and Technology, France, Troyes 7-9 juillet. 2004, 6.
    2004.
  42. Siyuan He, Xiao-Lu Gong, Jian Lu, Y. Liu,
    Impact behavior of porous aluminum alloy under low velocity.
    Fifth Int. Symposium on Impact Eng. (ISIE 5), Cambridge UK 11-15 juillet 2004, 9.
    2004.
  43. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th International conference on residual stress, Xian (China) June 2004.
    2004.
  44. Guillaume Montay, Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Determination of the residual stresses in composite laminate using the compliance method.
    7th Inter. Conf. On Residual Stresses, Xi’An, Chine, Juin 2004 CD, 6.
    2004.
  45. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the residual stress on the mechanical behaviour of composite laminates during monotonous tensile and torque loading.
    Euromech 453, Saint-Etienne, December 2003.
    2003.
  46. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence of the residual stress on the mechanical behavior of composite laminates during monotonous tensile and torque loading.
    Euromech 453, Saint-Etienne, France, décembre 2003, CD, 6.
    2003.
  47. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Studies of residual stresses in composite laminates by the finite element method.
    6th Inter. Conf. On Residual Stresses, Coimbra, (Portugal), July 2002, 925–934.
    2002.
  48. Abel Cherouat, Xiao-Lu Gong, Olivier Sicot, Jian Lu,
    Studies of residual stresses in composite laminates by the finite element method.
    6th European Conference on Residual Stresses, Coimbra, Portugal, , juillet 2002, 925–934.
    2002.
  49. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Simulation of residual stresses in composite laminates by the finite element method 6th European Conference on residual stresses.
    6th European Conference on Residual stresses, Lisbone (Portugal), July 2002.
    2002.
  50. Xiao-Lu Gong, A Laksimi,
    Prediction of damage initiation in glass - epoxy composite under combined tension-torsion loading.
    13th International Conference of Composite Material (ICCM13), Pékin (Chine), June 2001, 1130.
    2001.
  51. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Effect of residual stresses on torque behaviors of composite laminate.
    13th International Conference of Composite Materials(ICCM13), Pékin (Chine).ISBN 7-9000-75-4, JUNE 2001, 1524.
    2001.
  52. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Influence of the residual stresses on the mechanical behaviour of advanced composite parts.
    International Conference Stress Evalutaion, Meca-sens 2000, Reims (France), DECEMBER 2000, 1.
    2000.
  53. Xiao-Lu Gong, Abel Cherouat, Olivier Sicot, Jian Lu,
    Determination of residual stresses in the case of composite laminate.
    6th International Conference on Residual Stresses, Oxford (United Kingdom), JULY 2000, 6.
    2000.
  54. Xiao-Lu Gong, Abel Cherouat, Xiao-Jing Gong, Jian Lu,
    Residual Stress distribution and its influence on the mechanical behaviour of composite laminates.
    12th International Conference of Composite Materials( ICCM12), Paris (France), JUILLET 1999, 1160.
    1999.
  55. Xiao-Lu Gong, Abel Cherouat, Xiao-Jing Gong, Jian Lu,
    Residual stress distribution and its influence on the mechanical behaviour of composite laminates.
    International Conference of Composite Materials, Paris (France), JULY 1999, 1160.
    1999.
  56. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Modèle numérique pour la caractérisation des contraintes résiduelles dans les matériaux multicouches.
    Congrès de Mécanique SMSM 4, Mohammadia (Maroc), AVRIL 1999, 1.
    1999.
  57. Abel Cherouat, Xiao-Lu Gong, Jian Lu,
    Modèle numérique pour la caractérisation des contraintes résiduelles dans les matériaux multicouches.
    SMSM'4, Congrès de Mécaniques, Mohammadia (Maroc), AVRIL 1999, 1.
    1999.
  58. Xiao-Lu Gong, A Laksimi, M.L Benzeggagh,
    Application de critère de Tsai-Wu dans le cas des composites soumis en torsion.
    SMSM'4, congrès de Mécaniques, Mohammadia (Maroc), AVRIL 1999, 79–80.
    1999.
  59. Xiao-Lu Gong, Abdel Laksimi, Malk Benzeggagh,
    Stress and damage analysis in composite plates under torque loadings.
    3eme Congres de Mecanique, Tetouan (MParoc), Avril 1997, 761–767.
    1997.
  60. Bounouas, Xiao-Lu Gong, Abdel Laksimi, Cherfaoui, Haddouth,
    Identification de l'endommagement dans le polypropylène renforcé par des fibres de verre.
    Congrès de Mécanique, SMSM 3, TETOUAN (Maroc), Avril 1997, 299–305.
    1997.
  61. Xiao-Jing Gong, Xiao-Lu Gong, Aivazzadeh, Malk Benzeggagh,
    Fier bridging in DCB specimens and its effects on R-curves of a glass/epoxy compositye.
    Internation conference on composite Materials ICCM 10, VANCOUVER (Canada), AOUT 1995, 117–124.
    1995.
  62. Xiao-Lu Gong, Abdel Laksimi, Dawei Lai, Malk Benzeggagh,
    Damage analysis of glass/epoxy plates under combined tension-torsion loadings.
    International Conference on composite Materials ICCM 10, VANCOUVER (Canada), AOUT 1995, 351–358.
    1995.

Unindexed proceedings articles

  1. C. Sacristan, T. Dupont, O. Sicot, P. Leclaire, K. Verdière, R. Panneton, Xiao-Lu Gong,
    Etude acoustique des mousses métalliques bicouches avec interface à gradient de propriétés.
    Congrès Francais d'Acoustique 2014 (CFA2014) Poitiers FRANCE 22-25 avril 2014,, 691–697.
    2014.
  2. M. Assarar, S. Buet, R. Ayad, Abel Cherouat, Xiao-Lu Gong,
    Effet de vieillissements contrôlés sur le comportement mécanique d’éco-composite à fibres de chanvre.
    JNC18, Journées Nationales sur les Composites, 12-14 Juin 2013 Nantes, 8.
    2013.
  3. Shuai Jin, Xiao-Lu Gong,
    Influence du vieillissement en humidité relative sur les propriétés mécaniques des fibres de chanvre.
    20ème Congrès Français de mécanique. CFM 2011 , Besançon France, Août 2011, 6.
    2011.
  4. Philippe Leclaire, Thoma Dupont, Xiao-Lu Gong, Olivier Sicot,
    Propriétés acoustiques de matériaux poreux saturés d'air incluant une porosité partiellement ouverte.
    10ème Congrès Francais d'Acoustique (CFA10) , Lyon, FRANCE , Avril 2010, 8.
    2010.
  5. Xiao-Lu Gong, Abel Cherouat,
    Etude de l’indentation des mousses d’aluminium avec le pénétrateur de cône.
    9 ème Congrès de Mécanique , Marrakech, Maroc, 21-24 Avril 2009, 4.
    2009.
  6. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Modélisation numérique du comportement en compression de Métal poreux -Polymère Composite par homogénéisation.
    18ème CFM 2007, Grenoble France, Août 2007, 6.
    2007.
  7. N. Garsot, Y. Liu, Abel Cherouat, Xiao-Lu Gong,
    Modélisation numérique de la compression de mousses métalliques d’aluminium avec cellules ouvertes.
    Matériaux 2006, 14-16 Nov. 2006 Dijon France, sur CD, 8.
    2006.
  8. Nikolaz Garsot, Yu Liu, Abel Cherouat, Xiao-Lu Gong,
    Modélisation numérique de la compression de mousses métalliques d¿aluminium avec cellules ouvertes.
    Matériaux 2006, Dijon, Dijon, Novembre 2006, 8.
    2006.
  9. Yu Liu, Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Etude expérimentale et numérique de l’indentation des mousses d’aluminium avec cellules ouvertes.
    Matériaux 2006, 14-16 Nov. 2006 Dijon France, sur CD, 8.
    2006.
  10. Yu Liu , Nikolaz Garsot, Xiao-Lu Gong, Abel Cherouat,
    Etude expérimentale et numérique de l'indentation des mousses d¿aluminium avec cellules ouvertes.
    Matériaux 2006, Dijon, Novembre 2006, 8.
    2006.
  11. Xiao-Lu Gong, Sy. He, Y. Liu, Olivier Sicot, Jian Lu,
    Elaboration et étude du comportement en compression d’un nouveau matériau composite :Métal Poreux Polymère Composite (MPPC).
    JNC 14, Compiègne, mars 2005, CD, 8.
    2005.
  12. Xiao-Lu Gong, Sy. He, Jian Lu, Y. Liu,
    Proposition d’un nouveau type de matériau composite : Mousse Métallique-Polymère Composite.
    Journée d’études techniques JET-3 2004, Marrakech Maroc 14-16 avril 2004, 5.
    2004.
  13. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Optimisation de la méthode du trou incrémental pour la mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  14. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Optimisation de la méthode du trou incrémental pour la mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    16ème Congrès Français de Mécanique, 1-5 sep 2003 Nice, CD ID.129, 6.
    2003.
  15. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles par la méthode du trou incrémental.
    13ème Journées Nationales des Composites, Strasbourg, Mars 2003.
    2003.
  16. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles par la méthode du trou incrémental.
    JNC13, Strasbourg, mars 2003, 1, 63–71.
    2003.
  17. Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Influence des paramètres expérimentaux sur la détermination des contraintes résiduelles dans les matériaux composites stratifiés.
    13ème Journées Nationales des Composites, Strasbourg, Mars 2003.
    2003.
  18. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Application de la méthode de la flèche à la détermination des contraintes résiduelles dans les composites stratifiés.
    16ème Congrès Français de Mécanique, Nice, France, Septembre 2003.
    2003.
  19. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Application de la méthode de la flèche à la détermination des contraintes résiduelles dans les composites stratifiés.
    16ème Congrès Français de Mécanique, 1-5 sep 2003 Nice, CD ID.182, 6.
    2003.
  20. Olivier Sicot, Guillaume Montay, Xiao-Lu Gong, Abel Cherouat,
    Approche des contraintes résiduelles dans les composites stratifiés par la méthode de la compliance.
    Colloque GFAC, Caractérisation expérimentale des contraintes : techniques avancées et nouveaux matériaux, Troyes, mars 2002, 173–178.
    2002.
  21. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu, P Olivier,
    Nouvelle méthode de mesure des contraintes résiduelles dans les matériaux composites stratifiés.
    12ème Journée Nationale des Composites, Paris (France), NOVEMBRE 2000, 9.
    2000.
  22. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d’un composite stratifié.
    AMAC, JST Composite, Compiègne, novembre 1999, 6.
    1999.
  23. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    AMAC, Colloque Composite, Compiègne (France), NOVEMBRE 1999.
    1999.
  24. Olivier Sicot, Xiao-Lu Gong, Abel Cherouat, Jian Lu,
    Importance des contraintes résiduelles sur le comportement mécanique d'un composite stratifié.
    AMAC, JST Composite, Compiègne (France), NOVEMBRE 1999.
    1999.
  25. Zhu Wu, Xiao-Lu Gong, Jian Lu,
    Nouvelle méthodologie de mesure de contraintes résiduelles par la technique de Moire interférométrie et la méthode du trou incrémental.
    JNC'11, ARCACHON (France), NOVEMBRE 1998 -1, 665–674.
    1998.
  26. Xiao-Lu Gong, A Laksimi, M.L Benzeggagh,
    Comportement en fatigue du composite en verre-époxyde sous chargement simple et combiné de traction/torsion.
    JNC'11, ARCACHON (France), NOVEMBRE 1998, 731–740.
    1998.
  27. Xiao-Lu Gong, A. Laksimi, D. Lai, M.L Benzeggagh,
    Etude de l'endommagement dans une plaque trouée verre/époxyde soumise à un couple de torsion.
    journée nationale sur les composites (JNC9) Saint-Etienne novembre 1994, 687–697.
    1994.
  28. Xiao-Lu Gong, Abdel Laksimi, Malk Benzeggagh,
    Méthodologie expérimentale d'analyse de l'endommagement de plaque trouée en verre/époxy.
    Journée nationale sur les composites (JNC8) Palaiseau novembre 1992, 425–426.
    1992.
  29. Ml. Benzeggagh, Xiao-Lu Gong, Xiao-Jing Gong, J.M. Roelandt,
    Evolution de la participation du mode II dans le cas d'un délaminage en mode mixte I+II d'un composite stratifié verre/époxy.
    journée nationale sur les composites (JNC7) Lyon novembre 1990, 509–517.
    1990.

Conference talks with no proceedings

  1. K.Cheour, M.Assarar, D.Scida, R.Ayad, Xiao-Lu Gong,
    Identification of damping properties of vegetal-fibre reinforced composites.
    1ière conférence Euromaghrébine des BioComposites, le 28-29 Mars 2016 à Marrakech, Maroc.
    2016.
  2. K Cheour, M Aaaarar, D Scida, R Ayad, Xiao-Lu Gong, JM Bertholot,
    Hybridation effect on the mechanical and dynamical properties of glass-flax and carbon-flax fibre reinforced epoxy composites.
    2nd International Conference on Mechanics of Composites. 11-14 July 2016 Porto, Portugal.
    2016.